2 aizvietošanas varianti atrasti

Esošais Sūknis - Dziļurbums

Ražotājs Pedrollo
Produkta nosaukums 4SR 12/12
Elektropieslēgums 3x400 V
Caurules pieslēgums Rp 50
Nominālā jauda P2 3 kW

Nomaiņas sūknis - Standard Apmaiņats komplekts

Produkta nosaukums TWU 4.16-16-C 3~
Artikula Nr. 6082866
MEI ≥ 0,4
Elektropieslēgums 3x400 V
Caurules pieslēgums Rp 50
Nominālā strāva 7,3 A
Nominālā jauda P2 3 kW
Šķidruma temperatūras diapazons +3 - +30 °C

Komentāri

Iespējamas uzstādīšanas izmaiņas, nomaiņas sūknim ir atbilstošs savienojuma diametrs.
Replacement pump has impeller made of PPE.
Max sand content 50 g/m3.

Produkta informācija
TWU 4.16-16-C 3~

TWU 4.16-16-C 3~
Artikula Nr. : 6082866

Your advantages
  • Parts that come in contact with fluids are corrosion-free
  • Integrated non-return valve
  • Low-wearing due to floating impellers
  • Maintenance-friendly motor
Construction
Multistage 4" submersible pump in jacketed construction for vertical and horizontal installation.

Application
  • For water supply from boreholes and rainwater storage tanks
  • For domestic water supply, sprinkling and irrigation
  • Pressure boosting
  • Lowering the water level
  • For pumping water without long-fibre and abrasive constituents
Equipment/function
  • Multistage submersible-motor pump with radial or semi-axial impellers
  • Hermetically cast motors
  • Integrated non-return valve
  • NEMA coupling
  • Single-phase or three-phase motor
  • Integrated thermal motor protection for single-phase motor
Scope of delivery
  • Hydraulics + motor completely assembled
  • 1.5/1.75/2.5/4.0 m connection cable approved for drinking water (cross-section: 4x1.5 mm2)
  • Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch
  • Installation and operating instructions
Technical data
  • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
  • Submerged operating mode: S1
  • Fluid temperature: 3-30 °C
  • Minimum flow rate at motor: 0.08 m/s
  • Max. sand content: 50 g/m3
  • Max. number of starts: 20/h
  • Max. submersion depth: 200 m
  • Protection class: IP 68
  • Pressure connection: Rp 1¼ - Rp 2
Materials
  • Hydraulic housing: Stainless steel 1.4301
  • Impellers: Noryl
  • Hydraulics shaft: 1.4104 stainless steel
  • Motor housing: Stainless steel 1.4301
  • Motor shaft: 1.4305 stainless steel
Description/construction
Submersible-motor pump for vertical or horizontal installation.

Hydraulics
 Multistage submersible-motor pump with radial or semi-axial impellers in sectional construction. Integrated non-return valve. All parts in contact with the fluid are made of corrosion-free materials.

Motor
 Corrosion-free single-phase or three-phase motor for direct starting.Sealed and hermetically cast motor with enamel-insulated winding, resin-impregnated, self-lubricating bearing, with water-glycol filling.

Cooling
 The motor is cooled by the fluid. The motor must always be operated in submerged state. The limit values for the max. fluid temperature and the minimum flow rate must not be exceeded. Vertical installation is possible optionally with or without cooling jacket. Cooling jacket is required for horizontal installation.

Nomaiņas sūknis - Premium Apmaiņats komplekts

Produkta nosaukums TWI 4.14-13-CI 3~
Artikula Nr. 6081547
MEI ≥ 0,4
Elektropieslēgums 3x400 V
Caurules pieslēgums Rp 50
Nominālā strāva 7,4 A
Nominālā jauda P2 3 kW
Šķidruma temperatūras diapazons +3 - +30 °C

Komentāri

Iespējamas uzstādīšanas izmaiņas, nomaiņas sūknim ir atbilstošs savienojuma diametrs.
Replacement pump has impeller made of stainless steel.
Max sand content 50 g/m3.

Produkta informācija
TWI 4.14-13-CI 3~

TWI 4.14-13-CI 3~
Artikula Nr. : 6081547

Your advantages
  • Long service life thanks to corrosion-resistant stainless steel, optionally available in V4A quality
  • ACS certified for drinking water applications
  • A high degree of flexibility thanks to versions in the 4, 6, 8 and 10-inch area
  • High range of performance from 1 to 250 m³/h
Construction
Multistage 4" submersible pump in tie strap version for vertical or horizontal installation.

Application
  • For water and drinking water supply from boreholes and rainwater storage
  • Process water supply
  • For municipal water supply, sprinkling and irrigation
  • Pressure boosting
  • Lowering of the water level
  • For pumping water in industrial applications
  • For pumping water without long-fibre and abrasive constituents
Equipment/function
  • Multistage submersible-motor pump with radial or semi-axial impellers
  • Integrated non-return valve
  • NEMA coupling
  • Single-phase or three-phase AC motor
  • Hermetically sealed motors
Scope of delivery
  • Hydraulics + motor completely assembled
  • 1.5/2.5 m connection cable drinking water approval (cross-section: 4 x 1.5 mm2)
  • Single-phase version including switchbox with capacitor, thermal motor protection and On/Off switch
  • Installation and operating instructions
Technical data
  • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
  • Submerged operating mode: S1
  • Fluid temperature: 3 – 30 °C
  • Minimum flow rate at motor: 0.1 m/s
  • Max. sand content: 50 g/m3
  • Max. number of starts: 20/h
  • Max. immersion depth: 150 m
  • Protection class: IP68
  • Pressure connection: Rp 1¼ – Rp 2
Materials
  • Hydraulics housing: Stainless steel 1.4301
  • Impellers: Stainless steel 1.4301
  • Hydraulic shaft: Stainless steel 1.4057
  • Motor housing: Stainless steel 1.4301
  • Motor shaft: Stainless steel 1.4305
Description/construction
Submersible pump with ACS approval for vertical or horizontal installation.

Hydraulics
 Multistage submersible-motor pump with 4" NEMA connection and radial or semi-axial impellers with sectional construction. Integrated non-return valve. All parts that come in contact with the fluid are made of corrosion-free materials.

Motor
 Corrosion-free single-phase or three-phase motor for direct starting. Sealed and hermetically cast motor, resin-impregnated, with enamel-insulated winding, self-lubricating bearing, with water-glycol filling.

Cooling
 The motor is cooled by the pumped fluid. The motor must always be immersed when operated. The limit values for maximum fluid temperature and minimum flow velocity must be adhered to. Vertical installation is possible with or without cooling jacket. Horizontal installation must be performed in conjunction with a cooling jacket.

Pressure shroud
 The pressure shroud is used for the direct installation of the unit in the pipe system. Standard models are without mounted non-return valves. The maximum inlet pressure is 10 bar.