1 aizvietošanas variants atrasts

Esošais Sūknis - Drenāža un kanalizācija

Ražotājs Grundfos
Produkta nosaukums CC 9 A-1
Elektropieslēgums 1x230 V
Caurules pieslēgums G 32 inv.

Nomaiņas sūknis Apmaiņats komplekts

Produkta nosaukums TMW 32/11
Artikula Nr. 4058060
Elektropieslēgums 1x230 V
Caurules pieslēgums Rp 32
Nominālā strāva 3,6 A
Nominālā jauda P2 0,55 kW
Šķidruma temperatūras diapazons +3 - +35 °C
Brīvā caurplūde 10

Komentāri

Iespējamas uzstādīšanas izmaiņas, nomaiņas sūknim ir atbilstošs savienojuma diametrs.
Zemākais ūdens līmenis esošajam sūknim ir 3 mm, nomaiņas sūknim – 30 mm.

Produkta informācija
TMW 32/11

TMW 32/11
Artikula Nr. : 4058060

Your advantages
  • User-friendly – ergonomic handle, low weight, ready-to-plug version (Plug&Pump)
  • Operationally reliable – stainless steel-encapsulated motor with sheath flow cooling, mechanical seal and sealing chamber
  • Drain TMR with flat suction – minimal residual water level of 2 mm
Construction
Submersible drainage pump. 

Application
Pumping of:
  • Sewage without faeces or long-fibre constituents
  • Wastewater
Equipment/function
  • Connection cable with plug
  • Float switch
  • Self-switching thermal motor monitoring
  • Sheath current cooling
Scope of delivery
  • Pump with connection cable and plug
  • Fitted float switch (apart from TM 32/8-10)
  • Threaded connection with non-return valve (Drain TMW/TMR)
  • Hose connection, supplied (Drain TM)
  • Installation and operating instructions
Varying cable lengths:
  • 10M: 10 m connection cable
  • 30M: 30 m connection cable
Technical data
  • Mains connection 1~ 230 V, 50 Hz
  • Protection class: IP68
  • Max. immersion depth:
  • 4 m cable length: 1 m
  • 10 m cable length: 4 m
  • Fluid temperature: 3 ... 35 °C, briefly up to 3 min.: max. 90 °C
  • Pressure port:
  • Drain TM: G 1¼male
  • Drain TMW/TMR: G 1¼female
Materials
TM/TMW/TMR:
  • Motor housing 1.4301(AISI 304)
  • Pump housing: PP-GF30
  • Impeller: PPE/PS-GF20
  • Shaft: 1.4104 (AISI 430F)
Seal:
  • On motor side: NBR
  • Fluid side: Carbon/ceramic
TMW ... HD:
  • Motor housing 1.4404 (AISI 316L)
  • Pump housing: PP-GF30
  • Impeller: PPE/PS-GF20
  • Shaft: 1.4404 (AISI 316L)
Seal:
  • On motor side: NBR
  • Fluid side: Carbon/ceramic
Description/construction
Submersible pump for stationary and portable wet-well installation in fully automatic mode with attached float switch.

Hydraulics
The pumps are equipped with an open multi-vane impeller and have a free ball passage of 10 mm (TM/TMW) or 2 mm (TMR). The pressure connection is a vertical hose connection (TM) or threaded connection (TMW/TMR).

Motor
Sheath flow-cooled single-phase AC motor with integrated operating capacitor. The motor heat is transferred directly to the fluid via the motor housing.

The motor is equipped with automatic thermal motor monitoring. This means that the motor is switched off if it overheats and will be automatically switched on again once it has cooled down.

Seal
The seal is created on the fluid side by a mechanical seal, and on the motor side by a rotary shaft seal. A sealing chamber with a white-oil filling is located between the gaskets.

Cable
The pump is equipped with a 4 or 10 m long connection cable with a shockproof plug and a fitted float switch (not TM 32/8-10M).

Versions
  • Drain TMW with twister function - The twister function guarantees permanent turbulence within the pump's intake area. This prevents settling sediment from sinking and settling. This results in a clean pump sump and reduces the build-up of odours
  • Drain TMR with flat suction - The special strainer enables the fluid to be pumped out to a remaining level of 2 mm.
Wilo-Control MS-Lift 1x4
Artikula Nr.: 2539741

Microprocessor-controlled switchgear for level-dependent control of a submersible pump with float switch for level measurement. The parametrization is carried out using dip switches and potentiometers.
Wilo-Control MS-Lift 2x4
Artikula Nr.: 2539745

Microprocessor-controlled switchgear for level-dependent control of a submersible pump with float switch for level measurement. The parametrization is carried out using dip switches and potentiometers.
Wilo-Control EC-Lift 1x12
Artikula Nr.: 2543210

Microcontroller-controlled switchgear for level-dependent control of a submersible pump with analogue or digital signal transmitters. Individual parameters are entered via symbol-based menu navigation and an operating button.
Wilo-Control EC-Lift 2x12
Artikula Nr.: 2543220

Microcontroller-controlled switchgear for level-dependent control of a submersible pump with analogue or digital signal transmitters. Individual parameters are entered via symbol-based menu navigation and an operating button.
DRAIN ALARM
Artikula Nr.: 2545133

Network-independent alarm switchgear (self-charging power supply unit) for wall fixation with optical and acoustic alarm signal. 
LEVEL SENSOR 0-1MWS, 10M CABLE
Artikula Nr.: 2519924

Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly.
LEVEL SENSOR 0-2,5mWS, 10m CABLE
Artikula Nr.: 2519921

Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly.
FLOAT SWITCH WA 65 (PSN-O) 5M
Artikula Nr.: 503211390

As a signal transmitter for the system switching, depending on the level of an open container or a cistern.
Switching points: up ON / down OFF
FLOAT SWITCH WA 65 (PSN-O) 10M +VP
Artikula Nr.: 503211893

As a signal transmitter for the system switching, depending on the level of an open container or a cistern.
Switching points: up ON / down OFF
FLOAT SWITCH MS 1
Artikula Nr.: 2004593

Float switches for level control devices as min./max switches for fluids that are aggressive or contain faeces, floats with the fluid and switches when tilted. Because of its construction and switching point, the float switch can exhibit only a very small hysteresis. This property cannot be changed, not even the length of the cable. In order to use the float switch, a switchgear with adjustable run-on time must be used. Switching: up "ON"/down "OFF"
Float switch WA KR1 S
Artikula Nr.: 6082807

As a signal transmitter for the system switching, depending on the level of an open container or a cistern.
Switching points: up ON / down OFF