2 aizvietošanas varianti atrasti

Esošais Sūknis - Daudzpakāpju

Ražotājs Pedrollo
Produkta nosaukums PLURIJETm 4/80X-60CL
Elektropieslēgums 1x230 V
Caurules pieslēgums Rp 25 / Rp 25
Nominālā jauda P2 0,55 kW

Nomaiņas sūknis Apmaiņats komplekts

Produkta nosaukums HWJ 50 L 204 1~
Artikula Nr. 2549384
Elektropieslēgums 1x230 V
Caurules pieslēgums Rp 25
Nominālā strāva 6,2 A
Nominālā jauda P2 1,0 kW

Komentāri

Iespējamas uzstādīšanas izmaiņas, nomaiņas sūknim ir atbilstošs savienojuma diametrs.
Replacement pump has impeller made of stainless steel.
The replacement pump is equipped with a 50 liter pressure tank.
Replacement pump has higher motor power.

Produkta informācija
HWJ 50 L 204 1~

HWJ 50 L 204 1~
Artikula Nr.: 2549384

Your advantages
  • Ideal for outdoor applications (hobby, garden)
  • Rust-free stainless steel prevents corrosion, even with prolonged service life
  • Reduction of switch-on frequency and avoidance of fluid hammer, thanks to diaphragm pressure vessel with 20/50 l capacity
  • Electrical and hydraulic connections already in place, quick and safe to install
Construction
Self-priming water-supply unit .

Application
  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Pumping water from wells and out of tanks lying at greater depths
Equipment/function
  • Directly flanged motor
  • Pressure switch
  • Diaphragm pressure vessel (with replaceable diaphragm)
  • Connection cable with plug
  • Thermal motor protection switch
Scope of delivery
  • Pump
  • Pressure switch
  • Pressure gauge
  • Diaphragm pressure vessel (20/50 l)
  • Pressure hose with steel casing and screwed connection
  • Installation and operating instructions
Technical data
  • Mains connection, 1~230 V, 50 Hz
  • Suction head max. 8 m
  • Max. inlet pressure of 1 bar
  • Start-up pressure 1.5 bar
  • Variable switch-off pressure
  • Fluid temperature +5 °C to +35 °C
  • Max. operating pressure 6 bar
  • Protection class IP44
  • Connection on pressure side Rp 1
  • Suction-side connection G 1
Materials
  • Pump housing made of 1.4301 stainless steel
  • Impeller made of 1.4301 stainless steel
  • Shaft 1.4005 stainless steel
  • Mechanical seal made of carbon/ceramic
  • Stage chambers made of Noryl
  • Diffuser/injector made of Noryl
  • Seal made of NBR

Nomaiņas sūknis Apmaiņats komplekts

Produkta nosaukums HiMulti 3 H50-25 P 1~
Artikula Nr. 2549340
Elektropieslēgums 1x230 V
Caurules pieslēgums Rp 25
Nominālā strāva 3,3 A
Nominālā jauda P2 0,5 kW
Attālums no grīdas līdz centram 555 mm
Šķidruma temperatūras diapazons +5 - +35 °C

Komentāri

Iespējamas uzstādīšanas izmaiņas, nomaiņas sūknim ir atbilstošs savienojuma diametrs.
Replacement pump has impeller made of PPE/PS-GF30.
The replacement pump is equipped with a 50 liter pressure tank.
Replacement pump has less motor power.
Replacement pump has pump housing made of PA6T/6I-GF40.

Produkta informācija
HiMulti 3 H50-25 P 1~

HiMulti 3 H50-25 P 1~
Artikula Nr.: 2549340

Your advantages
  • Simple: Plug & Pump system
  • Efficient: Highly efficient hydraulics, low electricity consumption and very compact thanks to motor optimisation
  • Automatically functioning system, avoidance of fluid hammers thanks to pressure switching and diaphragm pressure vessel
  • Low-noise: Noise level between 56 dB(A) and 64 dB(A)
Construction
Water-supply system with diaphragm pressure vessel in non-self-priming version (HiMulti 3 H) or self-priming version (HiMulti 3 H P).

Application
  • Water supply (drinking water certification in accordance with ACS)
  • Sprinkling
  • Irrigation and spraying
  • Rainwater utilisation
Equipment/function
  • Directly flanged motor
  • Pressure switch
  • Diaphragm pressure vessel (with replaceable diaphragm)
  • Connection cable with plug
  • Thermal motor protection switch
Scope of delivery
  • Pump
  • Pressure switch
  • Pressure gauge
  • Diaphragm pressure vessel (contents 50 l or 100 l)
  • Pressure hose with steel housing and screwed connection
  • 1 piece plastic connector with seal for manual connection to the inlet pipe
  • Wilo-Connector (electrical quick connector)
  • Installation and operating instructions
Technical data
  • Mains connection: 1~230 V, 50 Hz
  • Perm. fluid temperature: 0 °C to +40 °C (+55 °C for 10 min)
  • Perm. ambient temperature: -15 °C to +40 °C
  • Permissible storage temperature: -30 °C to +60 °C
  • Max. permissible operating pressure: 8 bar
  • Max. permissible inlet pressure: 3 bar
  • Tank volume: 50 or 100 l
  • Configuration range for the pressure switch: 1-5 bar
  • Protection class IP 54
  • Pipe connection on pressure side: Rp1
  • Pipe connection on suction side: Rp1
Materials
  • Pump housing in Technopolymer with ACS, WRAS and KTW drinking certifications
  • Impellers and stage casing made of Noryl 30% GF with drinking water certification in accordance with ACS, WRAS and KTW
  • Pump cover and shaft made of stainless steel
  • Mechanical seal made of ceramic/carbon