2
aizvietošanas varianti atrasti
Esošais Sūknis - Cirkulācija
Ražotājs
Grundfos
Produkta nosaukums
LPD 80-125/117
Kopējais garums
500 mm
Elektropieslēgums
3x400 V
Caurules pieslēgums
DN 80 PN10
Nomaiņas sūknis - High Efficiency Premium Smart Apmaiņats komplekts
Produkta nosaukums
Stratos GIGA2.0-D 80/1-20/2,2
Artikula Nr.
2205640
MEI
≥ 0,7
IE
5
Kopējais garums
360 mm
Elektropieslēgums
3x400 V
Caurules pieslēgums
DN 80 PN16
Nominālā strāva
3,8 A
Nominālā jauda P2
2,2 kW
Šķidruma temperatūras diapazons
-20 - +140 °C
Nomaiņas papildpiederumi
Starpatloku ieliknis F42 DN 80 X 140mm PN10/16
Artikula Nr.
2101158
Numurs
1
Komentāri
Saderīgs ar nomaiņas piederumiem, neveicot izmaiņas cauruļvadu sistēmā.
Produkta informācija
Stratos GIGA2.0-D 80/1-20/2,2
Stratos GIGA2.0-D 80/1-20/2,2
Artikula Nr.
: 2205640
Viedais sausā rotora sūknis apkurei, kondicionēšanai un dzesēšanai lielās ēkās.
Vienmēr ieteicams izmantot augstas efektivitātes Wilo-Stratos GIGA2.0-D, pārvietojot lielu ūdens daudzumu lielā sūknēšanas augstumā. Viedais sausā rotora sūknis Inline izpildījumā piedāvā daudzas saskarnes vairāku sūkņu darbībai, integrēšanai ēku automatizācijā, ekspluatācijas datu iegūšanai un modernas iespējas mobilajai piekļuvei, izmantojot Wilo-Smart Connect. Zaļās pogas tehnoloģija un lielais displejs nodrošina vienkāršu, intuitīvu darbināšanu. Izmantojot iestatīšanas asistentu, tiek nodrošināta optimāla vadība. Optimālu kopējās sistēmas enerģijas efektivitāti nodrošina IE5 EC motortehnoloģijas viedā mijiedarbība ar pārbaudītu sūkņa hidrauliku (MEI ≥0,7) un novatoriskas regulēšanas funkcijas. Jaunā piedziņas tehnoloģija un pārbaudītā sūkņa hidraulika nodrošina augstu uzticamību.
Nomaiņas sūknis - Parastais Apmaiņats komplekts
Produkta nosaukums
DL 65/220-3/4
Artikula Nr.
2120959
MEI
≥ 0,4
IE
3
Kopējais garums
475 mm
Elektropieslēgums
3x400 V
Caurules pieslēgums
DN 65 PN16
Nominālā strāva
5,0 A
Šķidruma temperatūras diapazons
-20 - +140 °C
Komentāri
Ievērībai: izmaiņas cauruļvadu sistēmā.
Produkta informācija
DL 65/220-3/4
DL 65/220-3/4
Artikula Nr.
: 2120959
Your advantages
- Reduced life cycle costs through optimised efficiency
- Can be used flexibly in air-conditioning and cooling systems, with application benefits due to direct draining of condensate via optimised lantern design (patented)
- High standard of corrosion protection thanks to cataphoretic coating
- Main/standby mode or peak-load operation (by means of external auxiliary device)
Glanded twin-head pump in in-line design with flange connection.
Application
Pumping of heating water (acc. to VDI 2035), cold water and water/glycol mixtures without abrasive substances in heating, cold water and cooling systems.
Scope of delivery
- Pump
- Installation and operating instructions
- Permissible temperature range -20 °C to +140 °C
- Mains connection 3~400 V, 50 Hz (others on request)
- Protection class IP 55
- Nominal diameter DN 32 to DN 200
- Max. operating pressure 16 bar
- Pump housing and lantern: Standard: EN-GJL-250
- Impeller: Standard: EN-GJL-200; special version: Bronze CuSn 10
- Shaft: 1.4122
- Mechanical seal: AQEGG; other mechanical seals on request
Single-stage, low-pressure twin-head pump in in-line design with:
- Switchover valve
- Mechanical seal
- Flange connection with pressure measuring connection R 1/8
- Lantern
- Coupling
- IEC standard motor
COUNTER FLANGE KIT DN65 PN10
Artikula Nr.: 2105583
- Made of steel.
- Counter flanges (weld) are delivered complete (in pairs) with bolt, nut and flange gasket.
BLIND-FLANGE P270 KIT
Artikula Nr.: 2042861
- Comes in a complete kit containing a lid and gasket.
Flange gasket DN 65 PN6/10
Artikula Nr.: 2151002
- Thickness: 2 mm.
- Inner diameter: 77 mm.
- Outer diameter: 115 mm.
Difference pressure sensor 10 m
Artikula Nr.: 2136454
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 20 m
Artikula Nr.: 2136456
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 40 m
Artikula Nr.: 2136458
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 60 m
Artikula Nr.: 503184696
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 100 m
Artikula Nr.: 503184799
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Frekvences pārveidotājs EFC 3,0 kW 3~
Artikula Nr.: 2551150
