1 aizvietošanas variants atrasts

Esošais Sūknis - Drenāža un kanalizācija

Ražotājs Flygt, ITT, Lowara, Xylem
Produkta nosaukums CP 3101-MT ø431
Elektropieslēgums 3x400 V
Caurules pieslēgums DN 100

Nomaiņas sūknis Apmaiņats komplekts

Produkta nosaukums FA 10.33-208E T17-4/8H
Artikula Nr. 6047662
Elektropieslēgums 3x400 V
Caurules pieslēgums DN 100
Nominālā strāva 7,5 A
Nominālā jauda P2 3,5 kW
Šķidruma temperatūras diapazons +3 - +40 °C
Brīvā caurplūde 80

Nomaiņas papildpiederumi

Adapter 6030438
Artikula Nr. 6030438
Numurs 1

Komentāri

Saderīgs ar nomaiņas piederumiem.

Produkta informācija
FA 10.33-208E T17-4/8H

FA 10.33-208E T17-4/8H
Artikula Nr. : 6047662

Your advantages
  • Operationally reliable and efficient thanks to single-channel hydraulics with large, free ball passage
  • Process reliability thanks to optional monitoring for the sealing chamber
Construction
Submersible sewage pump without cooling system for continuous duty for stationary and portable wet well installation.

Application
Pumping of:
  • Sewage containing faeces
  • Pre-cleaned sewage without faeces and long-fibre components
  • Wastewater
Equipment/function
  • Heavy-duty version made of grey cast iron
  • Surface-cooled motor with Ex protection according to ATEX
  • Winding temperature monitoring
Scope of delivery
  • Submersible sewage pump ready for connection with 10 m connection cable without plug
  • Installation and operating instructions
Technical data
  • Mains connection: 3~400 V, 50 Hz
  • Submerged operating mode: S1
  • Non-immersed operating mode: S2-15 or S2-30
  • Protection class: IP68
  • Insulation class: H
  • Fluid temperature: 3…40 °C
  • Cable length: 10 m
  • Free ball passage from 45 mm to 100 mm
  • Max. immersion depth: 20 m
Materials
  • Pump housing: EN-GJL-250
  • Impeller: EN-GJL or EN-GJS
  • Static gaskets: NBR
  • Fluid-side seal: Mechanical seal made of SiC/SiC
  • Motor-side seal (depending on type): -Rotary shaft seal made of NBR - Mechanical seal made of SiC/SiC or carbon/ceramic
  • Motor housing: EN-GJL-250
  • Shaft: Stainless steel 1.4021
Description/construction
Submersible sewage pump as submersible monobloc unit for stationary and portable wet well installation.

Hydraulics
The outlet on the pressure side is designed as horizontal flange connection. The maximum possible dry matter content is 8 %, depending on the hydraulics and impeller type. The following impeller shapes are currently used:
  • Vortex impeller (W)
  • Single-channel impeller (E)
Each single-channel hydraulic system is equipped with an impeller wear ring and casing wear ring made of hardened material. These ensure long-term uniform efficiency of the unit and minimize maintenance costs.

Motor
Surface-cooled motors (T motor) do not have a cooling system of their own and emit their heat directly to the surrounding fluid via the housing parts. The motors can therefore be used in immersed state for continuous duty. Depending on their size, they can also be used in non-immersed state for short-time duty.

All motors have a sealing chamber that protects the motor from fluid ingress. It can be accessed from the outside and can optionally be monitored with a rod electrode. All filling fluids used are potentially biodegradable and environmentally safe.

The cable inlet is longitudinally watertight, the cable length is 10 m and the cable has free ends.

Seal
Fluid-side and motor-side sealing is possible in the following versions depending on the motor type:
  • Version H: Mechanical seal for the fluid side, rotary shaft seal for the motor side
  • Version G: Two independently-acting mechanical seals


Ex rating

The motors have ex-approvals according to the ATEX directive.
Wilo-Control MS-Lift 1x4
Artikula Nr.: 2539741

Microprocessor-controlled switchgear for level-dependent control of a submersible pump with float switch for level measurement. The parametrization is carried out using dip switches and potentiometers.
Wilo-Control MS-Lift 2x4
Artikula Nr.: 2539745

Microprocessor-controlled switchgear for level-dependent control of a submersible pump with float switch for level measurement. The parametrization is carried out using dip switches and potentiometers.
Wilo-Control EC-Lift 1x12
Artikula Nr.: 2543210

Microcontroller-controlled switchgear for level-dependent control of a submersible pump with analogue or digital signal transmitters. Individual parameters are entered via symbol-based menu navigation and an operating button.
Wilo-Control EC-Lift 2x12
Artikula Nr.: 2543220

Microcontroller-controlled switchgear for level-dependent control of a submersible pump with analogue or digital signal transmitters. Individual parameters are entered via symbol-based menu navigation and an operating button.
DRAIN ALARM
Artikula Nr.: 2545133

Network-independent alarm switchgear (self-charging power supply unit) for wall fixation with optical and acoustic alarm signal. 
LEVEL SENSOR 0-1MWS, 10M CABLE
Artikula Nr.: 2519924

Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly.
LEVEL SENSOR 0-2,5mWS, 10m CABLE
Artikula Nr.: 2519921

Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly.
FLOAT SWITCH WA 65 (PSN-O) 5M
Artikula Nr.: 503211390

As a signal transmitter for the system switching, depending on the level of an open container or a cistern.
Switching points: up ON / down OFF
FLOAT SWITCH WA 65 (PSN-O) 10M +VP
Artikula Nr.: 503211893

As a signal transmitter for the system switching, depending on the level of an open container or a cistern.
Switching points: up ON / down OFF
FLOAT SWITCH MS 1
Artikula Nr.: 2004593

Float switches for level control devices as min./max switches for fluids that are aggressive or contain faeces, floats with the fluid and switches when tilted. Because of its construction and switching point, the float switch can exhibit only a very small hysteresis. This property cannot be changed, not even the length of the cable. In order to use the float switch, a switchgear with adjustable run-on time must be used. Switching: up "ON"/down "OFF"
Float switch WA KR1 S
Artikula Nr.: 6082807

As a signal transmitter for the system switching, depending on the level of an open container or a cistern.
Switching points: up ON / down OFF