4 aizvietošanas varianti atrasti

Esošais Sūknis - Cirkulācija Sūkņa līkne

Ražotājs Grundfos
Produkta nosaukums TP 80-150/4
Kopējais garums 500 mm
Elektropieslēgums 3x400 V
Caurules pieslēgums DN 80 PN16

Nomaiņas sūknis - High Efficiency Premium Smart Apmaiņats komplekts

Produkta nosaukums Stratos GIGA2.0-I 80/1-24/3,0
Artikula Nr. 2204755
MEI ≥ 0,7
IE 5
Kopējais garums 360 mm
Elektropieslēgums 3x400 V
Caurules pieslēgums DN 80 PN16
Nominālā strāva 5,1 A
Nominālā jauda P2 2,9 kW
Šķidruma temperatūras diapazons -20 - +140 °C

Nomaiņas papildpiederumi

Starpatloku ieliknis F42 DN 80 X 140mm PN10/16
Artikula Nr. 2101158
Numurs 1

Komentāri

Saderīgs ar nomaiņas piederumiem, neveicot izmaiņas cauruļvadu sistēmā.

Produkta informācija
Stratos GIGA2.0-I 80/1-24/3,0

Stratos GIGA2.0-I 80/1-24/3,0
Artikula Nr. : 2204755

Augstas efektivitātes sausā rotora konstrukcijas Inline sūknis ar EC motoru, ar IE5 enerģijas efektivitātes klasi atbilstoši IEC 60034-30-2, hidrauliskajam minimālās efektivitātes indeksam MEI ≥ 0,7 un elektronisko jaudas pielāgošanu sausā rotora sūkņa konstrukcijā. Sūknis ir konstruēts kā vienpakāpes zemspiediena centrbēdzes sūknis ar atloka pieslēgumu un gala blīvējumu. Modelis Stratos GIGA2.0-I ir izstrādāts galvenokārt apkures ūdens (atbilstoši VDI 2035), aukstā ūdens un ūdens glikola maisījumu sūknēšanai, kas nesatur abrazīvas vielas, tas piemērots izmantošanai apkures, kondicionēšanas un dzesēšanas sistēmās.

Konstrukcija
  • Vienpakāpes blokveida konstrukcijas zemspiediena centrbēdzes sūknis ar nedalītu vārpstu
  • Spirālveida korpuss Inline konstrukcijā (sūkšanas un spiediena īscaurules ar vienādiem atlokiem vienā līnijā)
  • Atloki PN 16 - urbumi atbilstoši EN 1092-2
  • Spiediena mērīšanas pieslēgumi (R 1/8) pierīkotam spiedienu starpības sensoram (bez spiedienu starpības sensora –R1 izpildījumā)
  • Sūkņa korpuss un motora atloks sērijveidā ar kataforēzes pārklājumu
  • Gala blīvējums ūdens sūknēšanai līdz Tmax. = +140°C. Līdz T ≤ +40°C ir pieļaujams 20 % līdz 40 % glikola piemaisījums. Ūdens / glikola maisījumiem, kuros glikola daļa ir > 40 % līdz maks. 50 % no tilpuma un šķidruma temperatūra ir no > +40 °C līdz maks. +120 °C vai arī citiem no ūdens atšķirīgiem šķidrumiem, jāparedz alternatīvs gala blīvējums.
  • Pieslēguma spriegumi: 3~440 V ±10% 50/60 Hz; 3~400 V ±10% 50/60 Hz; 3~380 V -5 % +10% 50/60 Hz
Regulēšanas veidi
  • Pastāvīga, automātiska jaudas pielāgošana iekārtas pieprasījumam bez uzdotās vērtības noteikšanas Wilo-Dynamic Adapt plus (rūpnīcas iestatījums).
  • Temperatūra konstanta (T-const.)
  • Temperatūras starpība konstanta (dT-const.)
  • Vajadzībai atbilstoša tīkla sūkņa sūknēšanas plūsmas optimizācija, ko nodrošina tīklojums un komunikācija ar vairākiem rezerves sūkņiem (Multi-Flow Adaptation).
  • Sūknēšanas plūsma konstanta (Q-const.)
  • Mainīga spiedienu starpība (dp-v) ar nominālā darbības punkta izvēles aprīkojumu Q un H
  • Konstanta spiedienu starpība (dp-c)
  • Spiedienu starpības regulēšana dp-c attālā punktā caurulēs (slikto punktu regulēšana)
  • Apgriezienu skaits konstants (n-const.)
  • Lietotāja noteikta PID vadība
Funkcijas
  • Siltuma daudzuma mērīšana
  • Aukstuma daudzuma mērīšana
  • Regulējams sūknēšanas plūsmas ierobežojums, izmantojot Q-Limit funkciju (Qmin. un Qmax.)
  • Divgalvu sūkņa darbības režīmi: Galvenais /rezerves darbības režīms, ar optimizētu lietderības koeficientu paralēlā darbība dp-c und dp-v
  • Automātiska sūkņa izslēgšana, konstatējot, ka nav caurplūdes (No-Flow Stop)
  • Pārslēgšana no apkures un dzesēšanas režīmu (automātiski, ārēji vai manuāli)
  • Konfigurēto sūkņa iestatījumu saglabāšana un atiestatīšanas (3 atiestatīšanas punkti)
  • Traucējuma ziņojuma/brīdinājuma ziņojuma rādījums ar tekstu, ieskaitot traucējuma novēršanas ieteikumu
  • Integrēta pilna motora aizsardzība
Rādījums grafiskā displeja sākuma ekrānā
  • Pašlaik iestatītais regulēšanas princips
  • Aktuālā uzdotā vērtība
  • Aktuālā sūknēšanas plūsma (tikai tad, ja ir pievienots spiediena starpības sensors)
  • Aktuālā šķidruma temperatūra (tikai tad, ja ir pievienots temperatūras sensors)
  • Pašreizējais elektrības patēriņš
  • Kopējais elektrības patēriņš
Modelis
  • 4 konfigurējamas analogās ieejas: 0-10V, 2-10V, 0-20mA, 4-20mA un standarta PT1000 (tikai pie divām analogajām ieejām); barošanas avots ar +24 V DC
  • 2 konfigurējamas digitālās ieejas (Ext. OFF, Ext. Min, Ext. Max, sildīt/dzesēt, manuāla vadība (ēkas automatizācija atslēgta), vadības bloķēšana (taustiņu bloķēšana un tālvadības konfigurācijas aizsardzība))
  • 2 konfigurējami signālu releji darbības un traucējumu ziņojumiem
  • Spraudvieta Wilo CIF moduļiem ar saskarnēm, kas paredzētas ēkas automatizācijai (piederumi pēc izvēles: CIF moduļi Modbus RTU, BACnet MS/TP, LON, PLR, CAN)
  • Wilo Net kā Wilo iekārtas kopne Wilo produktu savstarpējai komunikācijai, piemēram, Multi-Flow Adaptation; divgalvu sūkņa darbības režīms un Wilo-Smart Gateway
  • Automātisks avārijas režīms īpašos stāvokļos (definējams sūkņa apgriezienu skaits), piemēram, kopņu komunikācijas vai sensoru vērtību atteices gadījumā
  • Pagriežams grafisks krāsu displejs (4,3 collu) ar darbināšanu, izmantojot vienas pogas manuālas vadības paneli
  • Bluetooth saskarne, izmantojot Wilo-Smart Connect moduli BT
  • Darbības datu nolasīšana un iestatīšana, kā arī, piemēram, ekspluatācijas uzsākšanas protokola izveidošana ar Bluetooth saskarni, izmantojot lietotni Wilo-Assistant
  • Integrēta divgalvu sūkņa vadība (divgalvu sūkņi ar gatavu vadu savienojumu), izmantojot 2 atsevišķus sūkņus kā divgalvu sūkni, savienojums ar Wilo Net
  • Kabeļa pārrāvuma atpazīšana analogā signāla gadījumā (savienojumā ar 2-10V vai 4-20mA)
  • Laika zīmogs kļūdām/brīdinājumiem un iepriekšējiās darbības datiem
  • Nepārtraukta ekspluatācijas datu uzskaite
  • Sērijveida kondensāta izplūdes atverēm motora korpusā (piegādājot noslēgti)
  • Atgaisošanas vārsts pie starpkorpusa
Piegādes komplektācija
  • Sūknis
  • Wilo-Smart Connect modulis BT
  • Kabeļu skrūvsavienojums ar blīvējošiem ieliktņiem
  • Montāžas instrukcija (saīsināta) un atbilstības deklarācija
Piederumi (jāpasūta atsevišķi)
  • 3 konsoles ar nostiprināšanas materiālu pamatnes izveidei
  • Divgalvu sūkņa korpusam paredzētie slēptie atloki
  • Montāžas palīgelements gala blīvējumam (ieskaitot bultskrūves)
Piesaistīšanai pie ēkas automatizācijas
  • CIF modulis PLR
  • CIF modulis LON
  • CIF modulis BACnet MS/TP
  • CIF modulis Modbus RTU
  • CIF modulis CANopen
  • CIF modulis Ethernet Multiprotocol (Modbus TCP, BACnet/ IP)
  • Spiedienu starpības sensors DDG 2-10V
  • Temperatūras sensors PT1000 AA
  • Sensora ietveres temperatūras sensoru montāžai cauruļvadā
COUNTER FLANGE KIT DN80 PN10
Artikula Nr.: 2105585
Mating flanges:
  • Made of steel.
  • Counter flanges (weld) are delivered complete (in pairs) with bolt, nut and flange gasket.
Flange gasket DN 80 PN6/10
Artikula Nr.: 2175880
Flange gasket DN 80 PN6 / 10, Klingersil:
  • Thickness: 2 mm.
  • Inner diameter: 90 mm.
  • Outer diameter: 132 mm.
Cable gland M20x1,5 CIF-Module
Artikula Nr.: 2215131
Cable gland M12 RJ45 CIF-Module Ethernet
Artikula Nr.: 2215132
PT 1000 AA Sensor f.heating circulation 3m
Artikula Nr.: 2193422

Temperature sensor for installation in immersion sleeve with inside diameter 6.5 mm.
Connection to Stratos Maxo to detect the fluid temperature in the case of temperature-dependent pump control or to detect heating/cooling quantities.
  • Sensor Pt 1000 Class AA, ø6 x 40 mm
  • Cable length: 3 m
  • Measurement range: -5 °C to 70 °C, briefly up to 90 °C
Pipe surface contact sensor Pt 1000 B
Artikula Nr.: 2193421

Temperature sensor for attachment to pipes.
Connection to Stratos Maxo-Z to detect the hot water outlet temperature on the reservoir to detect the thermal disinfection.
  • Sensor Pt 1000 Class B, ø8.5 x 35 mm
  • Cable length 5 m
  • Measurement range -5 °C to 70 °C, briefly up to 90 °C.
Immersion well G 1/2", 45mm
Artikula Nr.: 2193423

Immersion sleeve with PG 7 clamp bolting and silicone rings.
For admission of the immersion sensor Pt 1000 AA for connection to Stratos MAXO.
  • Thread: G 1/2
  • Inner Ø 6.4 mm for sensor to ø6 mm
  • Length of engagement 45 mm for installation in thread T-connector for use with pipes from DN 25 to approx. DN 50
CIF-Module BACnet
Artikula Nr.: 2190367

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Module CAN
Artikula Nr.: 2190369

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Module LON
Artikula Nr.: 2190370

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Module Modbus
Artikula Nr.: 2190368

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Module PLR
Artikula Nr.: 2190371

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
Smart Gateway
Artikula Nr.: 2197100

REG device to establish communication between Wilo products with Wilo Net and the Wilo-Smart Cloud via Internet.
Enables remote monitoring and control of connected products using the Wilo-Smart connect function in the Wilo Assistant app.
CIF-Module Ethernet
Artikula Nr.: 2211408

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Modul Modbus TCP
Artikula Nr.: 2211409

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
Temperature Sensor STM
Artikula Nr.: 2194058
Temperature sensor Stratos MAXO -R7
Temperature sensor intended for Stratos MAXO -R7 and Stratos MAXO-D -R7.

Features:
  • Operation via control mode T-const. and ΔT const.
  • Night setback
  • Measurement of heating and cooling energy
  • Automatic switching between heating / cooling
Difference pressure sensor 10 m
Artikula Nr.: 2136454

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 20 m
Artikula Nr.: 2136456

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.

Nomaiņas sūknis - High Efficiency Premium Smart Apmaiņats komplekts

Produkta nosaukums Stratos GIGA2.0-I 80/1-24/3,0
Artikula Nr. 2204755
MEI ≥ 0,7
IE 5
Kopējais garums 360 mm
Elektropieslēgums 3x400 V
Caurules pieslēgums DN 80 PN16
Nominālā strāva 5,1 A
Nominālā jauda P2 2,9 kW
Šķidruma temperatūras diapazons -20 - +140 °C

Nomaiņas papildpiederumi

Starpatloku ieliknis F42 DN 80 X 140mm PN10/16
Artikula Nr. 2101158
Numurs 1

Komentāri

Saderīgs ar nomaiņas piederumiem, neveicot izmaiņas cauruļvadu sistēmā.
Nomaiņas sūknim ir lielāka jauda.

Produkta informācija
Stratos GIGA2.0-I 80/1-24/3,0

Stratos GIGA2.0-I 80/1-24/3,0
Artikula Nr. : 2204755

Augstas efektivitātes sausā rotora konstrukcijas Inline sūknis ar EC motoru, ar IE5 enerģijas efektivitātes klasi atbilstoši IEC 60034-30-2, hidrauliskajam minimālās efektivitātes indeksam MEI ≥ 0,7 un elektronisko jaudas pielāgošanu sausā rotora sūkņa konstrukcijā. Sūknis ir konstruēts kā vienpakāpes zemspiediena centrbēdzes sūknis ar atloka pieslēgumu un gala blīvējumu. Modelis Stratos GIGA2.0-I ir izstrādāts galvenokārt apkures ūdens (atbilstoši VDI 2035), aukstā ūdens un ūdens glikola maisījumu sūknēšanai, kas nesatur abrazīvas vielas, tas piemērots izmantošanai apkures, kondicionēšanas un dzesēšanas sistēmās.

Konstrukcija
  • Vienpakāpes blokveida konstrukcijas zemspiediena centrbēdzes sūknis ar nedalītu vārpstu
  • Spirālveida korpuss Inline konstrukcijā (sūkšanas un spiediena īscaurules ar vienādiem atlokiem vienā līnijā)
  • Atloki PN 16 - urbumi atbilstoši EN 1092-2
  • Spiediena mērīšanas pieslēgumi (R 1/8) pierīkotam spiedienu starpības sensoram (bez spiedienu starpības sensora –R1 izpildījumā)
  • Sūkņa korpuss un motora atloks sērijveidā ar kataforēzes pārklājumu
  • Gala blīvējums ūdens sūknēšanai līdz Tmax. = +140°C. Līdz T ≤ +40°C ir pieļaujams 20 % līdz 40 % glikola piemaisījums. Ūdens / glikola maisījumiem, kuros glikola daļa ir > 40 % līdz maks. 50 % no tilpuma un šķidruma temperatūra ir no > +40 °C līdz maks. +120 °C vai arī citiem no ūdens atšķirīgiem šķidrumiem, jāparedz alternatīvs gala blīvējums.
  • Pieslēguma spriegumi: 3~440 V ±10% 50/60 Hz; 3~400 V ±10% 50/60 Hz; 3~380 V -5 % +10% 50/60 Hz
Regulēšanas veidi
  • Pastāvīga, automātiska jaudas pielāgošana iekārtas pieprasījumam bez uzdotās vērtības noteikšanas Wilo-Dynamic Adapt plus (rūpnīcas iestatījums).
  • Temperatūra konstanta (T-const.)
  • Temperatūras starpība konstanta (dT-const.)
  • Vajadzībai atbilstoša tīkla sūkņa sūknēšanas plūsmas optimizācija, ko nodrošina tīklojums un komunikācija ar vairākiem rezerves sūkņiem (Multi-Flow Adaptation).
  • Sūknēšanas plūsma konstanta (Q-const.)
  • Mainīga spiedienu starpība (dp-v) ar nominālā darbības punkta izvēles aprīkojumu Q un H
  • Konstanta spiedienu starpība (dp-c)
  • Spiedienu starpības regulēšana dp-c attālā punktā caurulēs (slikto punktu regulēšana)
  • Apgriezienu skaits konstants (n-const.)
  • Lietotāja noteikta PID vadība
Funkcijas
  • Siltuma daudzuma mērīšana
  • Aukstuma daudzuma mērīšana
  • Regulējams sūknēšanas plūsmas ierobežojums, izmantojot Q-Limit funkciju (Qmin. un Qmax.)
  • Divgalvu sūkņa darbības režīmi: Galvenais /rezerves darbības režīms, ar optimizētu lietderības koeficientu paralēlā darbība dp-c und dp-v
  • Automātiska sūkņa izslēgšana, konstatējot, ka nav caurplūdes (No-Flow Stop)
  • Pārslēgšana no apkures un dzesēšanas režīmu (automātiski, ārēji vai manuāli)
  • Konfigurēto sūkņa iestatījumu saglabāšana un atiestatīšanas (3 atiestatīšanas punkti)
  • Traucējuma ziņojuma/brīdinājuma ziņojuma rādījums ar tekstu, ieskaitot traucējuma novēršanas ieteikumu
  • Integrēta pilna motora aizsardzība
Rādījums grafiskā displeja sākuma ekrānā
  • Pašlaik iestatītais regulēšanas princips
  • Aktuālā uzdotā vērtība
  • Aktuālā sūknēšanas plūsma (tikai tad, ja ir pievienots spiediena starpības sensors)
  • Aktuālā šķidruma temperatūra (tikai tad, ja ir pievienots temperatūras sensors)
  • Pašreizējais elektrības patēriņš
  • Kopējais elektrības patēriņš
Modelis
  • 4 konfigurējamas analogās ieejas: 0-10V, 2-10V, 0-20mA, 4-20mA un standarta PT1000 (tikai pie divām analogajām ieejām); barošanas avots ar +24 V DC
  • 2 konfigurējamas digitālās ieejas (Ext. OFF, Ext. Min, Ext. Max, sildīt/dzesēt, manuāla vadība (ēkas automatizācija atslēgta), vadības bloķēšana (taustiņu bloķēšana un tālvadības konfigurācijas aizsardzība))
  • 2 konfigurējami signālu releji darbības un traucējumu ziņojumiem
  • Spraudvieta Wilo CIF moduļiem ar saskarnēm, kas paredzētas ēkas automatizācijai (piederumi pēc izvēles: CIF moduļi Modbus RTU, BACnet MS/TP, LON, PLR, CAN)
  • Wilo Net kā Wilo iekārtas kopne Wilo produktu savstarpējai komunikācijai, piemēram, Multi-Flow Adaptation; divgalvu sūkņa darbības režīms un Wilo-Smart Gateway
  • Automātisks avārijas režīms īpašos stāvokļos (definējams sūkņa apgriezienu skaits), piemēram, kopņu komunikācijas vai sensoru vērtību atteices gadījumā
  • Pagriežams grafisks krāsu displejs (4,3 collu) ar darbināšanu, izmantojot vienas pogas manuālas vadības paneli
  • Bluetooth saskarne, izmantojot Wilo-Smart Connect moduli BT
  • Darbības datu nolasīšana un iestatīšana, kā arī, piemēram, ekspluatācijas uzsākšanas protokola izveidošana ar Bluetooth saskarni, izmantojot lietotni Wilo-Assistant
  • Integrēta divgalvu sūkņa vadība (divgalvu sūkņi ar gatavu vadu savienojumu), izmantojot 2 atsevišķus sūkņus kā divgalvu sūkni, savienojums ar Wilo Net
  • Kabeļa pārrāvuma atpazīšana analogā signāla gadījumā (savienojumā ar 2-10V vai 4-20mA)
  • Laika zīmogs kļūdām/brīdinājumiem un iepriekšējiās darbības datiem
  • Nepārtraukta ekspluatācijas datu uzskaite
  • Sērijveida kondensāta izplūdes atverēm motora korpusā (piegādājot noslēgti)
  • Atgaisošanas vārsts pie starpkorpusa
Piegādes komplektācija
  • Sūknis
  • Wilo-Smart Connect modulis BT
  • Kabeļu skrūvsavienojums ar blīvējošiem ieliktņiem
  • Montāžas instrukcija (saīsināta) un atbilstības deklarācija
Piederumi (jāpasūta atsevišķi)
  • 3 konsoles ar nostiprināšanas materiālu pamatnes izveidei
  • Divgalvu sūkņa korpusam paredzētie slēptie atloki
  • Montāžas palīgelements gala blīvējumam (ieskaitot bultskrūves)
Piesaistīšanai pie ēkas automatizācijas
  • CIF modulis PLR
  • CIF modulis LON
  • CIF modulis BACnet MS/TP
  • CIF modulis Modbus RTU
  • CIF modulis CANopen
  • CIF modulis Ethernet Multiprotocol (Modbus TCP, BACnet/ IP)
  • Spiedienu starpības sensors DDG 2-10V
  • Temperatūras sensors PT1000 AA
  • Sensora ietveres temperatūras sensoru montāžai cauruļvadā
COUNTER FLANGE KIT DN80 PN10
Artikula Nr.: 2105585
Mating flanges:
  • Made of steel.
  • Counter flanges (weld) are delivered complete (in pairs) with bolt, nut and flange gasket.
Flange gasket DN 80 PN6/10
Artikula Nr.: 2175880
Flange gasket DN 80 PN6 / 10, Klingersil:
  • Thickness: 2 mm.
  • Inner diameter: 90 mm.
  • Outer diameter: 132 mm.
Cable gland M20x1,5 CIF-Module
Artikula Nr.: 2215131
Cable gland M12 RJ45 CIF-Module Ethernet
Artikula Nr.: 2215132
PT 1000 AA Sensor f.heating circulation 3m
Artikula Nr.: 2193422

Temperature sensor for installation in immersion sleeve with inside diameter 6.5 mm.
Connection to Stratos Maxo to detect the fluid temperature in the case of temperature-dependent pump control or to detect heating/cooling quantities.
  • Sensor Pt 1000 Class AA, ø6 x 40 mm
  • Cable length: 3 m
  • Measurement range: -5 °C to 70 °C, briefly up to 90 °C
Pipe surface contact sensor Pt 1000 B
Artikula Nr.: 2193421

Temperature sensor for attachment to pipes.
Connection to Stratos Maxo-Z to detect the hot water outlet temperature on the reservoir to detect the thermal disinfection.
  • Sensor Pt 1000 Class B, ø8.5 x 35 mm
  • Cable length 5 m
  • Measurement range -5 °C to 70 °C, briefly up to 90 °C.
Immersion well G 1/2", 45mm
Artikula Nr.: 2193423

Immersion sleeve with PG 7 clamp bolting and silicone rings.
For admission of the immersion sensor Pt 1000 AA for connection to Stratos MAXO.
  • Thread: G 1/2
  • Inner Ø 6.4 mm for sensor to ø6 mm
  • Length of engagement 45 mm for installation in thread T-connector for use with pipes from DN 25 to approx. DN 50
CIF-Module BACnet
Artikula Nr.: 2190367

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Module CAN
Artikula Nr.: 2190369

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Module LON
Artikula Nr.: 2190370

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Module Modbus
Artikula Nr.: 2190368

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Module PLR
Artikula Nr.: 2190371

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
Smart Gateway
Artikula Nr.: 2197100

REG device to establish communication between Wilo products with Wilo Net and the Wilo-Smart Cloud via Internet.
Enables remote monitoring and control of connected products using the Wilo-Smart connect function in the Wilo Assistant app.
CIF-Module Ethernet
Artikula Nr.: 2211408

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
CIF-Modul Modbus TCP
Artikula Nr.: 2211409

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
  • Control commands to the pump
  • Messages from the pump
  • Process values
Temperature Sensor STM
Artikula Nr.: 2194058
Temperature sensor Stratos MAXO -R7
Temperature sensor intended for Stratos MAXO -R7 and Stratos MAXO-D -R7.

Features:
  • Operation via control mode T-const. and ΔT const.
  • Night setback
  • Measurement of heating and cooling energy
  • Automatic switching between heating / cooling
Difference pressure sensor 10 m
Artikula Nr.: 2136454

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 20 m
Artikula Nr.: 2136456

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.

Nomaiņas sūknis - High Efficiency Standarta Apmaiņats komplekts

Produkta nosaukums Yonos GIGA2.0-I 80/1-12/3,0
Artikula Nr. 2205012
MEI ≥ 0,4
IE 5
Kopējais garums 360 mm
Elektropieslēgums 3x400 V
Caurules pieslēgums DN 80 PN10
Nominālā strāva 4,5 A
Nominālā jauda P2 3,0 kW
Šķidruma temperatūras diapazons -20 - +120 °C

Komentāri

Saderīgs ar īpašajiem nomaiņas piederumiem.
Aprīkots ar starpatloku DN 80 PN 10, L = 140 mm.

Produkta informācija
Yonos GIGA2.0-I 80/1-12/3,0

Yonos GIGA2.0-I 80/1-12/3,0
Artikula Nr. : 2205012

Analogās un digitālās saskarnes piedāvā integrācijas iespēju ēkas automatizācijā.
Wilo-Yonos GIGA2.0-I ir elektroniski regulējams Inline sausā rotora sūknis, kas piemērots liela ūdens daudzuma sūknēšanai lielā sūknēšanas augstumā. Pateicoties IE5 EC motora tehnoloģijai un pārbaudītajai sūkņa hidraulikai (MEI ≥0,4), tas nodrošina vienlīdz augstu enerģijas efektivitāti un uzticamību. Jau pazīstamā zaļās pogas tehnoloģija, skaidri pārskatāmās izvēlnes un krāsu displejs nodrošina ļoti vienkāršu vadību. Analogās un digitālās saskarnes piedāvā integrācijas iespēju ēkas automatizācijā.
COUNTER FLANGE KIT DN80 PN10
Artikula Nr.: 2105585
Mating flanges:
  • Made of steel.
  • Counter flanges (weld) are delivered complete (in pairs) with bolt, nut and flange gasket.
Flange gasket DN 80 PN6/10
Artikula Nr.: 2175880
Flange gasket DN 80 PN6 / 10, Klingersil:
  • Thickness: 2 mm.
  • Inner diameter: 90 mm.
  • Outer diameter: 132 mm.
IR-Stick WILO Set
Artikula Nr.: 2109467
USB stick for wireless data exchange for all electronically controlled Wilo pumps with infra-red interface; can be adapted to any commercially-available Windows PCs/laptops with USB interface.
The IR-Stick in combination with the supplied Wilo software (CD-ROM), makes it possible to read out and save data records for pumps as well as send previously defined pump settings.
 
  • IR carrier frequency: 33 kHz / 455 kHz
  • Software upgrade: via USB
Particularly suitable for:
  • Inaccessibly installed pumps
  • Quick configuration of pumps
  • Extensive operating information
  • Detailed fault diagnosis
  • Statistical functions
  • Special settings/control modes for special requirements
  • Protection against unauthorised access
  • Archiving of pump data sets
IR-MONITOR (D,NL,GB,F)
Artikula Nr.: 2017390
Operating and service unit for wireless remote control and remote diagnosis for all Wilo pumps with infra-red interface.
For all pumps and standard motors for measuring the direction of rotation, rotating field frequency and current operating status.
Direction of rotation checking device also for all conventional pumps with alternating or three-phase motor.
Industrial standard due to its sturdy and robust plastic casing, graphical display with scratch-resistant monitor screen.
 
One-button manual operation level for the Wilo high-efficiency and energy-saving pumps, additional 4 buttons for:
  • IR-Monitor on/off
  • Lighting on/off
  • Information/help
Display/monitor (50 x 50 mm) for displaying:
  • Electrical and hydraulic actual values
  • Power supply and duty point of the pump
  • Statistical values
  • Service information
  • Device settings.
Test functions, such as:
  • Self-test pump
  • Self-test IR-Monitor
  • Battery status check.
IF-Module BACnet
Artikula Nr.: 2097811

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
IF-Module CAN
Artikula Nr.: 2085044

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
IF-Module LON
Artikula Nr.: 2022530

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
IF-Module Modbus
Artikula Nr.: 2097809

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

Nomaiņas sūknis - Parastais Apmaiņats komplekts

Produkta nosaukums Atmos GIGA-I 80/180-3/4
Artikula Nr. 2220258
MEI ≥ 0,4
IE 3
Kopējais garums 500 mm
Elektropieslēgums 3x400 V
Caurules pieslēgums DN 80 PN16
Nominālā strāva 6,50 A
Nominālā jauda P2 3 kW
Šķidruma temperatūras diapazons -20 - +140 °C

Komentāri

Saderīgs, neveicot izmaiņas cauruļvadu sistēmā.

Produkta informācija
Atmos GIGA-I 80/180-3/4

Atmos GIGA-I 80/180-3/4
Artikula Nr. : 2220258

Konstrukcija
Inline konstrukcijas sausā rotora sūknis ar atloka savienojumu.

Pielietojums
Apkures ūdens (saskaņā ar VDI 2035), aukstā ūdens un ūdens glikola maisījumu bez abrazīvām sastāvdaļām sūknēšanai apkures, aukstā ūdens un dzesēšanas sistēmās.

Tehniskie parametri
  • Pieļaujamais šķidruma temperatūras diapazons -20 °C līdz +140 °C
  • Maks. apkārtējā gaisa temperatūra: 40 °C
  • Elektrotīkla pieslēgums 3~400 V, 50 Hz (citi pieejami pēc pieprasījuma)
  • Aizsardzības pakāpe IP55
  • Nominālais diametrs DN 32 līdz DN 250
  • Standarta modelis, paredzēts darba spiedienam: 13 bar (līdz +140 °C) / 16 bar (līdz +120 °C)
Materiāli
  • Sūkņa korpuss un kupols: Standarts: EN-GJL-250;
  • Darba rats: Standarts: EN-GJL-200; speciālais modelis: Bronza CuSn 10, nerūsējošais tērauds 1.4408
  • Vārpsta: 1.4122
  • Gala blīvējums: AQEGG; citi gala blīvējumi pēc pieprasījuma
Konstrukcija
Vienrindas vienpakāpes zemspiediena centrbēdzes sūknis ar:
  • Gala blīvējums
  • Atloka pieslēgumu un spiediena mērīšanas pieslēgumu R 1/8
  • Starpkorpuss
  • Savienojuma elements
  • IEC standarta motors
Piegādes komplektācija
  • Sūknis
  • Uzstādīšanas un ekspluatācijas instrukcija
COUNTER FLANGE KIT DN80 PN10
Artikula Nr.: 2105585
Mating flanges:
  • Made of steel.
  • Counter flanges (weld) are delivered complete (in pairs) with bolt, nut and flange gasket.
Flange gasket DN 80 PN6/10
Artikula Nr.: 2175880
Flange gasket DN 80 PN6 / 10, Klingersil:
  • Thickness: 2 mm.
  • Inner diameter: 90 mm.
  • Outer diameter: 132 mm.
SWITCH BOX SK602N
Artikula Nr.: 2120444
Wall-mounted unit for electrical connection of single-phase and three-phase pumps with integrated thermal winding contacts (WSK) for monitoring the winding temperature (full motor protection).
Automatic reactivation of pump after power failure and automatic fault acknowledgement after cooling off of the motor.

Equipment/function:
  • Full motor protection tripping unit for pumps with thermal winding contact (WSK)
  • Switch on/off with integrated run signal light
  • Terminals for external, potential-free activation/deactivation
  • Connection terminal strip
SWITCH BOX SK622N
Artikula Nr.: 2120445
Wall-mounted unit for electrical connection of single-phase and three-phase pumps with integrated thermal winding contacts (WSK) for monitoring the winding temperature (full motor protection) and external run/fault signal.
Automatic reactivation of pump after power failure and automatic fault acknowledgement after cooling off of the motor.

Equipment/function:
  • Full motor protection tripping unit for pumps with thermal winding contact (WSK)
  • Switch on/off with integrated run signal light
  • Fault signal light
  • Terminals for external, potential-free activation/deactivation
  • Potential-free contacts for external run signal (SBM) and fault signal (SSM)
  • Connection terminal strip
Scope of delivery:
  • Switchgear SK 622N
  • 4 threaded cable connections M20
  • Installation and operating instructions
Difference pressure sensor 10 m
Artikula Nr.: 2136454

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 20 m
Artikula Nr.: 2136456

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 40 m
Artikula Nr.: 2136458

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 60 m
Artikula Nr.: 503184696

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 100 m
Artikula Nr.: 503184799

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Frekvences pārveidotājs EFC 3,0 kW 3~
Artikula Nr.: 2551150