1
aizvietošanas variants atrasts
Esošais Sūknis - Cirkulācija
Ražotājs
Salmson
Produkta nosaukums
SIL 410-22/4
Kopējais garums
550 mm
Elektropieslēgums
3x400 V
Caurules pieslēgums
DN 100 PN16
Nomaiņas sūknis - Parastais Apmaiņats komplekts
Produkta nosaukums
Atmos GIGA-I 100/180-4/4
Artikula Nr.
2219074
MEI
≥ 0,4
IE
3
Kopējais garums
550 mm
Elektropieslēgums
3x400 V
Caurules pieslēgums
DN 100 PN16
Nominālā strāva
8,20 A
Nominālā jauda P2
4 kW
Šķidruma temperatūras diapazons
-20 - +140 °C
Komentāri
Saderīgs, neveicot izmaiņas cauruļvadu sistēmā.
Produkta informācija
Atmos GIGA-I 100/180-4/4
Atmos GIGA-I 100/180-4/4
Artikula Nr.
: 2219074
Konstrukcija
Inline konstrukcijas sausā rotora sūknis ar atloka savienojumu.
Pielietojums
Apkures ūdens (saskaņā ar VDI 2035), aukstā ūdens un ūdens glikola maisījumu bez abrazīvām sastāvdaļām sūknēšanai apkures, aukstā ūdens un dzesēšanas sistēmās.
Tehniskie parametri
Vienrindas vienpakāpes zemspiediena centrbēdzes sūknis ar:
Inline konstrukcijas sausā rotora sūknis ar atloka savienojumu.
Pielietojums
Apkures ūdens (saskaņā ar VDI 2035), aukstā ūdens un ūdens glikola maisījumu bez abrazīvām sastāvdaļām sūknēšanai apkures, aukstā ūdens un dzesēšanas sistēmās.
Tehniskie parametri
- Pieļaujamais šķidruma temperatūras diapazons -20 °C līdz +140 °C
- Maks. apkārtējā gaisa temperatūra: 40 °C
- Elektrotīkla pieslēgums 3~400 V, 50 Hz (citi pieejami pēc pieprasījuma)
- Aizsardzības pakāpe IP55
- Nominālais diametrs DN 32 līdz DN 250
- Standarta modelis, paredzēts darba spiedienam: 13 bar (līdz +140 °C) / 16 bar (līdz +120 °C)
- Sūkņa korpuss un kupols: Standarts: EN-GJL-250;
- Darba rats: Standarts: EN-GJL-200; speciālais modelis: Bronza CuSn 10, nerūsējošais tērauds 1.4408
- Vārpsta: 1.4122
- Gala blīvējums: AQEGG; citi gala blīvējumi pēc pieprasījuma
Vienrindas vienpakāpes zemspiediena centrbēdzes sūknis ar:
- Gala blīvējums
- Atloka pieslēgumu un spiediena mērīšanas pieslēgumu R 1/8
- Starpkorpuss
- Savienojuma elements
- IEC standarta motors
- Sūknis
- Uzstādīšanas un ekspluatācijas instrukcija
COUNTER FLANGE KIT DN100 PN10
Artikula Nr.: 2105587
- Made of steel.
- Counter flanges (weld) are delivered complete (in pairs) with bolt, nut and flange gasket.
Flange gasket DN 100 PN6/10
Artikula Nr.: 2153115
- Thickness: 2 mm.
- Inner diameter: 115 mm.
- Outer diameter: 152 mm.
SWITCH BOX SK602N
Artikula Nr.: 2120444
Automatic reactivation of pump after power failure and automatic fault acknowledgement after cooling off of the motor.
Equipment/function:
- Full motor protection tripping unit for pumps with thermal winding contact (WSK)
- Switch on/off with integrated run signal light
- Terminals for external, potential-free activation/deactivation
- Connection terminal strip
SWITCH BOX SK622N
Artikula Nr.: 2120445
Automatic reactivation of pump after power failure and automatic fault acknowledgement after cooling off of the motor.
Equipment/function:
- Full motor protection tripping unit for pumps with thermal winding contact (WSK)
- Switch on/off with integrated run signal light
- Fault signal light
- Terminals for external, potential-free activation/deactivation
- Potential-free contacts for external run signal (SBM) and fault signal (SSM)
- Connection terminal strip
- Switchgear SK 622N
- 4 threaded cable connections M20
- Installation and operating instructions
Difference pressure sensor 10 m
Artikula Nr.: 2136454
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 20 m
Artikula Nr.: 2136456
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 40 m
Artikula Nr.: 2136458
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 60 m
Artikula Nr.: 503184696
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 100 m
Artikula Nr.: 503184799
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Frekvences pārveidotājs EFC 4,0 kW 3~
Artikula Nr.: 2551152
