1 aizvietošanas variants atrasts

Esošais Sūknis - Cirkulācija

Ražotājs Salmson
Produkta nosaukums SIL 410-27/11
Kopējais garums 550 mm
Elektropieslēgums 3x400 V
Caurules pieslēgums DN 100 PN16

Nomaiņas sūknis - Parastais Apmaiņats komplekts

Produkta nosaukums IL 100/270-11/4
Artikula Nr. 2120791
MEI ≥ 0,4
IE 3
Kopējais garums 550 mm
Elektropieslēgums 3x400 V
Caurules pieslēgums DN 100 PN16
Nominālā strāva 22,2 A
Nominālā jauda P2 11 kW
Šķidruma temperatūras diapazons -20 - +140 °C

Komentāri

Saderīgs, neveicot izmaiņas cauruļvadu sistēmā.

Produkta informācija
IL 100/270-11/4

IL 100/270-11/4
Artikula Nr.: 2120791

Your advantages
  • Reduced life cycle costs thanks to optimized efficiency
  • Standard condensate drainage holes in the motor housings
  • Can be used flexibly in air-conditioning and cooling systems, with application benefits due to direct draining of condensate via optimised lantern design (patented)
  • High standard of corrosion protection thanks to cataphoretic coating
  • High worldwide availability of standard motors (according to Wilo specifications) and standard mechanical seals
Construction
Glanded pump in in-line design with flange connection.

Application
Pumping of heating water (acc. to VDI 2035), cold water and water/glycol mixtures without abrasive substances in heating, cold water and cooling systems.

Scope of delivery
  • Pump
  • Installation and operating instructions
Technical data
  • Permissible temperature range -20 °C to +140 °C
  • Mains connection 3~400 V, 50 Hz (others on request)
  • Protection class IP 55
  • Nominal diameter DN 32 to DN 250
  • Max. operating pressure 16 bar (25 bar on request)
Materials
  • Pump housing and lantern: Standard: EN-GJL-250; optionally spheroidal cast iron EN-GJS-400-18-LT
  • Impeller: Standard: EN-GJL-200; special version: Bronze CuSn 10
  • Shaft: 1.4122
  • Mechanical seal: AQEGG; other mechanical seals on request
Description/construction
Single-stage, low-pressure centrifugal pump in in-line design with:
  • Mechanical seal
  • Flange connection with pressure measuring connection R 1/8
  • Lantern
  • Coupling
  • IEC standard motor
COUNTER FLANGE KIT DN100 PN10
Artikula Nr.: 2105587
Mating flanges:
  • Made of steel.
  • Counter flanges (weld) are delivered complete (in pairs) with bolt, nut and flange gasket.
Flange gasket DN 100 PN6/10
Artikula Nr.: 2153115
Flange gasket DN 100 PN6 / 10, Klingersil:
  • Thickness: 2 mm.
  • Inner diameter: 115 mm.
  • Outer diameter: 152 mm.
Difference pressure sensor 10 m
Artikula Nr.: 2136454

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 20 m
Artikula Nr.: 2136456

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 40 m
Artikula Nr.: 2136458

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 60 m
Artikula Nr.: 503184696

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 100 m
Artikula Nr.: 503184799

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Frekvences pārveidotājs EFC-11 kW 3~
Artikula Nr.: 2550229