1 aizvietošanas variants atrasts

Esošais Sūknis - Drenāža un kanalizācija

Ražotājs Pedrollo
Produkta nosaukums VXC 20/50
Elektropieslēgums 3x400 V
Caurules pieslēgums Rp 65
Nominālā jauda P2 1,5 kW

Nomaiņas sūknis Apmaiņats komplekts

Produkta nosaukums Rexa FIT V06-214 -A
Artikula Nr. 6064701
Elektropieslēgums 3x400 V
Caurules pieslēgums DN 65/80
Nominālā strāva 3,4 A
Nominālā jauda P2 1,5 kW
Šķidruma temperatūras diapazons +3 - +40 °C
Brīvā caurplūde 65

Komentāri

Iespējamas izmaiņas uzstādīšanā, nomaiņas sūknim ir novirzīts savienojuma diametrs.

Produkta informācija
Rexa FIT V06-214 -A

Rexa FIT V06-214 -A
Artikula Nr. : 6064701

Your advantages
  • Ready-to-plug and immediately ready to go (A and P version)
  • Attached float switch (A-model) enables easy operation
  • Safe vortex hydraulics with large, free ball passage to prevent clogging during operation
  • Sealing chamber with optional external monitoring
  • Lightweight
Construction
Submersible sewage pump for intermittent operation for stationary and portable wet well installation.

Application
Pumping of:
  • Sewage containing faeces in accordance with EN 12050-1
  • Wastewater
Equipment/function
  • Winding temperature monitoring with bimetal strip
  • Optional external pencil electrode for sealing chamber control
Scope of delivery
  • Submersible sewage pump with 10 m cable
  • Cable version depending on the variant:
  • With bare cable ends (O)
  • With plug (P)
  • With float switch and plug (A)
  • Operating and maintenance manual
Technical data
  • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
  • Submerged operating mode: S1
  • Non-immersed operating mode: S2-15 min; S3 10%
  • Protection class: IP68
  • Insulation class: F
  • Fluid temperature: 3 – 40 °C, max. 60 °C for 3 min
  • Free passage: 50 / 65 / 80 mm
  • Cable length: 10 m
Materials
  • Motor housing: 1.4301
  • Hydraulics housing: EN-GJL 250
  • Impeller: EN-GJL 250
  • Static gaskets: NBR
  • Sealing on pump side: SiC/SiC
  • Sealing on motor side: C/MgSiO4
  • Shaft end: Stainless steel 1.4021
Description/construction
Submersible sewage pump as submersible monobloc unit for stationary and portable wet well installation in intermittent operation.

Hydraulics
 The outlet on the pressure side is designed as horizontal flange connection. The maximum possible dry matter is 8 % (depending on the hydraulics). Vortex impellers are used as the impeller shape.

Motor
 The motors available are surface-cooled motors in single-phase version (with built-in operating capacitor) and three-phase version for the direct starting. The waste heat is given off directly to the surrounding fluid via the motor housing. These motors can operated immersed in continuous duty (S1) and non-immersed in short-time duty (S2) or intermittent periodic duty (S3).

Furthermore the motors are equipped with thermal motor monitoring. This protects the motor windings against overheating. For units with single-phase AC motors this is built-in and switches automatically. I.e. if the motor is switched off due to overheating and then cools down it is automatically switched on again. Bimetallic strips are used for this as standard.

In addition the motor can be equipped with an external sealing chamber electrode for monitoring the oil barrier chamber. This signals if there is water ingress into the oil barrier chamber through the mechanical seal on the fluid side.

The connection cable has a length of 10 m as standard and is available in following versions:
  • With bare cable ends
  • With plug
  • With float switch and plug
Seal
 There is a sealing chamber between the motor and hydraulics. This is filled with medicinal white oil. The fluid-side and motor-side seals are provided by two mechanical seals which rotate independently of each other.
MATING FLANGE DN65-2"½-STZN
Artikula Nr.: 4015204
Counterflange:
  • Made of cast iron.
  • Comes complete with flange, bolts and nuts, as well as gaskets.
chainkit PCS 400KG 1.4401 5M CE neutral
Artikula Nr.: 6063136
Chain:
  • Maximum pump weight 400kg.
  • Made of acid-resistant steel (1.4401).
  • Length 5 meters.
suspension device DN80/2RK SB
Artikula Nr.: 6082333
Coupling:
  • Intended for pumps in the Rexa series.
  • Connection DN 80/65.
QUADRANT-PIPE-DN65
Artikula Nr.: 4015212
Elbow:
  • Intended for pumps in the Rexa series.
  • 90 degrees.
RIBBED-BUSH-DN65-STAINLESS-STEEL-316L
Artikula Nr.: 4015210
Hose fitting:
  • Intended for submersible pumps. Includes hose clamp.
NON-RETURN-DEVICE DN65 PN10 Z GG25 CPL.
Artikula Nr.: 2017167
Check Valve:
  • Intended for pumps in the Rexa series.
  • Connection DN 65 PN10.
GATE VALVE DN65 PN10 GG25 CPL.
Artikula Nr.: 2017161
Stop Valve:
  • Intended for pumps in the Rexa series.
  • Connection DN 65 PN10.
PRESSURE HOSE ID.70 PN8 SYN. 10M
Artikula Nr.: 2014151
Pressure Hose:
 Intended for submersible pumps.
  • 10 m.
  • ø70 mm.
  • Max pressure 8 bar.
Pump foot DN50/65 KIT
Artikula Nr.: 6064666
Bottom foot Rexa:
  • Intended for Rexa pumps with connection DN 50/65.
Wilo-Control MS-Lift 1x4
Artikula Nr.: 2539741
EC-deklarācija

Microprocessor-controlled switchgear for level-dependent control of a submersible pump with float switch for level measurement. The parametrization is carried out using dip switches and potentiometers.
Wilo-Control MS-Lift 2x4
Artikula Nr.: 2539745
EC-deklarācija

Microprocessor-controlled switchgear for level-dependent control of a submersible pump with float switch for level measurement. The parametrization is carried out using dip switches and potentiometers.
Wilo-Control EC-Lift 1x12
Artikula Nr.: 2543210
EC-deklarācija

Microcontroller-controlled switchgear for level-dependent control of a submersible pump with analogue or digital signal transmitters. Individual parameters are entered via symbol-based menu navigation and an operating button.
Wilo-Control EC-Lift 2x12
Artikula Nr.: 2543220
EC-deklarācija

Microcontroller-controlled switchgear for level-dependent control of a submersible pump with analogue or digital signal transmitters. Individual parameters are entered via symbol-based menu navigation and an operating button.
DRAIN ALARM
Artikula Nr.: 2545133

Network-independent alarm switchgear (self-charging power supply unit) for wall fixation with optical and acoustic alarm signal. 
LEVEL SENSOR 0-1MWS, 10M CABLE
Artikula Nr.: 2519924

Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly.
LEVEL SENSOR 0-2,5mWS, 10m CABLE
Artikula Nr.: 2519921

Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly.
FLOAT SWITCH WA 65 (PSN-O) 5M
Artikula Nr.: 503211390

As a signal transmitter for the system switching, depending on the level of an open container or a cistern.
Switching points: up ON / down OFF
FLOAT SWITCH WA 65 (PSN-O) 10M +VP
Artikula Nr.: 503211893

As a signal transmitter for the system switching, depending on the level of an open container or a cistern.
Switching points: up ON / down OFF
FLOAT SWITCH MS 1
Artikula Nr.: 2004593

Float switches for level control devices as min./max switches for fluids that are aggressive or contain faeces, floats with the fluid and switches when tilted. Because of its construction and switching point, the float switch can exhibit only a very small hysteresis. This property cannot be changed, not even the length of the cable. In order to use the float switch, a switchgear with adjustable run-on time must be used. Switching: up "ON"/down "OFF"
Float switch WA KR1 S
Artikula Nr.: 6082807

As a signal transmitter for the system switching, depending on the level of an open container or a cistern.
Switching points: up ON / down OFF