3
aizvietošanas varianti atrasti
Esošais Sūknis - Cirkulācija Sūkņa līkne
Ražotājs
Grundfos
Produkta nosaukums
TP 65-190/2
Kopējais garums
360 mm
Elektropieslēgums
3x400 V
Caurules pieslēgums
DN 65 PN16
Nomaiņas sūknis - High Efficiency Premium Smart Apmaiņats komplekts
Produkta nosaukums
Stratos GIGA2.0-I 65/1-31/3,0
Artikula Nr.
2204745
MEI
≥ 0,7
IE
5
Kopējais garums
340 mm
Elektropieslēgums
3x400 V
Caurules pieslēgums
DN 65 PN16
Nominālā strāva
4,9 A
Nominālā jauda P2
2,9 kW
Šķidruma temperatūras diapazons
-20 - +140 °C
Nomaiņas papildpiederumi
Starpatloku ieliknis F10 DN 65 X 20mm PN10/16
Artikula Nr.
110624195
Numurs
1
Komentāri
Saderīgs ar nomaiņas piederumiem, neveicot izmaiņas cauruļvadu sistēmā.
Produkta informācija
Stratos GIGA2.0-I 65/1-31/3,0
Stratos GIGA2.0-I 65/1-31/3,0
Artikula Nr.
: 2204745
Augstas efektivitātes sausā rotora konstrukcijas Inline sūknis ar EC motoru, ar IE5 enerģijas efektivitātes klasi atbilstoši IEC 60034-30-2, hidrauliskajam minimālās efektivitātes indeksam MEI ≥ 0,7 un elektronisko jaudas pielāgošanu sausā rotora sūkņa konstrukcijā. Sūknis ir konstruēts kā vienpakāpes zemspiediena centrbēdzes sūknis ar atloka pieslēgumu un gala blīvējumu. Modelis Stratos GIGA2.0-I ir izstrādāts galvenokārt apkures ūdens (atbilstoši VDI 2035), aukstā ūdens un ūdens glikola maisījumu sūknēšanai, kas nesatur abrazīvas vielas, tas piemērots izmantošanai apkures, kondicionēšanas un dzesēšanas sistēmās.
Konstrukcija
Konstrukcija
- Vienpakāpes blokveida konstrukcijas zemspiediena centrbēdzes sūknis ar nedalītu vārpstu
- Spirālveida korpuss Inline konstrukcijā (sūkšanas un spiediena īscaurules ar vienādiem atlokiem vienā līnijā)
- Atloki PN 16 - urbumi atbilstoši EN 1092-2
- Spiediena mērīšanas pieslēgumi (R 1/8) pierīkotam spiedienu starpības sensoram (bez spiedienu starpības sensora –R1 izpildījumā)
- Sūkņa korpuss un motora atloks sērijveidā ar kataforēzes pārklājumu
- Gala blīvējums ūdens sūknēšanai līdz Tmax. = +140°C. Līdz T ≤ +40°C ir pieļaujams 20 % līdz 40 % glikola piemaisījums. Ūdens / glikola maisījumiem, kuros glikola daļa ir > 40 % līdz maks. 50 % no tilpuma un šķidruma temperatūra ir no > +40 °C līdz maks. +120 °C vai arī citiem no ūdens atšķirīgiem šķidrumiem, jāparedz alternatīvs gala blīvējums.
- Pieslēguma spriegumi: 3~440 V ±10% 50/60 Hz; 3~400 V ±10% 50/60 Hz; 3~380 V -5 % +10% 50/60 Hz
- Pastāvīga, automātiska jaudas pielāgošana iekārtas pieprasījumam bez uzdotās vērtības noteikšanas Wilo-Dynamic Adapt plus (rūpnīcas iestatījums).
- Temperatūra konstanta (T-const.)
- Temperatūras starpība konstanta (dT-const.)
- Vajadzībai atbilstoša tīkla sūkņa sūknēšanas plūsmas optimizācija, ko nodrošina tīklojums un komunikācija ar vairākiem rezerves sūkņiem (Multi-Flow Adaptation).
- Sūknēšanas plūsma konstanta (Q-const.)
- Mainīga spiedienu starpība (dp-v) ar nominālā darbības punkta izvēles aprīkojumu Q un H
- Konstanta spiedienu starpība (dp-c)
- Spiedienu starpības regulēšana dp-c attālā punktā caurulēs (slikto punktu regulēšana)
- Apgriezienu skaits konstants (n-const.)
- Lietotāja noteikta PID vadība
- Siltuma daudzuma mērīšana
- Aukstuma daudzuma mērīšana
- Regulējams sūknēšanas plūsmas ierobežojums, izmantojot Q-Limit funkciju (Qmin. un Qmax.)
- Divgalvu sūkņa darbības režīmi: Galvenais /rezerves darbības režīms, ar optimizētu lietderības koeficientu paralēlā darbība dp-c und dp-v
- Automātiska sūkņa izslēgšana, konstatējot, ka nav caurplūdes (No-Flow Stop)
- Pārslēgšana no apkures un dzesēšanas režīmu (automātiski, ārēji vai manuāli)
- Konfigurēto sūkņa iestatījumu saglabāšana un atiestatīšanas (3 atiestatīšanas punkti)
- Traucējuma ziņojuma/brīdinājuma ziņojuma rādījums ar tekstu, ieskaitot traucējuma novēršanas ieteikumu
- Integrēta pilna motora aizsardzība
- Pašlaik iestatītais regulēšanas princips
- Aktuālā uzdotā vērtība
- Aktuālā sūknēšanas plūsma (tikai tad, ja ir pievienots spiediena starpības sensors)
- Aktuālā šķidruma temperatūra (tikai tad, ja ir pievienots temperatūras sensors)
- Pašreizējais elektrības patēriņš
- Kopējais elektrības patēriņš
- 4 konfigurējamas analogās ieejas: 0-10V, 2-10V, 0-20mA, 4-20mA un standarta PT1000 (tikai pie divām analogajām ieejām); barošanas avots ar +24 V DC
- 2 konfigurējamas digitālās ieejas (Ext. OFF, Ext. Min, Ext. Max, sildīt/dzesēt, manuāla vadība (ēkas automatizācija atslēgta), vadības bloķēšana (taustiņu bloķēšana un tālvadības konfigurācijas aizsardzība))
- 2 konfigurējami signālu releji darbības un traucējumu ziņojumiem
- Spraudvieta Wilo CIF moduļiem ar saskarnēm, kas paredzētas ēkas automatizācijai (piederumi pēc izvēles: CIF moduļi Modbus RTU, BACnet MS/TP, LON, PLR, CAN)
- Wilo Net kā Wilo iekārtas kopne Wilo produktu savstarpējai komunikācijai, piemēram, Multi-Flow Adaptation; divgalvu sūkņa darbības režīms un Wilo-Smart Gateway
- Automātisks avārijas režīms īpašos stāvokļos (definējams sūkņa apgriezienu skaits), piemēram, kopņu komunikācijas vai sensoru vērtību atteices gadījumā
- Pagriežams grafisks krāsu displejs (4,3 collu) ar darbināšanu, izmantojot vienas pogas manuālas vadības paneli
- Bluetooth saskarne, izmantojot Wilo-Smart Connect moduli BT
- Darbības datu nolasīšana un iestatīšana, kā arī, piemēram, ekspluatācijas uzsākšanas protokola izveidošana ar Bluetooth saskarni, izmantojot lietotni Wilo-Assistant
- Integrēta divgalvu sūkņa vadība (divgalvu sūkņi ar gatavu vadu savienojumu), izmantojot 2 atsevišķus sūkņus kā divgalvu sūkni, savienojums ar Wilo Net
- Kabeļa pārrāvuma atpazīšana analogā signāla gadījumā (savienojumā ar 2-10V vai 4-20mA)
- Laika zīmogs kļūdām/brīdinājumiem un iepriekšējiās darbības datiem
- Nepārtraukta ekspluatācijas datu uzskaite
- Sērijveida kondensāta izplūdes atverēm motora korpusā (piegādājot noslēgti)
- Atgaisošanas vārsts pie starpkorpusa
- Sūknis
- Wilo-Smart Connect modulis BT
- Kabeļu skrūvsavienojums ar blīvējošiem ieliktņiem
- Montāžas instrukcija (saīsināta) un atbilstības deklarācija
- 3 konsoles ar nostiprināšanas materiālu pamatnes izveidei
- Divgalvu sūkņa korpusam paredzētie slēptie atloki
- Montāžas palīgelements gala blīvējumam (ieskaitot bultskrūves)
- CIF modulis PLR
- CIF modulis LON
- CIF modulis BACnet MS/TP
- CIF modulis Modbus RTU
- CIF modulis CANopen
- CIF modulis Ethernet Multiprotocol (Modbus TCP, BACnet/ IP)
- Spiedienu starpības sensors DDG 2-10V
- Temperatūras sensors PT1000 AA
- Sensora ietveres temperatūras sensoru montāžai cauruļvadā
COUNTER FLANGE KIT DN65 PN10
Artikula Nr.: 2105583
- Made of steel.
- Counter flanges (weld) are delivered complete (in pairs) with bolt, nut and flange gasket.
Flange gasket DN 65 PN6/10
Artikula Nr.: 2151002
- Thickness: 2 mm.
- Inner diameter: 77 mm.
- Outer diameter: 115 mm.
Cable gland M20x1,5 CIF-Module
Artikula Nr.: 2215131
Cable gland M12 RJ45 CIF-Module Ethernet
Artikula Nr.: 2215132
PT 1000 AA Sensor f.heating circulation 3m
Artikula Nr.: 2193422
Temperature sensor for installation in immersion sleeve with inside diameter 6.5 mm.
Connection to Stratos Maxo to detect the fluid temperature in the case of temperature-dependent pump control or to detect heating/cooling quantities.
Connection to Stratos Maxo to detect the fluid temperature in the case of temperature-dependent pump control or to detect heating/cooling quantities.
- Sensor Pt 1000 Class AA, ø6 x 40 mm
- Cable length: 3 m
- Measurement range: -5 °C to 70 °C, briefly up to 90 °C
Pipe surface contact sensor Pt 1000 B
Artikula Nr.: 2193421
Connection to Stratos Maxo-Z to detect the hot water outlet temperature on the reservoir to detect the thermal disinfection.
- Sensor Pt 1000 Class B, ø8.5 x 35 mm
- Cable length 5 m
- Measurement range -5 °C to 70 °C, briefly up to 90 °C.
Immersion well G 1/2", 45mm
Artikula Nr.: 2193423
Immersion sleeve with PG 7 clamp bolting and silicone rings.
For admission of the immersion sensor Pt 1000 AA for connection to Stratos MAXO.
For admission of the immersion sensor Pt 1000 AA for connection to Stratos MAXO.
- Thread: G 1/2
- Inner Ø 6.4 mm for sensor to ø6 mm
- Length of engagement 45 mm for installation in thread T-connector for use with pipes from DN 25 to approx. DN 50
CIF-Module BACnet
Artikula Nr.: 2190367
Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
CIF-Module CAN
Artikula Nr.: 2190369
Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
CIF-Module LON
Artikula Nr.: 2190370
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
CIF-Module Modbus
Artikula Nr.: 2190368
Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
CIF-Module PLR
Artikula Nr.: 2190371
Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
Smart Gateway
Artikula Nr.: 2197100
REG device to establish communication between Wilo products with Wilo Net and the Wilo-Smart Cloud via Internet.
Enables remote monitoring and control of connected products using the Wilo-Smart connect function in the Wilo Assistant app.
Enables remote monitoring and control of connected products using the Wilo-Smart connect function in the Wilo Assistant app.
CIF-Module Ethernet
Artikula Nr.: 2211408
Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
CIF-Modul Modbus TCP
Artikula Nr.: 2211409
Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
Temperature Sensor STM
Artikula Nr.: 2194058
Temperature sensor intended for Stratos MAXO -R7 and Stratos MAXO-D -R7.
Features:
- Operation via control mode T-const. and ΔT const.
- Night setback
- Measurement of heating and cooling energy
- Automatic switching between heating / cooling
Difference pressure sensor 10 m
Artikula Nr.: 2136454
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 20 m
Artikula Nr.: 2136456
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Nomaiņas sūknis - High Efficiency Premium Smart Apmaiņats komplekts
Produkta nosaukums
Stratos GIGA2.0-I 50/1-37/3,0
Artikula Nr.
2204737
MEI
≥ 0,7
IE
5
Kopējais garums
280 mm
Elektropieslēgums
3x400 V
Caurules pieslēgums
DN 50 PN16
Nominālā strāva
5,1 A
Nominālā jauda P2
3 kW
Šķidruma temperatūras diapazons
-20 - +140 °C
Komentāri
Ievērībai: izmaiņas cauruļvadu sistēmā.
Produkta informācija
Stratos GIGA2.0-I 50/1-37/3,0
Stratos GIGA2.0-I 50/1-37/3,0
Artikula Nr.
: 2204737
Augstas efektivitātes sausā rotora konstrukcijas Inline sūknis ar EC motoru, ar IE5 enerģijas efektivitātes klasi atbilstoši IEC 60034-30-2, hidrauliskajam minimālās efektivitātes indeksam MEI ≥ 0,7 un elektronisko jaudas pielāgošanu sausā rotora sūkņa konstrukcijā. Sūknis ir konstruēts kā vienpakāpes zemspiediena centrbēdzes sūknis ar atloka pieslēgumu un gala blīvējumu. Modelis Stratos GIGA2.0-I ir izstrādāts galvenokārt apkures ūdens (atbilstoši VDI 2035), aukstā ūdens un ūdens glikola maisījumu sūknēšanai, kas nesatur abrazīvas vielas, tas piemērots izmantošanai apkures, kondicionēšanas un dzesēšanas sistēmās.
Konstrukcija
Konstrukcija
- Vienpakāpes blokveida konstrukcijas zemspiediena centrbēdzes sūknis ar nedalītu vārpstu
- Spirālveida korpuss Inline konstrukcijā (sūkšanas un spiediena īscaurules ar vienādiem atlokiem vienā līnijā)
- Atloki PN 16 - urbumi atbilstoši EN 1092-2
- Spiediena mērīšanas pieslēgumi (R 1/8) pierīkotam spiedienu starpības sensoram (bez spiedienu starpības sensora –R1 izpildījumā)
- Sūkņa korpuss un motora atloks sērijveidā ar kataforēzes pārklājumu
- Gala blīvējums ūdens sūknēšanai līdz Tmax. = +140°C. Līdz T ≤ +40°C ir pieļaujams 20 % līdz 40 % glikola piemaisījums. Ūdens / glikola maisījumiem, kuros glikola daļa ir > 40 % līdz maks. 50 % no tilpuma un šķidruma temperatūra ir no > +40 °C līdz maks. +120 °C vai arī citiem no ūdens atšķirīgiem šķidrumiem, jāparedz alternatīvs gala blīvējums.
- Pieslēguma spriegumi: 3~440 V ±10% 50/60 Hz; 3~400 V ±10% 50/60 Hz; 3~380 V -5 % +10% 50/60 Hz
- Pastāvīga, automātiska jaudas pielāgošana iekārtas pieprasījumam bez uzdotās vērtības noteikšanas Wilo-Dynamic Adapt plus (rūpnīcas iestatījums).
- Temperatūra konstanta (T-const.)
- Temperatūras starpība konstanta (dT-const.)
- Vajadzībai atbilstoša tīkla sūkņa sūknēšanas plūsmas optimizācija, ko nodrošina tīklojums un komunikācija ar vairākiem rezerves sūkņiem (Multi-Flow Adaptation).
- Sūknēšanas plūsma konstanta (Q-const.)
- Mainīga spiedienu starpība (dp-v) ar nominālā darbības punkta izvēles aprīkojumu Q un H
- Konstanta spiedienu starpība (dp-c)
- Spiedienu starpības regulēšana dp-c attālā punktā caurulēs (slikto punktu regulēšana)
- Apgriezienu skaits konstants (n-const.)
- Lietotāja noteikta PID vadība
- Siltuma daudzuma mērīšana
- Aukstuma daudzuma mērīšana
- Regulējams sūknēšanas plūsmas ierobežojums, izmantojot Q-Limit funkciju (Qmin. un Qmax.)
- Divgalvu sūkņa darbības režīmi: Galvenais /rezerves darbības režīms, ar optimizētu lietderības koeficientu paralēlā darbība dp-c und dp-v
- Automātiska sūkņa izslēgšana, konstatējot, ka nav caurplūdes (No-Flow Stop)
- Pārslēgšana no apkures un dzesēšanas režīmu (automātiski, ārēji vai manuāli)
- Konfigurēto sūkņa iestatījumu saglabāšana un atiestatīšanas (3 atiestatīšanas punkti)
- Traucējuma ziņojuma/brīdinājuma ziņojuma rādījums ar tekstu, ieskaitot traucējuma novēršanas ieteikumu
- Integrēta pilna motora aizsardzība
- Pašlaik iestatītais regulēšanas princips
- Aktuālā uzdotā vērtība
- Aktuālā sūknēšanas plūsma (tikai tad, ja ir pievienots spiediena starpības sensors)
- Aktuālā šķidruma temperatūra (tikai tad, ja ir pievienots temperatūras sensors)
- Pašreizējais elektrības patēriņš
- Kopējais elektrības patēriņš
- 4 konfigurējamas analogās ieejas: 0-10V, 2-10V, 0-20mA, 4-20mA un standarta PT1000 (tikai pie divām analogajām ieejām); barošanas avots ar +24 V DC
- 2 konfigurējamas digitālās ieejas (Ext. OFF, Ext. Min, Ext. Max, sildīt/dzesēt, manuāla vadība (ēkas automatizācija atslēgta), vadības bloķēšana (taustiņu bloķēšana un tālvadības konfigurācijas aizsardzība))
- 2 konfigurējami signālu releji darbības un traucējumu ziņojumiem
- Spraudvieta Wilo CIF moduļiem ar saskarnēm, kas paredzētas ēkas automatizācijai (piederumi pēc izvēles: CIF moduļi Modbus RTU, BACnet MS/TP, LON, PLR, CAN)
- Wilo Net kā Wilo iekārtas kopne Wilo produktu savstarpējai komunikācijai, piemēram, Multi-Flow Adaptation; divgalvu sūkņa darbības režīms un Wilo-Smart Gateway
- Automātisks avārijas režīms īpašos stāvokļos (definējams sūkņa apgriezienu skaits), piemēram, kopņu komunikācijas vai sensoru vērtību atteices gadījumā
- Pagriežams grafisks krāsu displejs (4,3 collu) ar darbināšanu, izmantojot vienas pogas manuālas vadības paneli
- Bluetooth saskarne, izmantojot Wilo-Smart Connect moduli BT
- Darbības datu nolasīšana un iestatīšana, kā arī, piemēram, ekspluatācijas uzsākšanas protokola izveidošana ar Bluetooth saskarni, izmantojot lietotni Wilo-Assistant
- Integrēta divgalvu sūkņa vadība (divgalvu sūkņi ar gatavu vadu savienojumu), izmantojot 2 atsevišķus sūkņus kā divgalvu sūkni, savienojums ar Wilo Net
- Kabeļa pārrāvuma atpazīšana analogā signāla gadījumā (savienojumā ar 2-10V vai 4-20mA)
- Laika zīmogs kļūdām/brīdinājumiem un iepriekšējiās darbības datiem
- Nepārtraukta ekspluatācijas datu uzskaite
- Sērijveida kondensāta izplūdes atverēm motora korpusā (piegādājot noslēgti)
- Atgaisošanas vārsts pie starpkorpusa
- Sūknis
- Wilo-Smart Connect modulis BT
- Kabeļu skrūvsavienojums ar blīvējošiem ieliktņiem
- Montāžas instrukcija (saīsināta) un atbilstības deklarācija
- 3 konsoles ar nostiprināšanas materiālu pamatnes izveidei
- Divgalvu sūkņa korpusam paredzētie slēptie atloki
- Montāžas palīgelements gala blīvējumam (ieskaitot bultskrūves)
- CIF modulis PLR
- CIF modulis LON
- CIF modulis BACnet MS/TP
- CIF modulis Modbus RTU
- CIF modulis CANopen
- CIF modulis Ethernet Multiprotocol (Modbus TCP, BACnet/ IP)
- Spiedienu starpības sensors DDG 2-10V
- Temperatūras sensors PT1000 AA
- Sensora ietveres temperatūras sensoru montāžai cauruļvadā
COUNTER FLANGE KIT DN50 PN10
Artikula Nr.: 2105581
- Made of steel.
- Counter flanges (weld) are delivered complete (in pairs) with bolt, nut and flange gasket.
Flange gasket DN 50 PN6/10
Artikula Nr.: 2150974
- Thickness: 2 mm.
- Inner diameter: 61 mm.
- Outer diameter: 96 mm.
Cable gland M20x1,5 CIF-Module
Artikula Nr.: 2215131
Cable gland M12 RJ45 CIF-Module Ethernet
Artikula Nr.: 2215132
PT 1000 AA Sensor f.heating circulation 3m
Artikula Nr.: 2193422
Temperature sensor for installation in immersion sleeve with inside diameter 6.5 mm.
Connection to Stratos Maxo to detect the fluid temperature in the case of temperature-dependent pump control or to detect heating/cooling quantities.
Connection to Stratos Maxo to detect the fluid temperature in the case of temperature-dependent pump control or to detect heating/cooling quantities.
- Sensor Pt 1000 Class AA, ø6 x 40 mm
- Cable length: 3 m
- Measurement range: -5 °C to 70 °C, briefly up to 90 °C
Pipe surface contact sensor Pt 1000 B
Artikula Nr.: 2193421
Connection to Stratos Maxo-Z to detect the hot water outlet temperature on the reservoir to detect the thermal disinfection.
- Sensor Pt 1000 Class B, ø8.5 x 35 mm
- Cable length 5 m
- Measurement range -5 °C to 70 °C, briefly up to 90 °C.
Immersion well G 1/2", 45mm
Artikula Nr.: 2193423
Immersion sleeve with PG 7 clamp bolting and silicone rings.
For admission of the immersion sensor Pt 1000 AA for connection to Stratos MAXO.
For admission of the immersion sensor Pt 1000 AA for connection to Stratos MAXO.
- Thread: G 1/2
- Inner Ø 6.4 mm for sensor to ø6 mm
- Length of engagement 45 mm for installation in thread T-connector for use with pipes from DN 25 to approx. DN 50
CIF-Module BACnet
Artikula Nr.: 2190367
Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
CIF-Module CAN
Artikula Nr.: 2190369
Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
CIF-Module LON
Artikula Nr.: 2190370
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
CIF-Module Modbus
Artikula Nr.: 2190368
Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
CIF-Module PLR
Artikula Nr.: 2190371
Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
Smart Gateway
Artikula Nr.: 2197100
REG device to establish communication between Wilo products with Wilo Net and the Wilo-Smart Cloud via Internet.
Enables remote monitoring and control of connected products using the Wilo-Smart connect function in the Wilo Assistant app.
Enables remote monitoring and control of connected products using the Wilo-Smart connect function in the Wilo Assistant app.
CIF-Module Ethernet
Artikula Nr.: 2211408
Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
General functions
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
CIF-Modul Modbus TCP
Artikula Nr.: 2211409
Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
General functions:
Serial, digital interface for connection to building automation (BA) for the transfer of data points as:
- Control commands to the pump
- Messages from the pump
- Process values
Temperature Sensor STM
Artikula Nr.: 2194058
Temperature sensor intended for Stratos MAXO -R7 and Stratos MAXO-D -R7.
Features:
- Operation via control mode T-const. and ΔT const.
- Night setback
- Measurement of heating and cooling energy
- Automatic switching between heating / cooling
Difference pressure sensor 10 m
Artikula Nr.: 2136454
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 20 m
Artikula Nr.: 2136456
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Nomaiņas sūknis - Parastais Apmaiņats komplekts
Produkta nosaukums
IPL 65/120-3/2
Artikula Nr.
2121220
MEI
≥ 0,4
IE
3
Kopējais garums
340 mm
Elektropieslēgums
3x400 V
Caurules pieslēgums
DN 65 PN10
Nominālā strāva
x A
Nominālā jauda P2
3 kW
Šķidruma temperatūras diapazons
-20 - +120 °C
Nomaiņas papildpiederumi
Starpatloku ieliknis F10 DN 65 X 20mm PN10/16
Artikula Nr.
110624195
Numurs
1
Komentāri
Saderīgs ar nomaiņas piederumiem, neveicot izmaiņas cauruļvadu sistēmā.
Produkta informācija
IPL 65/120-3/2
IPL 65/120-3/2
Artikula Nr.
: 2121220
Your advantages
- High standard of corrosion protection thanks to cataphoretic coating
- Standard condensate drainage holes in the motor housings and lanterns
- Series design: motor with one-piece shaft
- Version N: Standard motor V1 with stainless steel plug shaft
- Bidirectional, force-flushed mechanical seal
Glanded pump in in-line design with screwed connection or flange connection.
Application
Pumping of heating water (acc. to VDI 2035), cold water and water/glycol mixtures without abrasive substances in heating, cold water and cooling systems.
Scope of delivery
- Pump
- Installation and operating instructions
- Permissible temperature range -20 °C to +120 °C
- Mains connection 3~400 V, 50 Hz (others on request)
- Protection class IP 55
- Nominal diameter Rp 1 to DN 100
- Max. operating pressure 10 bar (special version: 16 bar)
- Pump housing and lantern: EN-GJL-250
- Impeller: PPO fibreglass-reinforced EN-GJL-200 (depending on pump type)
- Shaft: 1.4021
- Mechanical seal: AQEGG; other mechanical seals on request
Single-stage, low-pressure centrifugal pump in in-line design with:
- Mechanical seal
- Flange connection with pressure measuring connection R 1/8
- Motor with one-piece shaft
COUNTER FLANGE KIT DN65 PN10
Artikula Nr.: 2105583
- Made of steel.
- Counter flanges (weld) are delivered complete (in pairs) with bolt, nut and flange gasket.
Flange gasket DN 65 PN6/10
Artikula Nr.: 2151002
- Thickness: 2 mm.
- Inner diameter: 77 mm.
- Outer diameter: 115 mm.
SWITCH BOX SK602N
Artikula Nr.: 2120444
Automatic reactivation of pump after power failure and automatic fault acknowledgement after cooling off of the motor.
Equipment/function:
- Full motor protection tripping unit for pumps with thermal winding contact (WSK)
- Switch on/off with integrated run signal light
- Terminals for external, potential-free activation/deactivation
- Connection terminal strip
SWITCH BOX SK622N
Artikula Nr.: 2120445
Automatic reactivation of pump after power failure and automatic fault acknowledgement after cooling off of the motor.
Equipment/function:
- Full motor protection tripping unit for pumps with thermal winding contact (WSK)
- Switch on/off with integrated run signal light
- Fault signal light
- Terminals for external, potential-free activation/deactivation
- Potential-free contacts for external run signal (SBM) and fault signal (SSM)
- Connection terminal strip
- Switchgear SK 622N
- 4 threaded cable connections M20
- Installation and operating instructions
Difference pressure sensor 10 m
Artikula Nr.: 2136454
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 20 m
Artikula Nr.: 2136456
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 40 m
Artikula Nr.: 2136458
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 60 m
Artikula Nr.: 503184696
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 100 m
Artikula Nr.: 503184799
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Frekvences pārveidotājs EFC 3,0 kW 3~
Artikula Nr.: 2551150
