4 aizvietošanas varianti atrasti

Esošais Sūknis - Daudzpakāpju

Ražotājs Grundfos
Produkta nosaukums CRE 5-9
Kopējais garums 160 mm
Elektropieslēgums 3x400 V
Caurules pieslēgums Rp 32 PN16
Nominālā jauda P2 2,2 kW
Sūkņa augstums 739 mm
Attālums no grīdas līdz centram 50 mm

Nomaiņas sūknis Apmaiņats komplekts

Produkta nosaukums Helix2.0-VE 606-1/16/E/S/3
Artikula Nr. 4250754
MEI ≥ 0,7
IE 5
Kopējais garums 160 mm
Elektropieslēgums 3x400 V
Caurules pieslēgums Rp 32 PN16
Nominālā strāva 3,9 A
Nominālā jauda P2 2,2 kW
Sūkņa augstums 849 mm
Attālums no grīdas līdz centram 50 mm
Šķidruma temperatūras diapazons -30 - +120 °C

Komentāri

Saderīgs, neveicot izmaiņas cauruļvadu sistēmā.
Replacement pump not equiped with cartridge mechanical seal.
Replacement pump has slightly lower capacity. Check duty point.

Produkta informācija
Helix2.0-VE 606-1/16/E/S/3

Helix2.0-VE 606-1/16/E/S/3
Artikula Nr. : 4250754

Augsta enerģijas efektivitāte pielietojumiem ar auksto ūdeni lielās ēkās.
Wilo-Helix2.0-VE ir jaunākā vertikālo daudzpakāpju sūkņu paaudze aukstā ūdens pielietojumiem lielās ēkās. Iebūvētais frekvences pārveidotājs apvienojumā ar regulēšanas funkcijām un IE5 EC motora piedziņu ļauj optimāli pielāgoties dažādiem spiediena apstākļiem un caurplūdes plūsmām. Rezultāts ir augsta enerģijas efektivitāte gan slēgtās, gan vaļējās iekārtās. Turklāt pārbaudītā Helix nerūsējošā tērauda hidraulika nodrošina augstu uzticamību. Krāsainais displejs ar pārskatāmām izvēlnēm un uzticamā „zaļās pogas tehnoloģija” nodrošina vienkāršu ekspluatācijas uzsākšanu un sūkņa darbināšanu. Sūkni var vienkārši iesaistīt ēkas automatizācijas sistēmā ar analogajām un digitālajām saskarnēm, kā arī CIF moduļiem.

Specifika/produkta priekšrocības
  • IE5 EC motora tehnoloģija un tipiskas regulēšanas funkcijas augstai enerģijas efektivitātei
  • Vienkārša darbināšana, pateicoties pārskatāmām izvēlnēm krāsainā displejā un zaļās pogas tehnoloģijai
  • Pārbaudītā nerūsējošā tērauda hidraulika nodrošina augstu uzticamību
  • Iespējama iesaistīšana ēkas automatizācijā ar analogajām un digitālajām saskarnēm un CIF moduļiem
Bypass kit Helix 2-16
Artikula Nr.: 4146788
Bypass batch:
Bypass kit for continuous ventilation of Helix pumps in series 2/ 4 / 6 / 10 / 16.
  • Comes with pressure gauge.
  • Suitable to use for all types of self and normal suction systems, e.g. irrigation, cooling towers etc.
BASE_PLATE_DAMPER_HELIX_PUMP_UP_TO_5.5kW
Artikula Nr.: 4157154
Footplate Helix:
Foot plate is for mounting on foundation or floor. It fits all pumps in the Helix series with a maximum engine power of 5.5 kW.
  • Pump housing (pump) is screwed into the foot plate with four bolts (dimension M8 or M10, depending on the pump size - see pump catalogue leaf), recommended length of bolt 40-70 mm.
  • The foot plate is equipped with vibration dampers, one in each corner.
  • Made of stainless steel.
  • Dimensions: 405 x 90 x 405 mm (W x H x D).
SAFETY VALVE R3/4" RG 10BAR
Artikula Nr.: 500814696
Safety Valve:
The safety valve protects the system against overpressure when using water supply and pressure relief systems.
  • Activation pressure 10% above the factory preset pressure.
  • Allowed media - water without abrasive particles.
  • Media temperature max 130 ° C.
  • House made of plaster / brass.
  • Seal made by Perbunan / EPDM.
Note- the safety valves are only pre-set from the factory.
SAFETY VALVE R3/4" RG 16BAR G851
Artikula Nr.: 2007147
Safety Valve:
The safety valve protects the system against overpressure when using water supply and pressure relief systems.
  • Activation pressure 10% above the factory preset pressure.
  • Allowed media - water without abrasive particles.
  • Media temperature max 130 ° C.
  • House made of plaster / brass.
  • Seal made by Perbunan / EPDM.
Note- the safety valves are only pre-set from the factory.
IR-Stick WILO Set
Artikula Nr.: 2109467
USB stick for wireless data exchange for all electronically controlled Wilo pumps with infra-red interface; can be adapted to any commercially-available Windows PCs/laptops with USB interface.
The IR-Stick in combination with the supplied Wilo software (CD-ROM), makes it possible to read out and save data records for pumps as well as send previously defined pump settings.
 
  • IR carrier frequency: 33 kHz / 455 kHz
  • Software upgrade: via USB
Particularly suitable for:
  • Inaccessibly installed pumps
  • Quick configuration of pumps
  • Extensive operating information
  • Detailed fault diagnosis
  • Statistical functions
  • Special settings/control modes for special requirements
  • Protection against unauthorised access
  • Archiving of pump data sets
CONNECTION -VB.WMS-CO-1MVI/MVIS/HELIX-6"
Artikula Nr.: 2504386

Connection kit for connection of a low-water cut-out switchgear to single-pump pressure boosting systems CO-1 without speed control.
ASSEMBLY WMS. DE-EB. +VP
Artikula Nr.: 2521150

Pressure switch as low-water signal transmitter for direct connection to the suction-side pipe provided by the customer.
Connection to the joint tubing Rp ¼' threaded bushing.
The pressure switch locks at 1.0 bar and enables at 1.3 bar (factory works setting in accordance with DIN 1988).
The factory settings cannot be modified.
PRESS.SENSOR 1/4"0-6BAR 4-20MA M12 T528
Artikula Nr.: 2541618
PRESS.SENSOR 1/4"0-10BAR 4-20MA M12 T528
Artikula Nr.: 2541619
PRESS.SENSOR 1/4" 0-16 BAR
Artikula Nr.: 2541620
Cable gland M20x1,5 CIF-Module
Artikula Nr.: 2215131
Cable gland M12 RJ45 CIF-Module Ethernet
Artikula Nr.: 2215132
CIF-Module BACnet
Artikula Nr.: 2190367

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Module CAN
Artikula Nr.: 2190369

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Module LON
Artikula Nr.: 2190370

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Module Modbus
Artikula Nr.: 2190368

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Module PLR
Artikula Nr.: 2190371

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Module Ethernet
Artikula Nr.: 2211408

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Modul Modbus TCP
Artikula Nr.: 2211409

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
Differential Pressure Kit (0-232) 16 bar
Artikula Nr.: 4194670

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
ASSEMBLY PRESSURE SENSOR 0-16 BAR
Artikula Nr.: 2501886

For mounting an automatic two-pump system with pressure-dependent operation. The pressure sensor measures the applied pressure and delivers signals which can be evaluated by the ER-2 switchgear.

Nomaiņas sūknis Apmaiņats komplekts

Produkta nosaukums Helix2.0-VE 604-1/16/E/KS/3
Artikula Nr. 4250745
MEI ≥ 0,7
IE 5
Kopējais garums 160 mm
Elektropieslēgums 3x400 V
Caurules pieslēgums Rp 32 PN16
Nominālā strāva 2,7 A
Nominālā jauda P2 1,5 kW
Sūkņa augstums 825 mm
Attālums no grīdas līdz centram 50 mm
Šķidruma temperatūras diapazons -30 - +120 °C

Komentāri

Saderīgs, neveicot izmaiņas cauruļvadu sistēmā.
Replacement pump equiped with cartridge mechanical seal.
Nomaiņas sūknim ir nedaudz zemāka jauda. Pārbaudiet darbības punktu.

Produkta informācija
Helix2.0-VE 604-1/16/E/KS/3

Helix2.0-VE 604-1/16/E/KS/3
Artikula Nr. : 4250745

Augsta enerģijas efektivitāte pielietojumiem ar auksto ūdeni lielās ēkās.
Wilo-Helix2.0-VE ir jaunākā vertikālo daudzpakāpju sūkņu paaudze aukstā ūdens pielietojumiem lielās ēkās. Iebūvētais frekvences pārveidotājs apvienojumā ar regulēšanas funkcijām un IE5 EC motora piedziņu ļauj optimāli pielāgoties dažādiem spiediena apstākļiem un caurplūdes plūsmām. Rezultāts ir augsta enerģijas efektivitāte gan slēgtās, gan vaļējās iekārtās. Turklāt pārbaudītā Helix nerūsējošā tērauda hidraulika nodrošina augstu uzticamību. Krāsainais displejs ar pārskatāmām izvēlnēm un uzticamā „zaļās pogas tehnoloģija” nodrošina vienkāršu ekspluatācijas uzsākšanu un sūkņa darbināšanu. Sūkni var vienkārši iesaistīt ēkas automatizācijas sistēmā ar analogajām un digitālajām saskarnēm, kā arī CIF moduļiem.

Specifika/produkta priekšrocības
  • IE5 EC motora tehnoloģija un tipiskas regulēšanas funkcijas augstai enerģijas efektivitātei
  • Vienkārša darbināšana, pateicoties pārskatāmām izvēlnēm krāsainā displejā un zaļās pogas tehnoloģijai
  • Pārbaudītā nerūsējošā tērauda hidraulika nodrošina augstu uzticamību
  • Iespējama iesaistīšana ēkas automatizācijā ar analogajām un digitālajām saskarnēm un CIF moduļiem
Bypass kit Helix 2-16
Artikula Nr.: 4146788
Bypass batch:
Bypass kit for continuous ventilation of Helix pumps in series 2/ 4 / 6 / 10 / 16.
  • Comes with pressure gauge.
  • Suitable to use for all types of self and normal suction systems, e.g. irrigation, cooling towers etc.
BASE_PLATE_DAMPER_HELIX_PUMP_UP_TO_5.5kW
Artikula Nr.: 4157154
Footplate Helix:
Foot plate is for mounting on foundation or floor. It fits all pumps in the Helix series with a maximum engine power of 5.5 kW.
  • Pump housing (pump) is screwed into the foot plate with four bolts (dimension M8 or M10, depending on the pump size - see pump catalogue leaf), recommended length of bolt 40-70 mm.
  • The foot plate is equipped with vibration dampers, one in each corner.
  • Made of stainless steel.
  • Dimensions: 405 x 90 x 405 mm (W x H x D).
SAFETY VALVE R3/4" RG 10BAR
Artikula Nr.: 500814696
Safety Valve:
The safety valve protects the system against overpressure when using water supply and pressure relief systems.
  • Activation pressure 10% above the factory preset pressure.
  • Allowed media - water without abrasive particles.
  • Media temperature max 130 ° C.
  • House made of plaster / brass.
  • Seal made by Perbunan / EPDM.
Note- the safety valves are only pre-set from the factory.
SAFETY VALVE R3/4" RG 16BAR G851
Artikula Nr.: 2007147
Safety Valve:
The safety valve protects the system against overpressure when using water supply and pressure relief systems.
  • Activation pressure 10% above the factory preset pressure.
  • Allowed media - water without abrasive particles.
  • Media temperature max 130 ° C.
  • House made of plaster / brass.
  • Seal made by Perbunan / EPDM.
Note- the safety valves are only pre-set from the factory.
IR-Stick WILO Set
Artikula Nr.: 2109467
USB stick for wireless data exchange for all electronically controlled Wilo pumps with infra-red interface; can be adapted to any commercially-available Windows PCs/laptops with USB interface.
The IR-Stick in combination with the supplied Wilo software (CD-ROM), makes it possible to read out and save data records for pumps as well as send previously defined pump settings.
 
  • IR carrier frequency: 33 kHz / 455 kHz
  • Software upgrade: via USB
Particularly suitable for:
  • Inaccessibly installed pumps
  • Quick configuration of pumps
  • Extensive operating information
  • Detailed fault diagnosis
  • Statistical functions
  • Special settings/control modes for special requirements
  • Protection against unauthorised access
  • Archiving of pump data sets
CONNECTION -VB.WMS-CO-1MVI/MVIS/HELIX-6"
Artikula Nr.: 2504386

Connection kit for connection of a low-water cut-out switchgear to single-pump pressure boosting systems CO-1 without speed control.
ASSEMBLY WMS. DE-EB. +VP
Artikula Nr.: 2521150

Pressure switch as low-water signal transmitter for direct connection to the suction-side pipe provided by the customer.
Connection to the joint tubing Rp ¼' threaded bushing.
The pressure switch locks at 1.0 bar and enables at 1.3 bar (factory works setting in accordance with DIN 1988).
The factory settings cannot be modified.
PRESS.SENSOR 1/4"0-6BAR 4-20MA M12 T528
Artikula Nr.: 2541618
PRESS.SENSOR 1/4"0-10BAR 4-20MA M12 T528
Artikula Nr.: 2541619
PRESS.SENSOR 1/4" 0-16 BAR
Artikula Nr.: 2541620
Cable gland M20x1,5 CIF-Module
Artikula Nr.: 2215131
Cable gland M12 RJ45 CIF-Module Ethernet
Artikula Nr.: 2215132
CIF-Module BACnet
Artikula Nr.: 2190367

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Module CAN
Artikula Nr.: 2190369

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Module LON
Artikula Nr.: 2190370

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Module Modbus
Artikula Nr.: 2190368

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Module PLR
Artikula Nr.: 2190371

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Module Ethernet
Artikula Nr.: 2211408

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Modul Modbus TCP
Artikula Nr.: 2211409

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
Differential Pressure Kit (0-232) 16 bar
Artikula Nr.: 4194670

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
ASSEMBLY PRESSURE SENSOR 0-16 BAR
Artikula Nr.: 2501886

For mounting an automatic two-pump system with pressure-dependent operation. The pressure sensor measures the applied pressure and delivers signals which can be evaluated by the ER-2 switchgear.

Nomaiņas sūknis Apmaiņats komplekts

Produkta nosaukums Helix2.0-VE 608-1/16/E/S/3
Artikula Nr. 4250761
MEI ≥ 0,7
IE 5
Kopējais garums 160 mm
Elektropieslēgums 3x400 V
Caurules pieslēgums Rp 32 PN16
Nominālā strāva 5,3 A
Nominālā jauda P2 3 kW
Sūkņa augstums 934 mm
Attālums no grīdas līdz centram 50 mm
Šķidruma temperatūras diapazons -30 - +120 °C

Komentāri

Saderīgs, neveicot izmaiņas cauruļvadu sistēmā.
Replacement pump not equiped with cartridge mechanical seal.
Nomaiņas sūknim ir lielāka jauda.

Produkta informācija
Helix2.0-VE 608-1/16/E/S/3

Helix2.0-VE 608-1/16/E/S/3
Artikula Nr. : 4250761

Augsta enerģijas efektivitāte pielietojumiem ar auksto ūdeni lielās ēkās.
Wilo-Helix2.0-VE ir jaunākā vertikālo daudzpakāpju sūkņu paaudze aukstā ūdens pielietojumiem lielās ēkās. Iebūvētais frekvences pārveidotājs apvienojumā ar regulēšanas funkcijām un IE5 EC motora piedziņu ļauj optimāli pielāgoties dažādiem spiediena apstākļiem un caurplūdes plūsmām. Rezultāts ir augsta enerģijas efektivitāte gan slēgtās, gan vaļējās iekārtās. Turklāt pārbaudītā Helix nerūsējošā tērauda hidraulika nodrošina augstu uzticamību. Krāsainais displejs ar pārskatāmām izvēlnēm un uzticamā „zaļās pogas tehnoloģija” nodrošina vienkāršu ekspluatācijas uzsākšanu un sūkņa darbināšanu. Sūkni var vienkārši iesaistīt ēkas automatizācijas sistēmā ar analogajām un digitālajām saskarnēm, kā arī CIF moduļiem.

Specifika/produkta priekšrocības
  • IE5 EC motora tehnoloģija un tipiskas regulēšanas funkcijas augstai enerģijas efektivitātei
  • Vienkārša darbināšana, pateicoties pārskatāmām izvēlnēm krāsainā displejā un zaļās pogas tehnoloģijai
  • Pārbaudītā nerūsējošā tērauda hidraulika nodrošina augstu uzticamību
  • Iespējama iesaistīšana ēkas automatizācijā ar analogajām un digitālajām saskarnēm un CIF moduļiem
Bypass kit Helix 2-16
Artikula Nr.: 4146788
Bypass batch:
Bypass kit for continuous ventilation of Helix pumps in series 2/ 4 / 6 / 10 / 16.
  • Comes with pressure gauge.
  • Suitable to use for all types of self and normal suction systems, e.g. irrigation, cooling towers etc.
BASE_PLATE_DAMPER_HELIX_PUMP_UP_TO_5.5kW
Artikula Nr.: 4157154
Footplate Helix:
Foot plate is for mounting on foundation or floor. It fits all pumps in the Helix series with a maximum engine power of 5.5 kW.
  • Pump housing (pump) is screwed into the foot plate with four bolts (dimension M8 or M10, depending on the pump size - see pump catalogue leaf), recommended length of bolt 40-70 mm.
  • The foot plate is equipped with vibration dampers, one in each corner.
  • Made of stainless steel.
  • Dimensions: 405 x 90 x 405 mm (W x H x D).
SAFETY VALVE R3/4" RG 10BAR
Artikula Nr.: 500814696
Safety Valve:
The safety valve protects the system against overpressure when using water supply and pressure relief systems.
  • Activation pressure 10% above the factory preset pressure.
  • Allowed media - water without abrasive particles.
  • Media temperature max 130 ° C.
  • House made of plaster / brass.
  • Seal made by Perbunan / EPDM.
Note- the safety valves are only pre-set from the factory.
SAFETY VALVE R3/4" RG 16BAR G851
Artikula Nr.: 2007147
Safety Valve:
The safety valve protects the system against overpressure when using water supply and pressure relief systems.
  • Activation pressure 10% above the factory preset pressure.
  • Allowed media - water without abrasive particles.
  • Media temperature max 130 ° C.
  • House made of plaster / brass.
  • Seal made by Perbunan / EPDM.
Note- the safety valves are only pre-set from the factory.
IR-Stick WILO Set
Artikula Nr.: 2109467
USB stick for wireless data exchange for all electronically controlled Wilo pumps with infra-red interface; can be adapted to any commercially-available Windows PCs/laptops with USB interface.
The IR-Stick in combination with the supplied Wilo software (CD-ROM), makes it possible to read out and save data records for pumps as well as send previously defined pump settings.
 
  • IR carrier frequency: 33 kHz / 455 kHz
  • Software upgrade: via USB
Particularly suitable for:
  • Inaccessibly installed pumps
  • Quick configuration of pumps
  • Extensive operating information
  • Detailed fault diagnosis
  • Statistical functions
  • Special settings/control modes for special requirements
  • Protection against unauthorised access
  • Archiving of pump data sets
CONNECTION -VB.WMS-CO-1MVI/MVIS/HELIX-6"
Artikula Nr.: 2504386

Connection kit for connection of a low-water cut-out switchgear to single-pump pressure boosting systems CO-1 without speed control.
ASSEMBLY WMS. DE-EB. +VP
Artikula Nr.: 2521150

Pressure switch as low-water signal transmitter for direct connection to the suction-side pipe provided by the customer.
Connection to the joint tubing Rp ¼' threaded bushing.
The pressure switch locks at 1.0 bar and enables at 1.3 bar (factory works setting in accordance with DIN 1988).
The factory settings cannot be modified.
PRESS.SENSOR 1/4"0-10BAR 4-20MA M12 T528
Artikula Nr.: 2541619
PRESS.SENSOR 1/4" 0-16 BAR
Artikula Nr.: 2541620
Cable gland M20x1,5 CIF-Module
Artikula Nr.: 2215131
Cable gland M12 RJ45 CIF-Module Ethernet
Artikula Nr.: 2215132
CIF-Module BACnet
Artikula Nr.: 2190367

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Module CAN
Artikula Nr.: 2190369

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Module LON
Artikula Nr.: 2190370

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Module Modbus
Artikula Nr.: 2190368

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Module PLR
Artikula Nr.: 2190371

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Module Ethernet
Artikula Nr.: 2211408

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Modul Modbus TCP
Artikula Nr.: 2211409

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
Differential Pressure Kit (0-232) 16 bar
Artikula Nr.: 4194670

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
ASSEMBLY PRESSURE SENSOR 0-16 BAR
Artikula Nr.: 2501886

For mounting an automatic two-pump system with pressure-dependent operation. The pressure sensor measures the applied pressure and delivers signals which can be evaluated by the ER-2 switchgear.

Nomaiņas sūknis Apmaiņats komplekts

Produkta nosaukums Helix2.0-VE 608-1/16/E/KS/3
Artikula Nr. 4250758
MEI ≥ 0,7
IE 5
Kopējais garums 160 mm
Elektropieslēgums 3x400 V
Caurules pieslēgums Rp 32 PN16
Nominālā strāva 5,3 A
Nominālā jauda P2 3 kW
Sūkņa augstums 985 mm
Attālums no grīdas līdz centram 50 mm
Šķidruma temperatūras diapazons -30 - +120 °C

Komentāri

Saderīgs, neveicot izmaiņas cauruļvadu sistēmā.
Replacement pump equiped with cartridge mechanical seal.
Nomaiņas sūknim ir lielāka jauda.

Produkta informācija
Helix2.0-VE 608-1/16/E/KS/3

Helix2.0-VE 608-1/16/E/KS/3
Artikula Nr. : 4250758

Augsta enerģijas efektivitāte pielietojumiem ar auksto ūdeni lielās ēkās.
Wilo-Helix2.0-VE ir jaunākā vertikālo daudzpakāpju sūkņu paaudze aukstā ūdens pielietojumiem lielās ēkās. Iebūvētais frekvences pārveidotājs apvienojumā ar regulēšanas funkcijām un IE5 EC motora piedziņu ļauj optimāli pielāgoties dažādiem spiediena apstākļiem un caurplūdes plūsmām. Rezultāts ir augsta enerģijas efektivitāte gan slēgtās, gan vaļējās iekārtās. Turklāt pārbaudītā Helix nerūsējošā tērauda hidraulika nodrošina augstu uzticamību. Krāsainais displejs ar pārskatāmām izvēlnēm un uzticamā „zaļās pogas tehnoloģija” nodrošina vienkāršu ekspluatācijas uzsākšanu un sūkņa darbināšanu. Sūkni var vienkārši iesaistīt ēkas automatizācijas sistēmā ar analogajām un digitālajām saskarnēm, kā arī CIF moduļiem.

Specifika/produkta priekšrocības
  • IE5 EC motora tehnoloģija un tipiskas regulēšanas funkcijas augstai enerģijas efektivitātei
  • Vienkārša darbināšana, pateicoties pārskatāmām izvēlnēm krāsainā displejā un zaļās pogas tehnoloģijai
  • Pārbaudītā nerūsējošā tērauda hidraulika nodrošina augstu uzticamību
  • Iespējama iesaistīšana ēkas automatizācijā ar analogajām un digitālajām saskarnēm un CIF moduļiem
Bypass kit Helix 2-16
Artikula Nr.: 4146788
Bypass batch:
Bypass kit for continuous ventilation of Helix pumps in series 2/ 4 / 6 / 10 / 16.
  • Comes with pressure gauge.
  • Suitable to use for all types of self and normal suction systems, e.g. irrigation, cooling towers etc.
BASE_PLATE_DAMPER_HELIX_PUMP_UP_TO_5.5kW
Artikula Nr.: 4157154
Footplate Helix:
Foot plate is for mounting on foundation or floor. It fits all pumps in the Helix series with a maximum engine power of 5.5 kW.
  • Pump housing (pump) is screwed into the foot plate with four bolts (dimension M8 or M10, depending on the pump size - see pump catalogue leaf), recommended length of bolt 40-70 mm.
  • The foot plate is equipped with vibration dampers, one in each corner.
  • Made of stainless steel.
  • Dimensions: 405 x 90 x 405 mm (W x H x D).
SAFETY VALVE R3/4" RG 10BAR
Artikula Nr.: 500814696
Safety Valve:
The safety valve protects the system against overpressure when using water supply and pressure relief systems.
  • Activation pressure 10% above the factory preset pressure.
  • Allowed media - water without abrasive particles.
  • Media temperature max 130 ° C.
  • House made of plaster / brass.
  • Seal made by Perbunan / EPDM.
Note- the safety valves are only pre-set from the factory.
SAFETY VALVE R3/4" RG 16BAR G851
Artikula Nr.: 2007147
Safety Valve:
The safety valve protects the system against overpressure when using water supply and pressure relief systems.
  • Activation pressure 10% above the factory preset pressure.
  • Allowed media - water without abrasive particles.
  • Media temperature max 130 ° C.
  • House made of plaster / brass.
  • Seal made by Perbunan / EPDM.
Note- the safety valves are only pre-set from the factory.
IR-Stick WILO Set
Artikula Nr.: 2109467
USB stick for wireless data exchange for all electronically controlled Wilo pumps with infra-red interface; can be adapted to any commercially-available Windows PCs/laptops with USB interface.
The IR-Stick in combination with the supplied Wilo software (CD-ROM), makes it possible to read out and save data records for pumps as well as send previously defined pump settings.
 
  • IR carrier frequency: 33 kHz / 455 kHz
  • Software upgrade: via USB
Particularly suitable for:
  • Inaccessibly installed pumps
  • Quick configuration of pumps
  • Extensive operating information
  • Detailed fault diagnosis
  • Statistical functions
  • Special settings/control modes for special requirements
  • Protection against unauthorised access
  • Archiving of pump data sets
CONNECTION -VB.WMS-CO-1MVI/MVIS/HELIX-6"
Artikula Nr.: 2504386

Connection kit for connection of a low-water cut-out switchgear to single-pump pressure boosting systems CO-1 without speed control.
ASSEMBLY WMS. DE-EB. +VP
Artikula Nr.: 2521150

Pressure switch as low-water signal transmitter for direct connection to the suction-side pipe provided by the customer.
Connection to the joint tubing Rp ¼' threaded bushing.
The pressure switch locks at 1.0 bar and enables at 1.3 bar (factory works setting in accordance with DIN 1988).
The factory settings cannot be modified.
PRESS.SENSOR 1/4"0-10BAR 4-20MA M12 T528
Artikula Nr.: 2541619
PRESS.SENSOR 1/4" 0-16 BAR
Artikula Nr.: 2541620
Cable gland M20x1,5 CIF-Module
Artikula Nr.: 2215131
Cable gland M12 RJ45 CIF-Module Ethernet
Artikula Nr.: 2215132
CIF-Module BACnet
Artikula Nr.: 2190367

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Module CAN
Artikula Nr.: 2190369

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Module LON
Artikula Nr.: 2190370

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Module Modbus
Artikula Nr.: 2190368

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Module PLR
Artikula Nr.: 2190371

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Module Ethernet
Artikula Nr.: 2211408

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Modul Modbus TCP
Artikula Nr.: 2211409

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
Differential Pressure Kit (0-232) 16 bar
Artikula Nr.: 4194670

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
ASSEMBLY PRESSURE SENSOR 0-16 BAR
Artikula Nr.: 2501886

For mounting an automatic two-pump system with pressure-dependent operation. The pressure sensor measures the applied pressure and delivers signals which can be evaluated by the ER-2 switchgear.