3 aizvietošanas varianti atrasti

Esošais Sūknis - Cirkulācija Sūkņa līkne

Ražotājs Grundfos
Produkta nosaukums TP 80-270/4
Kopējais garums 620 mm
Elektropieslēgums 3x400 V
Caurules pieslēgums DN 80 PN16

Nomaiņas sūknis - High Efficiency Premium Smart Apmaiņats komplekts

Produkta nosaukums Stratos GIGA2.0-I 80/1-43/7,5
Artikula Nr. 2204752
MEI ≥ 0,7
IE 5
Kopējais garums 360 mm
Elektropieslēgums 3x400 V
Caurules pieslēgums DN 80 PN16
Nominālā strāva 13,8 A
Nominālā jauda P2 7 kW
Šķidruma temperatūras diapazons -20 - +140 °C

Komentāri

Saderīgs ar īpašajiem nomaiņas piederumiem.

Produkta informācija
Stratos GIGA2.0-I 80/1-43/7,5

Stratos GIGA2.0-I 80/1-43/7,5
Artikula Nr. : 2204752

Viedais sausā rotora sūknis apkurei, kondicionēšanai un dzesēšanai lielās ēkās.
Vienmēr ieteicams izmantot augstas efektivitātes Wilo-Stratos GIGA2.0-D, pārvietojot lielu ūdens daudzumu lielā sūknēšanas augstumā. Viedais sausā rotora sūknis Inline izpildījumā piedāvā daudzas saskarnes vairāku sūkņu darbībai, integrēšanai ēku automatizācijā, ekspluatācijas datu iegūšanai un modernas iespējas mobilajai piekļuvei, izmantojot Wilo-Smart Connect. Zaļās pogas tehnoloģija un lielais displejs nodrošina vienkāršu, intuitīvu darbināšanu. Izmantojot iestatīšanas asistentu, tiek nodrošināta optimāla vadība. Optimālu kopējās sistēmas enerģijas efektivitāti nodrošina IE5 EC motortehnoloģijas viedā mijiedarbība ar pārbaudītu sūkņa hidrauliku (MEI ≥0,7) un novatoriskas regulēšanas funkcijas. Jaunā piedziņas tehnoloģija un pārbaudītā sūkņa hidraulika nodrošina augstu uzticamību.

Nomaiņas sūknis - Parastais Apmaiņats komplekts

Produkta nosaukums IPL 80/155-7,5/2
Artikula Nr. 2121232
MEI ≥ 0,4
IE 3
Kopējais garums 400 mm
Elektropieslēgums 3x400 V
Caurules pieslēgums DN 80 PN10
Nominālā strāva 13,7 A
Nominālā jauda P2 7,5 kW
Šķidruma temperatūras diapazons -20 - +120 °C

Komentāri

Saderīgs ar īpašajiem nomaiņas piederumiem.
Nomaiņas sūknis ir aprīkots ar starpatloku DN 80, kas ir saderīgs ar spiediena noslodzi PN 10, L = 220 mm.

Produkta informācija
IPL 80/155-7,5/2

IPL 80/155-7,5/2
Artikula Nr. : 2121232

Your advantages
  • High standard of corrosion protection thanks to cataphoretic coating
  • Standard condensate drainage holes in the motor housings and lanterns
  • Series design: motor with one-piece shaft
  • Version N: Standard motor V1 with stainless steel plug shaft
  • Bidirectional, force-flushed mechanical seal
Construction
Glanded pump in in-line design with screwed connection or flange connection.

Application
Pumping of heating water (acc. to VDI 2035), cold water and water/glycol mixtures without abrasive substances in heating, cold water and cooling systems.

Scope of delivery
  • Pump
  • Installation and operating instructions
Technical data
  • Permissible temperature range -20 °C to +120 °C
  • Mains connection 3~400 V, 50 Hz (others on request)
  • Protection class IP 55
  • Nominal diameter Rp 1 to DN 100
  • Max. operating pressure 10 bar (special version: 16 bar)
Materials
  • Pump housing and lantern: EN-GJL-250
  • Impeller: PPO fibreglass-reinforced EN-GJL-200 (depending on pump type)
  • Shaft: 1.4021
  • Mechanical seal: AQEGG; other mechanical seals on request
Description/construction
Single-stage, low-pressure centrifugal pump in in-line design with: 
  • Mechanical seal
  • Flange connection with pressure measuring connection R 1/8
  • Motor with one-piece shaft
COUNTER FLANGE KIT DN80 PN10
Artikula Nr.: 2105585
Mating flanges:
  • Made of steel.
  • Counter flanges (weld) are delivered complete (in pairs) with bolt, nut and flange gasket.
Flange gasket DN 80 PN6/10
Artikula Nr.: 2175880
Flange gasket DN 80 PN6 / 10, Klingersil:
  • Thickness: 2 mm.
  • Inner diameter: 90 mm.
  • Outer diameter: 132 mm.
Difference pressure sensor 10 m
Artikula Nr.: 2136454

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 20 m
Artikula Nr.: 2136456

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 40 m
Artikula Nr.: 2136458

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 60 m
Artikula Nr.: 503184696

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 100 m
Artikula Nr.: 503184799

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Frekvences pārveidotājs EFC-7,5 kW 3~
Artikula Nr.: 2550228

Nomaiņas sūknis - Parastais Apmaiņats komplekts

Produkta nosaukums Atmos GIGA-I 80/120-7,5/2
Artikula Nr. 2222608
MEI ≥ 0,4
IE 3
Kopējais garums 440 mm
Elektropieslēgums 3x400 V
Caurules pieslēgums DN 80 PN16
Nominālā strāva 13,3 A
Nominālā jauda P2 7,5 kW
Šķidruma temperatūras diapazons -20 - +140 °C

Komentāri

Saderīgs ar īpašajiem nomaiņas piederumiem.

Produkta informācija
Atmos GIGA-I 80/120-7,5/2

Atmos GIGA-I 80/120-7,5/2
Artikula Nr. : 2222608

Konstrukcija
Inline konstrukcijas sausā rotora sūknis ar atloka savienojumu.

Pielietojums
Apkures ūdens (saskaņā ar VDI 2035), aukstā ūdens un ūdens glikola maisījumu bez abrazīvām sastāvdaļām sūknēšanai apkures, aukstā ūdens un dzesēšanas sistēmās.

Tehniskie parametri
  • Pieļaujamais šķidruma temperatūras diapazons -20 °C līdz +140 °C
  • Maks. apkārtējā gaisa temperatūra: 40 °C
  • Elektrotīkla pieslēgums 3~400 V, 50 Hz (citi pieejami pēc pieprasījuma)
  • Aizsardzības pakāpe IP55
  • Nominālais diametrs DN 32 līdz DN 250
  • Standarta modelis, paredzēts darba spiedienam: 13 bar (līdz +140 °C) / 16 bar (līdz +120 °C)
Materiāli
  • Sūkņa korpuss un kupols: Standarts: EN-GJL-250;
  • Darba rats: Standarts: EN-GJL-200; speciālais modelis: Bronza CuSn 10, nerūsējošais tērauds 1.4408
  • Vārpsta: 1.4122
  • Gala blīvējums: AQEGG; citi gala blīvējumi pēc pieprasījuma
Konstrukcija
Vienrindas vienpakāpes zemspiediena centrbēdzes sūknis ar:
  • Gala blīvējums
  • Atloka pieslēgumu un spiediena mērīšanas pieslēgumu R 1/8
  • Starpkorpuss
  • Savienojuma elements
  • IEC standarta motors
Piegādes komplektācija
  • Sūknis
  • Uzstādīšanas un ekspluatācijas instrukcija
COUNTER FLANGE KIT DN80 PN10
Artikula Nr.: 2105585
Mating flanges:
  • Made of steel.
  • Counter flanges (weld) are delivered complete (in pairs) with bolt, nut and flange gasket.
Flange gasket DN 80 PN6/10
Artikula Nr.: 2175880
Flange gasket DN 80 PN6 / 10, Klingersil:
  • Thickness: 2 mm.
  • Inner diameter: 90 mm.
  • Outer diameter: 132 mm.
Difference pressure sensor 10 m
Artikula Nr.: 2136454

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 20 m
Artikula Nr.: 2136456

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 40 m
Artikula Nr.: 2136458

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 60 m
Artikula Nr.: 503184696

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 100 m
Artikula Nr.: 503184799

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Frekvences pārveidotājs EFC-7,5 kW 3~
Artikula Nr.: 2550228