2
aizvietošanas varianti atrasti
Esošais Sūknis - Drenāža un kanalizācija
Ražotājs
Zenit
Produkta nosaukums
DG BluePRO 100/2/G40V A1BT/50
Elektropieslēgums
3x400 V
Caurules pieslēgums
Rp 40
Nominālā jauda P2
0,74 kW
Nomaiņas sūknis Apmaiņats komplekts
Produkta nosaukums
Rexa UNI-V05A/T008-540/A
Artikula Nr.
6097110
Elektropieslēgums
3x400 V
Caurules pieslēgums
DN 50
Nominālā strāva
1,83 A
Nominālā jauda P2
0,75 kW
Šķidruma temperatūras diapazons
+3 - +40 °C
Brīvā caurplūde
44
Komentāri
Uzstādīšanas pielāgošana, nomaiņas sūknim ir citāds pieslēguma diametrs.
Produkta informācija
Rexa UNI-V05A/T008-540/A
Rexa UNI-V05A/T008-540/A
Artikula Nr.
: 6097110
Your advantages
- Excellent reliability due to corrosion-free hydraulics for universal application and various fluids
- Easy installation thanks to its light weight, integrated capacitor at the single-phase motor and flange with integrated fixation
- Optimum efficiency and operational safety thanks to its vortex hydraulics and smooth surfaces
- Quick maintenance facilitated by direct access to the sealing chamber and pump housing
- Long maintenance interval thanks to its double seal and a high volume sealing chamber
Submersible sewage pump for intermittent operation for stationary and portable wet well installation.
Application
Pumping of:
- Sewage containing faeces in accordance with EN 12050-1
- Wastewater
- Fluids with a pH value of > 4.5
- Material version "B": Aggressive fluids, e.g. lake/sea water, condensate, distilled water
- Winding temperature monitoring with bimetallic strip
- Submersible sewage pump with 10 m cable
- Operating and maintenance manual
- Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
- Submerged operating mode: S1
- Non-immersed operating mode: S2-15 min; S3 10%
- Protection class: IP68
- Insulation class: F
- Fluid temperature: 3 – 40 °C, max. 60 °C for 3 min
- Free passage: 44 mm
- Cable length: 10 m
- Motor housing: 1.4301
- Hydraulics housing: PP-GF30 (copolymer)
- Impeller: PP-GF30 (copolymer)
- Static gaskets: NBR
- Sealing on pump side: SiC/SiC
- Sealing on motor side: NBR (V05), C/MgSiO4 (V06)
- Shaft end: Stainless steel 1.4401
Description/construction
Submersible sewage pump as submersible monobloc unit for stationary and portable wet well installation.
Hydraulics
The outlet on the pressure side is designed as horizontal flange connection. The maximum possible dry matter is 8 %. Vortex impellers are used as the impeller shape. A pump support foot is integrated into the hydraulics housing.
Motor
The motors available are surface-cooled motors in single-phase version (with built-in operating capacitor) and three-phase version for the direct starting. The waste heat is given off directly to the surrounding fluid via the motor housing. These motors can operated immersed in continuous duty (S1) and non-immersed in short-time duty (S2) or intermittent periodic duty (S3).
Furthermore the motors are equipped with thermal motor monitoring. This protects the motor windings against overheating. For units with single-phase AC motors this is built-in and switches automatically. I.e. if the motor is switched off due to overheating and then cools down it is automatically switched on again. Bimetallic strips are used for this as standard.
The connection cable has a length of 10 m as standard and is available in following versions:
- With bare cable ends
- With plug
- With float switch and plug
There is a sealing chamber between the motor and hydraulics. This is filled with medicinal white oil. The seal on the fluid side is provided by a mechanical seal.
FLANGE DN50/RP2" STZN KPL.
Artikula Nr.: 4027333
- Made of cast iron.
- Comes complete with flange, bolts and nuts, as well as gaskets.
chainkit PCS 400KG 1.4401 5M CE neutral
Artikula Nr.: 6063136
- Maximum pump weight 400kg.
- Made of acid-resistant steel (1.4401).
- Length 5 meters.
suspension device DN50/2RK SB
Artikula Nr.: 6070146
- Intended for pumps in the Rexa series.
- Connection DN 50 / 2RK.
KIT DISCHARGE DN50
Artikula Nr.: 4027344
- Hose DN 50/60 (PVC).
- 90 degrees.
NON-RETURN-DEVICE DN50 PN10 Z GG25 CPL.
Artikula Nr.: 2017166
- Intended for pumps in the Rexa series.
- Connection DN 50 PN10.
GATE VALVE DN50 PN10 GG25 CPL.
Artikula Nr.: 2017160
- Intended for pumps in the Rexa series.
- Connection DN 50 PN10.
Wilo-Control MS-Lift 1x4
Artikula Nr.: 2539741
Microprocessor-controlled switchgear for level-dependent control of a submersible pump with float switch for level measurement. The parametrization is carried out using dip switches and potentiometers.
Wilo-Control MS-Lift 2x4
Artikula Nr.: 2539745
Microprocessor-controlled switchgear for level-dependent control of a submersible pump with float switch for level measurement. The parametrization is carried out using dip switches and potentiometers.
Wilo-Control EC-Lift 1x12
Artikula Nr.: 2543210
Microcontroller-controlled switchgear for level-dependent control of a submersible pump with analogue or digital signal transmitters. Individual parameters are entered via symbol-based menu navigation and an operating button.
Wilo-Control EC-Lift 2x12
Artikula Nr.: 2543220
Microcontroller-controlled switchgear for level-dependent control of a submersible pump with analogue or digital signal transmitters. Individual parameters are entered via symbol-based menu navigation and an operating button.
DRAIN ALARM
Artikula Nr.: 2545133
Network-independent alarm switchgear (self-charging power supply unit) for wall fixation with optical and acoustic alarm signal.
LEVEL SENSOR 0-1MWS, 10M CABLE
Artikula Nr.: 2519924
Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly.
LEVEL SENSOR 0-2,5mWS, 10m CABLE
Artikula Nr.: 2519921
Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly.
FLOAT SWITCH WA 65 (PSN-O) 5M
Artikula Nr.: 503211390
As a signal transmitter for the system switching, depending on the level of an open container or a cistern.
Switching points: up ON / down OFF
Switching points: up ON / down OFF
FLOAT SWITCH WA 65 (PSN-O) 10M +VP
Artikula Nr.: 503211893
As a signal transmitter for the system switching, depending on the level of an open container or a cistern.
Switching points: up ON / down OFF
Switching points: up ON / down OFF
FLOAT SWITCH MS 1
Artikula Nr.: 2004593
Float switches for level control devices as min./max switches for fluids that are aggressive or contain faeces, floats with the fluid and switches when tilted. Because of its construction and switching point, the float switch can exhibit only a very small hysteresis. This property cannot be changed, not even the length of the cable. In order to use the float switch, a switchgear with adjustable run-on time must be used. Switching: up "ON"/down "OFF"
Float switch WA KR1 S
Artikula Nr.: 6082807
As a signal transmitter for the system switching, depending on the level of an open container or a cistern.
Switching points: up ON / down OFF
Switching points: up ON / down OFF
Nomaiņas sūknis Apmaiņats komplekts
Produkta nosaukums
Rexa MINI3 V04.13/M08-523/A-5m
Artikula Nr.
3094007
Elektropieslēgums
1x230 V
Caurules pieslēgums
Rp 40
Nominālā jauda P2
0,75 kW
Brīvā caurplūde
40
Komentāri
Iespējamas uzstādīšanas izmaiņas, nomaiņas sūknim ir atbilstošs savienojuma diametrs.
Ievērībai: 1~.
Produkta informācija
Rexa MINI3 V04.13/M08-523/A-5m
Rexa MINI3 V04.13/M08-523/A-5m
Artikula Nr.
: 3094007
Your advantages
- High efficiency and operational reliability thanks to the optimised hydraulics
- Easy installation – even in narrow drainage pits – thanks to its lightweight, compact design with integrated condenser and threaded flange
- Reliable use in a variety of drainage applications thanks to the corrosion-free impeller and sealed cable inlet
- Longer maintenance intervals thanks to the high-volume sealing chamber and double seal
- Quick maintenance facilitated by direct access to the sealing chamber and pump housing
The Wilo-Rexa MINI3 is the ideal submersible pump for standard sewage in site drainage and domestic situations. Its 40mm free ball passage makes it suitable for pumping wastewater and sewage free of faeces. The pump can be used flexibly for both stationary and portable wet well installations. If the pump is installed in the DrainLift WS 50 pump chamber, sewage with faeces can be pumped: the system has an approval according to EN 12050-1. The optimised hydraulics provide high levels of reliability for universal application in the pumping of a diverse range of fluids. Its compact design means it can even be installed in narrow drainage pits. The oil-filled sealing chamber and a double seal allow for longer maintenance intervals. Direct access to the most important components makes carrying out maintenance work very convenient.
Construction
Submersible sewage pump for intermittent operation for stationary and portable wet well installation.
Application
Pumping of:
- Sewage not containing faeces
- Wastewater
Equipment/function
- Connection cable with
- Plug (version P)
- Plug and float switch (version A)
- Bare cable end (3~)
- Self-switching thermal motor monitoring
Pump with connection cable and:
- Plug (version P)
- Plug and float switch (version A)
- Bare cable end (3~)
- Installation and operating instructions
- Mains connection: 1~ 230 V, 50 Hz or 3~ 400 V, 50 Hz
- Submerged operating mode: S1
- Non-immersed operating mode: S3 15%
- Protection class: IP68
- Insulation class: F
- Fluid temperature: 3 ... 40 °C
- Free ball passage: 40 mm
- Pump housing: grey cast iron
- Impeller: composite
- Cover plate on suction port: stainless steel
- Motor housing: stainless steel
- Shaft: Stainless steel
- Seal on the motor side: NBR
- Seal on the fluid side: SiC/SiC
- Static seal: NBR
Submersible sewage pump as submersible monobloc unit for portable wet well installation in intermittent operation.
Hydraulics
Pump with vortex impeller and a free ball passage of 40 mm. Pressure connection as a vertical threaded connection.
Motor
Surface-cooled motor in single-phase version (with built-in operating capacitor) and three-phase current version for the direct starting. The waste heat is given off directly to the surrounding fluid via the motor housing. These motors can be operated immersed in continuous duty (S1) and non-immersed in intermittent operation (S3).
The motor is equipped with automatic thermal motor monitoring. This means that the motor is switched off if it overheats and is automatically switched on again once it has cooled down.
The connection cable has a length of 5 m or 10 m and is available in the following versions:
- With bare cable ends
- With plug
- With float switch and plug
The seal is created on the fluid side by a mechanical seal, and on the motor side by a rotary shaft seal. A sealing chamber with a white-oil filling is located between the gaskets.
GATE VALVE R1 ½"PN16 RED BRASS;
Artikula Nr.: 2525301
- Intended for pumps in the Rexa series.
- Connection G 40.
Wilo-Control MS-Lift 1x4
Artikula Nr.: 2539741
Microprocessor-controlled switchgear for level-dependent control of a submersible pump with float switch for level measurement. The parametrization is carried out using dip switches and potentiometers.
Wilo-Control MS-Lift 2x4
Artikula Nr.: 2539745
Microprocessor-controlled switchgear for level-dependent control of a submersible pump with float switch for level measurement. The parametrization is carried out using dip switches and potentiometers.
Wilo-Control EC-Lift 1x12
Artikula Nr.: 2543210
Microcontroller-controlled switchgear for level-dependent control of a submersible pump with analogue or digital signal transmitters. Individual parameters are entered via symbol-based menu navigation and an operating button.
Wilo-Control EC-Lift 2x12
Artikula Nr.: 2543220
Microcontroller-controlled switchgear for level-dependent control of a submersible pump with analogue or digital signal transmitters. Individual parameters are entered via symbol-based menu navigation and an operating button.
DRAIN ALARM
Artikula Nr.: 2545133
Network-independent alarm switchgear (self-charging power supply unit) for wall fixation with optical and acoustic alarm signal.
LEVEL SENSOR 0-1MWS, 10M CABLE
Artikula Nr.: 2519924
Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly.
LEVEL SENSOR 0-2,5mWS, 10m CABLE
Artikula Nr.: 2519921
Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly.
FLOAT SWITCH WA 65 (PSN-O) 5M
Artikula Nr.: 503211390
As a signal transmitter for the system switching, depending on the level of an open container or a cistern.
Switching points: up ON / down OFF
Switching points: up ON / down OFF
FLOAT SWITCH WA 65 (PSN-O) 10M +VP
Artikula Nr.: 503211893
As a signal transmitter for the system switching, depending on the level of an open container or a cistern.
Switching points: up ON / down OFF
Switching points: up ON / down OFF
FLOAT SWITCH MS 1
Artikula Nr.: 2004593
Float switches for level control devices as min./max switches for fluids that are aggressive or contain faeces, floats with the fluid and switches when tilted. Because of its construction and switching point, the float switch can exhibit only a very small hysteresis. This property cannot be changed, not even the length of the cable. In order to use the float switch, a switchgear with adjustable run-on time must be used. Switching: up "ON"/down "OFF"
Float switch WA KR1 S
Artikula Nr.: 6082807
As a signal transmitter for the system switching, depending on the level of an open container or a cistern.
Switching points: up ON / down OFF
Switching points: up ON / down OFF
