2 aizvietošanas varianti atrasti

Esošais Sūknis - Daudzpakāpju

Ražotājs Pedrollo
Produkta nosaukums PLURIJETm 3/80X-24CL
Elektropieslēgums 1x230 V
Caurules pieslēgums Rp 25 / Rp 25
Nominālā jauda P2 0,48 kW
Attālums no grīdas līdz centram 132 mm

Nomaiņas sūknis Apmaiņats komplekts

Produkta nosaukums HWJ 20 L 203 1~
Artikula Nr. 2549380
Elektropieslēgums 1x230 V
Caurules pieslēgums Rp 25
Nominālā strāva 5,2 A
Nominālā jauda P2 0,75 kW

Komentāri

Iespējamas uzstādīšanas izmaiņas, nomaiņas sūknim ir atbilstošs savienojuma diametrs.
Replacement pump has impeller made of stainless steel.
Replacement pump has higher motor power.
The replacement pump is equipped with a 20 liter pressure tank.

Produkta informācija
HWJ 20 L 203 1~

HWJ 20 L 203 1~
Artikula Nr. : 2549380

Your advantages
  • Ideal for outdoor applications (hobby, garden)
  • Rust-free stainless steel prevents corrosion, even with prolonged service life
  • Reduction of switch-on frequency and avoidance of fluid hammer, thanks to diaphragm pressure vessel with 20/50 l capacity
  • Electrical and hydraulic connections already in place, quick and safe to install
Construction
Self-priming water-supply unit .

Application
  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Pumping water from wells and out of tanks lying at greater depths
Equipment/function
  • Directly flanged motor
  • Pressure switch
  • Diaphragm pressure vessel (with replaceable diaphragm)
  • Connection cable with plug
  • Thermal motor protection switch
Scope of delivery
  • Pump
  • Pressure switch
  • Pressure gauge
  • Diaphragm pressure vessel (20/50 l)
  • Pressure hose with steel casing and screwed connection
  • Installation and operating instructions
Technical data
  • Mains connection, 1~230 V, 50 Hz
  • Suction head max. 8 m
  • Max. inlet pressure of 1 bar
  • Start-up pressure 1.5 bar
  • Variable switch-off pressure
  • Fluid temperature +5 °C to +35 °C
  • Max. operating pressure 6 bar
  • Protection class IP44
  • Connection on pressure side Rp 1
  • Suction-side connection G 1
Materials
  • Pump housing made of 1.4301 stainless steel
  • Impeller made of 1.4301 stainless steel
  • Shaft 1.4005 stainless steel
  • Mechanical seal made of carbon/ceramic
  • Stage chambers made of Noryl
  • Diffuser/injector made of Noryl
  • Seal made of NBR

Nomaiņas sūknis Apmaiņats komplekts

Produkta nosaukums HiMulti 3 H50-24 P 1~
Artikula Nr. 2550646
Elektropieslēgums 1x230 V
Caurules pieslēgums Rp 25
Nominālā strāva 3,0 A
Nominālā jauda P2 0,4 kW
Attālums no grīdas līdz centram 555 mm
Šķidruma temperatūras diapazons +5 - +35 °C

Komentāri

Iespējamas uzstādīšanas izmaiņas, nomaiņas sūknim ir atbilstošs savienojuma diametrs.
Replacement pump has impeller made of PPE/PS-GF30.
Replacement pump has less motor power.
Replacement pump has pump housing made of PA6T/6I-GF40.
The replacement pump is equipped with a 20 liter pressure tank.

Produkta informācija
HiMulti 3 H50-24 P 1~

HiMulti 3 H50-24 P 1~
Artikula Nr. : 2550646

Your advantages
  • Simple: Plug & Pump system
  • Efficient: Highly efficient hydraulics, low electricity consumption and very compact thanks to motor optimisation
  • Automatically functioning system, avoidance of fluid hammers thanks to pressure switching and diaphragm pressure vessel
  • Low-noise: Noise level between 56 dB(A) and 64 dB(A)
Construction
Water-supply system with diaphragm pressure vessel in non-self-priming version (HiMulti 3 H) or self-priming version (HiMulti 3 H P).

Application
  • Water supply (drinking water certification in accordance with ACS)
  • Sprinkling
  • Irrigation and spraying
  • Rainwater utilisation
Equipment/function
  • Directly flanged motor
  • Pressure switch
  • Diaphragm pressure vessel (with replaceable diaphragm)
  • Connection cable with plug
  • Thermal motor protection switch
Scope of delivery
  • Pump
  • Pressure switch
  • Pressure gauge
  • Diaphragm pressure vessel (contents 50 l or 100 l)
  • Pressure hose with steel housing and screwed connection
  • 1 piece plastic connector with seal for manual connection to the inlet pipe
  • Wilo-Connector (electrical quick connector)
  • Installation and operating instructions
Technical data
  • Mains connection: 1~230 V, 50 Hz
  • Perm. fluid temperature: 0 °C to +40 °C (+55 °C for 10 min)
  • Perm. ambient temperature: -15 °C to +40 °C
  • Permissible storage temperature: -30 °C to +60 °C
  • Max. permissible operating pressure: 8 bar
  • Max. permissible inlet pressure: 3 bar
  • Tank volume: 50 or 100 l
  • Configuration range for the pressure switch: 1-5 bar
  • Protection class IP 54
  • Pipe connection on pressure side: Rp1
  • Pipe connection on suction side: Rp1
Materials
  • Pump housing in Technopolymer with ACS, WRAS and KTW drinking certifications
  • Impellers and stage casing made of Noryl 30% GF with drinking water certification in accordance with ACS, WRAS and KTW
  • Pump cover and shaft made of stainless steel
  • Mechanical seal made of ceramic/carbon