1 aizvietošanas variants atrasts

Esošais Sūknis - Dziļurbums

Ražotājs Pedrollo
Produkta nosaukums 4SRm 1.5/13
Elektropieslēgums 1x230 V
Caurules pieslēgums Rp 32
Nominālā jauda P2 0,55 kW

Nomaiņas sūknis - Standard Apmaiņats komplekts

Produkta nosaukums TWU 4-0210-C EM
Artikula Nr. 6046690
MEI ≥ 0,7
Elektropieslēgums 1x230 V
Caurules pieslēgums Rp 32
Nominālā strāva 4,4 A
Nominālā jauda P2 0,55 kW
Šķidruma temperatūras diapazons +3 - +30 °C


Iespējamas uzstādīšanas izmaiņas, nomaiņas sūknim ir atbilstošs savienojuma diametrs.
Replacement pump has impeller made of PPE.
Max sand content 50 g/m3.

Produkta informācija
TWU 4-0210-C EM

TWU 4-0210-C EM
Artikula Nr.: 6046690

Your advantages
  • Parts that come in contact with fluids are corrosion-free
  • Integrated non-return valve
  • Low-wearing due to floating impellers
  • Maintenance-friendly motor
Multistage 4" submersible pump in jacketed construction for vertical and horizontal installation.

  • For water supply from boreholes and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • Pressure boosting
  • Lowering the water level
  • For pumping water without long-fibre and abrasive constituents
  • Multistage submersible-motor pump with radial or semi-axial impellers
  • Hermetically cast motors
  • Integrated non-return valve
  • NEMA coupling
  • Single-phase or three-phase motor
  • Integrated thermal motor protection for single-phase motor
Scope of delivery
  • Hydraulics + motor completely assembled
  • 1.5/1.75/2.5/4.0 m connection cable approved for drinking water (cross-section: 4x1.5 mm2)
  • Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch
  • Installation and operating instructions
Technical data
  • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
  • Submerged operating mode: S1
  • Fluid temperature: 3-30 °C
  • Minimum flow rate at motor: 0.08 m/s
  • Max. sand content: 50 g/m3
  • Max. number of starts: 20/h
  • Max. submersion depth: 200 m
  • Protection class: IP 68
  • Pressure connection: Rp 1¼ - Rp 2
  • Hydraulic housing: Stainless steel 1.4301
  • Impellers: Noryl
  • Hydraulics shaft: 1.4104 stainless steel
  • Motor housing: Stainless steel 1.4301
  • Motor shaft: 1.4305 stainless steel
Submersible-motor pump for vertical or horizontal installation.

Multistage submersible-motor pump with radial or semi-axial impellers in sectional construction. Integrated non-return valve. All parts in contact with the fluid are made of corrosion-free materials.

Corrosion-free single-phase or three-phase motor for direct starting.Sealed and hermetically cast motor with enamel-insulated winding, resin-impregnated, self-lubricating bearing, with water-glycol filling.

The motor is cooled by the fluid. The motor must always be operated in submerged state. The limit values for the max. fluid temperature and the minimum flow rate must not be exceeded. Vertical installation is possible optionally with or without cooling jacket. Cooling jacket is required for horizontal installation.