4
aizvietošanas varianti atrasti
Esošais Sūknis - Daudzpakāpju Sūkņa līkne
Ražotājs
Vecais Wilo
Produkta nosaukums
MVI 208 3~
Artikula Nr.
4024671
Kopējais garums
160 mm
Elektropieslēgums
3x400 V
Caurules pieslēgums
Rp 25 PN16
Nominālā jauda P2
1,5 kW
Sūkņa augstums
703 mm
Attālums no grīdas līdz centram
50 mm
Nomaiņas sūknis Apmaiņats komplekts
Produkta nosaukums
Helix V 410-1/16/E/KS/400-50
Artikula Nr.
4160528
MEI
≥ 0,7
IE
3
Kopējais garums
160 mm
Elektropieslēgums
3x400 V
Caurules pieslēgums
Rp 25 PN16
Nominālā strāva
3 A
Nominālā jauda P2
1,5 kW
Sūkņa augstums
875 mm
Attālums no grīdas līdz centram
50 mm
Šķidruma temperatūras diapazons
-30 - +120 °C
Komentāri
Saderīgs, neveicot izmaiņas cauruļvadu sistēmā.
Pārbaudiet darbības punktu, iespējams, piemērots arī Helix V 409.
If you are pumping chilled water media or special material requirements, please contact Wilo Technical Inside Sales. Always consult Wilo when pumping media other than water.
Replacement pump equiped with cartridge mechanical seal.
Produkta informācija
Helix V 410-1/16/E/KS/400-50
Helix V 410-1/16/E/KS/400-50
Artikula Nr.
: 4160528
Your advantages
- Efficiency-optimised, laser-welded 2D/3D hydraulics, flow and degassing optimised
- Corrosion-resistant impellers, guide vanes and stage housings
- Flow and NPSH-optimised pump housing
- Maintenance-friendly design with particularly robust coupling guard
- Drinking water approval for pumps with parts that come in contact with the fluid made of stainless steel (EPDM version)
Non-self-priming, high-efficiency multistage high-pressure centrifugal pump in vertical design with in-line connections.
Application
- Water supply and pressure boosting
- Industrial circulation systems
- Process water
- Closed cooling circuits
- Fire extinguishing systems
- Washing systems
- Irrigation
- Corrosion-resistant impellers, guide vanes and stage housings
- Helix V high-pressure multistage centrifugal pump
- Installation and operating instructions
- Helix V 2 – 16 (version PN16 with oval flanges): counter flanges made of stainless steel with the corresponding screws, nuts and gaskets
- Electrical connection:
- 3~400 V (±10 %), 50 Hz
- ≤ 4 kW 230 V/ 400 V; Δ/Y
- > 4 kW 400 V/ 690 V; Δ/Y
- 1~ 230 V (±10 %), 50 Hz, only Wilo-Helix V 2, 4, 6, 10
- Fluid temperature range:
- Helix V 2 – 16 (EPDM): -30 to 120 °C (130 °C on request)
- Helix V 2 – 16 for aggressive media (FKM): -15 to 90 °C
- Helix V22 – 52 (EPDM): -20 to 120 °C (130 °C on request)
- Helix V22 – 52 for aggressive media (FKM): -15 to 90 °C
- Max. operating pressure: 16/25/30 bar
- Max. inlet pressure of 10 bar
- Protection class: IP 55
- Max. ambient temperature: -15 °C – +50 °C (extended temperature ranges on request)
- Available versions:
- Helix V 2 – 16: PN 16 with oval flanges, PN 25/PN 40 with round flanges according to ISO 2531 and ISO 7005 (Victaulic coupling on request)
- Helix V 22 – 52: PN 16/PN 25/PN 40 with round flanges according to ISO 2531 and ISO 7005
Helix V 2, 4, 6, 10, 16:
Standard version
- Impellers, stage housings and guide vanes made of stainless steel 1.4307 (AISI 304L)
- Pump housing made of stainless steel 1.4301 (AISI 304)
- Baseplate and lantern in EN-GJL-250 (cataphoretic coated)
- Shaft made of stainless steel 1.4301 (AISI 304) or 1.4462 (AISI 318LN) (depending on version)
- Sleeve under the mechanical seal 1.4404 (AISI 316L)
- O-ring of EPDM (FKM gasket on request)
- Jacket pipe made of stainless steel 1.4301 (AISI 304)
- Impellers, stage housings and guide vane apparatuses of stainless steel 1.4404 (AISI 316L)
- Pump housing made of stainless steel 1.4404 (AISI 316L)
- Shaft made of stainless steel 1.4404 (AISI 316L) or 1.4462 (AISI 318LN) (depending on version)
- Sleeve under the mechanical seal 1.4404 (AISI 316L)
- O-ring of FKM (EPDM gasket on request)
- Jacket pipe made of stainless steel 1.4404 (AISI 316L)
Standard version
- Stage housings, impellers, guide vane apparatuses made of stainless steel 1.4307 (AISI 304L)
- Pump housing made of stainless steel 1.4308 (AISI 304) or cataphoretic-coated grey cast iron EN-GJL 250, loose flanges made of cataphoretic-coated grey cast iron EN-GJL 250 for Helix V 22 / EN-GJS 400 for Helix V 36-52.
- Shaft made of stainless steel 1.4057 (AISI 431)
- Sleeve under the mechanical seal 1.4404 (AISI 316L)
- O-ring of EPDM (FKM gasket on request)
- Jacket pipe made of stainless steel 1.4301 (AISI 304)
- Stage housings, impellers, and guide vane apparatuses made of stainless steel 1.4404 (AISI 316L)
- Pump housing: all parts which come in contact with the media are made of cast stainless steel 1.4409 (AISI 316L); loose flanges of cataphoretic-coated grey cast iron EN-GJL 250 for Helix V 22 / EN-GJS 400 for Helix V 36-52.
- Baseplate made of stainless steel 1.4301 (AISI 304)
- Shaft made of stainless steel 1.4404 (AISI 316L) or 1.4462 (AISI 318LN) (depending on version)
- Sleeve under the mechanical seal 1.4404 (AISI 316L)
- O-ring of FKM (EPDM gasket on request)
- Pressure shroud made of stainless steel 1.4404 (AISI 316L)
Description/construction
- Pumps can be adapted to specific circumstances on request (e.g. motor protection, IE4 motor efficiency class, VdS certified Wilo-Helix pumps, ATEX, extended ambient temperature range).
- The Helix series is also available with an integrated frequency converter.
Bypass kit Helix 2-16
Artikula Nr.: 4146788
Bypass kit for continuous ventilation of Helix pumps in series 2/ 4 / 6 / 10 / 16.
- Comes with pressure gauge.
- Suitable to use for all types of self and normal suction systems, e.g. irrigation, cooling towers etc.
BASE_PLATE_DAMPER_HELIX_PUMP_UP_TO_5.5kW
Artikula Nr.: 4157154
Foot plate is for mounting on foundation or floor. It fits all pumps in the Helix series with a maximum engine power of 5.5 kW.
- Pump housing (pump) is screwed into the foot plate with four bolts (dimension M8 or M10, depending on the pump size - see pump catalogue leaf), recommended length of bolt 40-70 mm.
- The foot plate is equipped with vibration dampers, one in each corner.
- Made of stainless steel.
- Dimensions: 405 x 90 x 405 mm (W x H x D).
SAFETY VALVE R3/4" RG 10BAR
Artikula Nr.: 500814696
The safety valve protects the system against overpressure when using water supply and pressure relief systems.
- Activation pressure 10% above the factory preset pressure.
- Allowed media - water without abrasive particles.
- Media temperature max 130 ° C.
- House made of plaster / brass.
- Seal made by Perbunan / EPDM.
SAFETY VALVE R3/4" RG 16BAR G851
Artikula Nr.: 2007147
The safety valve protects the system against overpressure when using water supply and pressure relief systems.
- Activation pressure 10% above the factory preset pressure.
- Allowed media - water without abrasive particles.
- Media temperature max 130 ° C.
- House made of plaster / brass.
- Seal made by Perbunan / EPDM.
CONNECTION -VB.WMS-CO-1MVI/MVIS/HELIX-6"
Artikula Nr.: 2504386
ASSEMBLY WMS. DE-EB. +VP
Artikula Nr.: 2521150
Pressure switch as low-water signal transmitter for direct connection to the suction-side pipe provided by the customer.
Connection to the joint tubing Rp ¼' threaded bushing.
The pressure switch locks at 1.0 bar and enables at 1.3 bar (factory works setting in accordance with DIN 1988).
The factory settings cannot be modified.
Connection to the joint tubing Rp ¼' threaded bushing.
The pressure switch locks at 1.0 bar and enables at 1.3 bar (factory works setting in accordance with DIN 1988).
The factory settings cannot be modified.
PRESS.SENSOR 1/4"0-6BAR 4-20MA M12 T528
Artikula Nr.: 2541618
PRESS.SENSOR 1/4"0-10BAR 4-20MA M12 T528
Artikula Nr.: 2541619
PRESS.SENSOR 1/4" 0-16 BAR
Artikula Nr.: 2541620
PRESS.SENSOR 1/4"0-25BAR 4-20MA M12 T528
Artikula Nr.: 2541621
PRESS.SENSOR 1/4"0-40BAR 4-20MA M12 T528
Artikula Nr.: 2541622
Nomaiņas sūknis Apmaiņats komplekts
Produkta nosaukums
Helix2.0-VE 208-1/16/E/S/3
Artikula Nr.
4250655
MEI
≥ 0,7
IE
5
Kopējais garums
160 mm
Elektropieslēgums
3x400 V
Caurules pieslēgums
Rp 25 PN16
Nominālā strāva
2,0 A
Nominālā jauda P2
1,1 kW
Sūkņa augstums
832 mm
Attālums no grīdas līdz centram
50 mm
Šķidruma temperatūras diapazons
-30 - +120 °C
Komentāri
Saderīgs, neveicot izmaiņas cauruļvadu sistēmā.
If you are pumping chilled water media or special material requirements, please contact Wilo Technical Inside Sales. Always consult Wilo when pumping media other than water.
Produkta informācija
Helix2.0-VE 208-1/16/E/S/3
Helix2.0-VE 208-1/16/E/S/3
Artikula Nr.
: 4250655
Augsta enerģijas efektivitāte pielietojumiem ar auksto ūdeni lielās ēkās.
Wilo-Helix2.0-VE ir jaunākā vertikālo daudzpakāpju sūkņu paaudze aukstā ūdens pielietojumiem lielās ēkās. Iebūvētais frekvences pārveidotājs apvienojumā ar regulēšanas funkcijām un IE5 EC motora piedziņu ļauj optimāli pielāgoties dažādiem spiediena apstākļiem un caurplūdes plūsmām. Rezultāts ir augsta enerģijas efektivitāte gan slēgtās, gan vaļējās iekārtās. Turklāt pārbaudītā Helix nerūsējošā tērauda hidraulika nodrošina augstu uzticamību. Krāsainais displejs ar pārskatāmām izvēlnēm un uzticamā „zaļās pogas tehnoloģija” nodrošina vienkāršu ekspluatācijas uzsākšanu un sūkņa darbināšanu. Sūkni var vienkārši iesaistīt ēkas automatizācijas sistēmā ar analogajām un digitālajām saskarnēm, kā arī CIF moduļiem.
Wilo-Helix2.0-VE ir jaunākā vertikālo daudzpakāpju sūkņu paaudze aukstā ūdens pielietojumiem lielās ēkās. Iebūvētais frekvences pārveidotājs apvienojumā ar regulēšanas funkcijām un IE5 EC motora piedziņu ļauj optimāli pielāgoties dažādiem spiediena apstākļiem un caurplūdes plūsmām. Rezultāts ir augsta enerģijas efektivitāte gan slēgtās, gan vaļējās iekārtās. Turklāt pārbaudītā Helix nerūsējošā tērauda hidraulika nodrošina augstu uzticamību. Krāsainais displejs ar pārskatāmām izvēlnēm un uzticamā „zaļās pogas tehnoloģija” nodrošina vienkāršu ekspluatācijas uzsākšanu un sūkņa darbināšanu. Sūkni var vienkārši iesaistīt ēkas automatizācijas sistēmā ar analogajām un digitālajām saskarnēm, kā arī CIF moduļiem.
Specifika/produkta priekšrocības
- IE5 EC motora tehnoloģija un tipiskas regulēšanas funkcijas augstai enerģijas efektivitātei
- Vienkārša darbināšana, pateicoties pārskatāmām izvēlnēm krāsainā displejā un zaļās pogas tehnoloģijai
- Pārbaudītā nerūsējošā tērauda hidraulika nodrošina augstu uzticamību
- Iespējama iesaistīšana ēkas automatizācijā ar analogajām un digitālajām saskarnēm un CIF moduļiem
Bypass kit Helix 2-16
Artikula Nr.: 4146788
Bypass kit for continuous ventilation of Helix pumps in series 2/ 4 / 6 / 10 / 16.
- Comes with pressure gauge.
- Suitable to use for all types of self and normal suction systems, e.g. irrigation, cooling towers etc.
BASE_PLATE_DAMPER_HELIX_PUMP_UP_TO_5.5kW
Artikula Nr.: 4157154
Foot plate is for mounting on foundation or floor. It fits all pumps in the Helix series with a maximum engine power of 5.5 kW.
- Pump housing (pump) is screwed into the foot plate with four bolts (dimension M8 or M10, depending on the pump size - see pump catalogue leaf), recommended length of bolt 40-70 mm.
- The foot plate is equipped with vibration dampers, one in each corner.
- Made of stainless steel.
- Dimensions: 405 x 90 x 405 mm (W x H x D).
SAFETY VALVE R3/4" RG 16BAR G851
Artikula Nr.: 2007147
The safety valve protects the system against overpressure when using water supply and pressure relief systems.
- Activation pressure 10% above the factory preset pressure.
- Allowed media - water without abrasive particles.
- Media temperature max 130 ° C.
- House made of plaster / brass.
- Seal made by Perbunan / EPDM.
IR-Stick WILO Set
Artikula Nr.: 2109467
The IR-Stick in combination with the supplied Wilo software (CD-ROM), makes it possible to read out and save data records for pumps as well as send previously defined pump settings.
- IR carrier frequency: 33 kHz / 455 kHz
- Software upgrade: via USB
- Inaccessibly installed pumps
- Quick configuration of pumps
- Extensive operating information
- Detailed fault diagnosis
- Statistical functions
- Special settings/control modes for special requirements
- Protection against unauthorised access
- Archiving of pump data sets
CONNECTION -VB.WMS-CO-1MVI/MVIS/HELIX-6"
Artikula Nr.: 2504386
ASSEMBLY WMS. DE-EB. +VP
Artikula Nr.: 2521150
Pressure switch as low-water signal transmitter for direct connection to the suction-side pipe provided by the customer.
Connection to the joint tubing Rp ¼' threaded bushing.
The pressure switch locks at 1.0 bar and enables at 1.3 bar (factory works setting in accordance with DIN 1988).
The factory settings cannot be modified.
Connection to the joint tubing Rp ¼' threaded bushing.
The pressure switch locks at 1.0 bar and enables at 1.3 bar (factory works setting in accordance with DIN 1988).
The factory settings cannot be modified.
PRESS.SENSOR 1/4"0-6BAR 4-20MA M12 T528
Artikula Nr.: 2541618
PRESS.SENSOR 1/4" 0-16 BAR
Artikula Nr.: 2541620
PRESS.SENSOR 1/4"0-25BAR 4-20MA M12 T528
Artikula Nr.: 2541621
Cable gland M20x1,5 CIF-Module
Artikula Nr.: 2215131
Cable gland M12 RJ45 CIF-Module Ethernet
Artikula Nr.: 2215132
CIF-Module BACnet
Artikula Nr.: 2190367
Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
CIF-Module CAN
Artikula Nr.: 2190369
Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
CIF-Module LON
Artikula Nr.: 2190370
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
CIF-Module Modbus
Artikula Nr.: 2190368
Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
CIF-Module PLR
Artikula Nr.: 2190371
Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
CIF-Module Ethernet
Artikula Nr.: 2211408
Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
CIF-Modul Modbus TCP
Artikula Nr.: 2211409
Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
Differential Pressure Kit (0-232) 16 bar
Artikula Nr.: 4194670
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Nomaiņas sūknis Apmaiņats komplekts
Produkta nosaukums
Helix2.0-VE 208-1/16/E/KS/3
Artikula Nr.
4250652
MEI
≥ 0,7
IE
5
Kopējais garums
160 mm
Elektropieslēgums
3x400 V
Caurules pieslēgums
Rp 25 PN16
Nominālā strāva
2,0 A
Nominālā jauda P2
1,1 kW
Sūkņa augstums
883 mm
Attālums no grīdas līdz centram
50 mm
Šķidruma temperatūras diapazons
-30 - +120 °C
Komentāri
Saderīgs, neveicot izmaiņas cauruļvadu sistēmā.
Replacement pump equiped with cartridge mechanical seal.
If you are pumping chilled water media or special material requirements, please contact Wilo Technical Inside Sales. Always consult Wilo when pumping media other than water.
Produkta informācija
Helix2.0-VE 208-1/16/E/KS/3
Helix2.0-VE 208-1/16/E/KS/3
Artikula Nr.
: 4250652
Augsta enerģijas efektivitāte pielietojumiem ar auksto ūdeni lielās ēkās.
Wilo-Helix2.0-VE ir jaunākā vertikālo daudzpakāpju sūkņu paaudze aukstā ūdens pielietojumiem lielās ēkās. Iebūvētais frekvences pārveidotājs apvienojumā ar regulēšanas funkcijām un IE5 EC motora piedziņu ļauj optimāli pielāgoties dažādiem spiediena apstākļiem un caurplūdes plūsmām. Rezultāts ir augsta enerģijas efektivitāte gan slēgtās, gan vaļējās iekārtās. Turklāt pārbaudītā Helix nerūsējošā tērauda hidraulika nodrošina augstu uzticamību. Krāsainais displejs ar pārskatāmām izvēlnēm un uzticamā „zaļās pogas tehnoloģija” nodrošina vienkāršu ekspluatācijas uzsākšanu un sūkņa darbināšanu. Sūkni var vienkārši iesaistīt ēkas automatizācijas sistēmā ar analogajām un digitālajām saskarnēm, kā arī CIF moduļiem.
Wilo-Helix2.0-VE ir jaunākā vertikālo daudzpakāpju sūkņu paaudze aukstā ūdens pielietojumiem lielās ēkās. Iebūvētais frekvences pārveidotājs apvienojumā ar regulēšanas funkcijām un IE5 EC motora piedziņu ļauj optimāli pielāgoties dažādiem spiediena apstākļiem un caurplūdes plūsmām. Rezultāts ir augsta enerģijas efektivitāte gan slēgtās, gan vaļējās iekārtās. Turklāt pārbaudītā Helix nerūsējošā tērauda hidraulika nodrošina augstu uzticamību. Krāsainais displejs ar pārskatāmām izvēlnēm un uzticamā „zaļās pogas tehnoloģija” nodrošina vienkāršu ekspluatācijas uzsākšanu un sūkņa darbināšanu. Sūkni var vienkārši iesaistīt ēkas automatizācijas sistēmā ar analogajām un digitālajām saskarnēm, kā arī CIF moduļiem.
Specifika/produkta priekšrocības
- IE5 EC motora tehnoloģija un tipiskas regulēšanas funkcijas augstai enerģijas efektivitātei
- Vienkārša darbināšana, pateicoties pārskatāmām izvēlnēm krāsainā displejā un zaļās pogas tehnoloģijai
- Pārbaudītā nerūsējošā tērauda hidraulika nodrošina augstu uzticamību
- Iespējama iesaistīšana ēkas automatizācijā ar analogajām un digitālajām saskarnēm un CIF moduļiem
Bypass kit Helix 2-16
Artikula Nr.: 4146788
Bypass kit for continuous ventilation of Helix pumps in series 2/ 4 / 6 / 10 / 16.
- Comes with pressure gauge.
- Suitable to use for all types of self and normal suction systems, e.g. irrigation, cooling towers etc.
BASE_PLATE_DAMPER_HELIX_PUMP_UP_TO_5.5kW
Artikula Nr.: 4157154
Foot plate is for mounting on foundation or floor. It fits all pumps in the Helix series with a maximum engine power of 5.5 kW.
- Pump housing (pump) is screwed into the foot plate with four bolts (dimension M8 or M10, depending on the pump size - see pump catalogue leaf), recommended length of bolt 40-70 mm.
- The foot plate is equipped with vibration dampers, one in each corner.
- Made of stainless steel.
- Dimensions: 405 x 90 x 405 mm (W x H x D).
SAFETY VALVE R3/4" RG 16BAR G851
Artikula Nr.: 2007147
The safety valve protects the system against overpressure when using water supply and pressure relief systems.
- Activation pressure 10% above the factory preset pressure.
- Allowed media - water without abrasive particles.
- Media temperature max 130 ° C.
- House made of plaster / brass.
- Seal made by Perbunan / EPDM.
IR-Stick WILO Set
Artikula Nr.: 2109467
The IR-Stick in combination with the supplied Wilo software (CD-ROM), makes it possible to read out and save data records for pumps as well as send previously defined pump settings.
- IR carrier frequency: 33 kHz / 455 kHz
- Software upgrade: via USB
- Inaccessibly installed pumps
- Quick configuration of pumps
- Extensive operating information
- Detailed fault diagnosis
- Statistical functions
- Special settings/control modes for special requirements
- Protection against unauthorised access
- Archiving of pump data sets
CONNECTION -VB.WMS-CO-1MVI/MVIS/HELIX-6"
Artikula Nr.: 2504386
ASSEMBLY WMS. DE-EB. +VP
Artikula Nr.: 2521150
Pressure switch as low-water signal transmitter for direct connection to the suction-side pipe provided by the customer.
Connection to the joint tubing Rp ¼' threaded bushing.
The pressure switch locks at 1.0 bar and enables at 1.3 bar (factory works setting in accordance with DIN 1988).
The factory settings cannot be modified.
Connection to the joint tubing Rp ¼' threaded bushing.
The pressure switch locks at 1.0 bar and enables at 1.3 bar (factory works setting in accordance with DIN 1988).
The factory settings cannot be modified.
PRESS.SENSOR 1/4"0-6BAR 4-20MA M12 T528
Artikula Nr.: 2541618
PRESS.SENSOR 1/4" 0-16 BAR
Artikula Nr.: 2541620
PRESS.SENSOR 1/4"0-25BAR 4-20MA M12 T528
Artikula Nr.: 2541621
Cable gland M20x1,5 CIF-Module
Artikula Nr.: 2215131
Cable gland M12 RJ45 CIF-Module Ethernet
Artikula Nr.: 2215132
CIF-Module BACnet
Artikula Nr.: 2190367
Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
CIF-Module CAN
Artikula Nr.: 2190369
Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
CIF-Module LON
Artikula Nr.: 2190370
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
CIF-Module Modbus
Artikula Nr.: 2190368
Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
CIF-Module PLR
Artikula Nr.: 2190371
Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
CIF-Module Ethernet
Artikula Nr.: 2211408
Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
CIF-Modul Modbus TCP
Artikula Nr.: 2211409
Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
Differential Pressure Kit (0-232) 16 bar
Artikula Nr.: 4194670
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Nomaiņas sūknis Apmaiņats komplekts
Produkta nosaukums
Helix V 410-1/16/E/S/400-50
Artikula Nr.
4201385
MEI
≥ 0,7
IE
3
Kopējais garums
160 mm
Elektropieslēgums
3x400 V
Caurules pieslēgums
Rp 25 PN16
Nominālā strāva
3 A
Nominālā jauda P2
1,5 kW
Sūkņa augstums
825 mm
Attālums no grīdas līdz centram
50 mm
Šķidruma temperatūras diapazons
-30 - +120 °C
Komentāri
Saderīgs, neveicot izmaiņas cauruļvadu sistēmā.
Pārbaudiet darbības punktu, iespējams, piemērots arī Helix V 409.
If you are pumping chilled water media or special material requirements, please contact Wilo Technical Inside Sales. Always consult Wilo when pumping media other than water.
Produkta informācija
Helix V 410-1/16/E/S/400-50
Helix V 410-1/16/E/S/400-50
Artikula Nr.
: 4201385
Your advantages
- Efficiency-optimised, laser-welded 2D/3D hydraulics, flow and degassing optimised
- Corrosion-resistant impellers, guide vanes and stage housings
- Flow and NPSH-optimised pump housing
- Maintenance-friendly design with particularly robust coupling guard
- Drinking water approval for pumps with parts that come in contact with the fluid made of stainless steel (EPDM version)
Non-self-priming, high-efficiency multistage high-pressure centrifugal pump in vertical design with in-line connections.
Application
- Water supply and pressure boosting
- Industrial circulation systems
- Process water
- Closed cooling circuits
- Fire extinguishing systems
- Washing systems
- Irrigation
- Corrosion-resistant impellers, guide vanes and stage housings
- Helix V high-pressure multistage centrifugal pump
- Installation and operating instructions
- Helix V 2 – 16 (version PN16 with oval flanges): counter flanges made of stainless steel with the corresponding screws, nuts and gaskets
- Electrical connection:
- 3~400 V (±10 %), 50 Hz
- ≤ 4 kW 230 V/ 400 V; Δ/Y
- > 4 kW 400 V/ 690 V; Δ/Y
- 1~ 230 V (±10 %), 50 Hz, only Wilo-Helix V 2, 4, 6, 10
- Fluid temperature range:
- Helix V 2 – 16 (EPDM): -30 to 120 °C (130 °C on request)
- Helix V 2 – 16 for aggressive media (FKM): -15 to 90 °C
- Helix V22 – 52 (EPDM): -20 to 120 °C (130 °C on request)
- Helix V22 – 52 for aggressive media (FKM): -15 to 90 °C
- Max. operating pressure: 16/25/30 bar
- Max. inlet pressure of 10 bar
- Protection class: IP 55
- Max. ambient temperature: -15 °C – +50 °C (extended temperature ranges on request)
- Available versions:
- Helix V 2 – 16: PN 16 with oval flanges, PN 25/PN 40 with round flanges according to ISO 2531 and ISO 7005 (Victaulic coupling on request)
- Helix V 22 – 52: PN 16/PN 25/PN 40 with round flanges according to ISO 2531 and ISO 7005
Helix V 2, 4, 6, 10, 16:
Standard version
- Impellers, stage housings and guide vanes made of stainless steel 1.4307 (AISI 304L)
- Pump housing made of stainless steel 1.4301 (AISI 304)
- Baseplate and lantern in EN-GJL-250 (cataphoretic coated)
- Shaft made of stainless steel 1.4301 (AISI 304) or 1.4462 (AISI 318LN) (depending on version)
- Sleeve under the mechanical seal 1.4404 (AISI 316L)
- O-ring of EPDM (FKM gasket on request)
- Jacket pipe made of stainless steel 1.4301 (AISI 304)
- Impellers, stage housings and guide vane apparatuses of stainless steel 1.4404 (AISI 316L)
- Pump housing made of stainless steel 1.4404 (AISI 316L)
- Shaft made of stainless steel 1.4404 (AISI 316L) or 1.4462 (AISI 318LN) (depending on version)
- Sleeve under the mechanical seal 1.4404 (AISI 316L)
- O-ring of FKM (EPDM gasket on request)
- Jacket pipe made of stainless steel 1.4404 (AISI 316L)
Standard version
- Stage housings, impellers, guide vane apparatuses made of stainless steel 1.4307 (AISI 304L)
- Pump housing made of stainless steel 1.4308 (AISI 304) or cataphoretic-coated grey cast iron EN-GJL 250, loose flanges made of cataphoretic-coated grey cast iron EN-GJL 250 for Helix V 22 / EN-GJS 400 for Helix V 36-52.
- Shaft made of stainless steel 1.4057 (AISI 431)
- Sleeve under the mechanical seal 1.4404 (AISI 316L)
- O-ring of EPDM (FKM gasket on request)
- Jacket pipe made of stainless steel 1.4301 (AISI 304)
- Stage housings, impellers, and guide vane apparatuses made of stainless steel 1.4404 (AISI 316L)
- Pump housing: all parts which come in contact with the media are made of cast stainless steel 1.4409 (AISI 316L); loose flanges of cataphoretic-coated grey cast iron EN-GJL 250 for Helix V 22 / EN-GJS 400 for Helix V 36-52.
- Baseplate made of stainless steel 1.4301 (AISI 304)
- Shaft made of stainless steel 1.4404 (AISI 316L) or 1.4462 (AISI 318LN) (depending on version)
- Sleeve under the mechanical seal 1.4404 (AISI 316L)
- O-ring of FKM (EPDM gasket on request)
- Pressure shroud made of stainless steel 1.4404 (AISI 316L)
Description/construction
- Pumps can be adapted to specific circumstances on request (e.g. motor protection, IE4 motor efficiency class, VdS certified Wilo-Helix pumps, ATEX, extended ambient temperature range).
- The Helix series is also available with an integrated frequency converter.
Bypass kit Helix 2-16
Artikula Nr.: 4146788
Bypass kit for continuous ventilation of Helix pumps in series 2/ 4 / 6 / 10 / 16.
- Comes with pressure gauge.
- Suitable to use for all types of self and normal suction systems, e.g. irrigation, cooling towers etc.
BASE_PLATE_DAMPER_HELIX_PUMP_UP_TO_5.5kW
Artikula Nr.: 4157154
Foot plate is for mounting on foundation or floor. It fits all pumps in the Helix series with a maximum engine power of 5.5 kW.
- Pump housing (pump) is screwed into the foot plate with four bolts (dimension M8 or M10, depending on the pump size - see pump catalogue leaf), recommended length of bolt 40-70 mm.
- The foot plate is equipped with vibration dampers, one in each corner.
- Made of stainless steel.
- Dimensions: 405 x 90 x 405 mm (W x H x D).
SAFETY VALVE R3/4" RG 10BAR
Artikula Nr.: 500814696
The safety valve protects the system against overpressure when using water supply and pressure relief systems.
- Activation pressure 10% above the factory preset pressure.
- Allowed media - water without abrasive particles.
- Media temperature max 130 ° C.
- House made of plaster / brass.
- Seal made by Perbunan / EPDM.
SAFETY VALVE R3/4" RG 16BAR G851
Artikula Nr.: 2007147
The safety valve protects the system against overpressure when using water supply and pressure relief systems.
- Activation pressure 10% above the factory preset pressure.
- Allowed media - water without abrasive particles.
- Media temperature max 130 ° C.
- House made of plaster / brass.
- Seal made by Perbunan / EPDM.
CONNECTION -VB.WMS-CO-1MVI/MVIS/HELIX-6"
Artikula Nr.: 2504386
ASSEMBLY WMS. DE-EB. +VP
Artikula Nr.: 2521150
Pressure switch as low-water signal transmitter for direct connection to the suction-side pipe provided by the customer.
Connection to the joint tubing Rp ¼' threaded bushing.
The pressure switch locks at 1.0 bar and enables at 1.3 bar (factory works setting in accordance with DIN 1988).
The factory settings cannot be modified.
Connection to the joint tubing Rp ¼' threaded bushing.
The pressure switch locks at 1.0 bar and enables at 1.3 bar (factory works setting in accordance with DIN 1988).
The factory settings cannot be modified.
PRESS.SENSOR 1/4"0-6BAR 4-20MA M12 T528
Artikula Nr.: 2541618
PRESS.SENSOR 1/4"0-10BAR 4-20MA M12 T528
Artikula Nr.: 2541619
PRESS.SENSOR 1/4" 0-16 BAR
Artikula Nr.: 2541620
PRESS.SENSOR 1/4"0-25BAR 4-20MA M12 T528
Artikula Nr.: 2541621
PRESS.SENSOR 1/4"0-40BAR 4-20MA M12 T528
Artikula Nr.: 2541622
