3
aizvietošanas varianti atrasti
Esošais Sūknis - Cirkulācija Sūkņa līkne
Ražotājs
Vecais Wilo
Produkta nosaukums
IPn 150/224-7,5/4
Kopējais garums
700 mm
Elektropieslēgums
3x400 V
Caurules pieslēgums
DN 125 PN16
Nominālā jauda P2
7,5 kW
Nomaiņas sūknis - High Efficiency Premium Smart Apmaiņats komplekts
Produkta nosaukums
Stratos GIGA2.0-I 125/1-17/7,5
Artikula Nr.
2204777
MEI
≥ 0,7
IE
5
Kopējais garums
620 mm
Elektropieslēgums
3x400 V
Caurules pieslēgums
DN 125 PN16
Nominālā strāva
14,8 A
Nominālā jauda P2
7,1 kW
Šķidruma temperatūras diapazons
-20 - +140 °C
Komentāri
Ievērībai: izmaiņas cauruļvadu sistēmā.
If you are pumping chilled water media or special material requirements, please contact Wilo Technical Inside Sales. Replacement pumps designed for glycolin-infused water (max. 50%) have the -S1 extension and a different part number than standard seal pumps. Always consult Wilo when pumping media other than water.
Produkta informācija
Stratos GIGA2.0-I 125/1-17/7,5
Stratos GIGA2.0-I 125/1-17/7,5
Artikula Nr.
: 2204777
Viedais sausā rotora sūknis apkurei, kondicionēšanai un dzesēšanai lielās ēkās.
Vienmēr ieteicams izmantot augstas efektivitātes Wilo-Stratos GIGA2.0-D, pārvietojot lielu ūdens daudzumu lielā sūknēšanas augstumā. Viedais sausā rotora sūknis Inline izpildījumā piedāvā daudzas saskarnes vairāku sūkņu darbībai, integrēšanai ēku automatizācijā, ekspluatācijas datu iegūšanai un modernas iespējas mobilajai piekļuvei, izmantojot Wilo-Smart Connect. Zaļās pogas tehnoloģija un lielais displejs nodrošina vienkāršu, intuitīvu darbināšanu. Izmantojot iestatīšanas asistentu, tiek nodrošināta optimāla vadība. Optimālu kopējās sistēmas enerģijas efektivitāti nodrošina IE5 EC motortehnoloģijas viedā mijiedarbība ar pārbaudītu sūkņa hidrauliku (MEI ≥0,7) un novatoriskas regulēšanas funkcijas. Jaunā piedziņas tehnoloģija un pārbaudītā sūkņa hidraulika nodrošina augstu uzticamību.
Nomaiņas sūknis - Parastais Apmaiņats komplekts
Produkta nosaukums
Atmos GIGA-I 150/180-7,5/4
Artikula Nr.
2219110
MEI
≥ 0,4
IE
3
Kopējais garums
700 mm
Elektropieslēgums
3x400 V
Caurules pieslēgums
DN 150 PN16
Nominālā strāva
14,9 A
Nominālā jauda P2
7,5 kW
Šķidruma temperatūras diapazons
-20 - +140 °C
Komentāri
Saderīgs, neveicot izmaiņas cauruļvadu sistēmā.
If you are pumping chilled water media or special material requirements, please contact Wilo Technical Inside Sales. Replacement pumps designed for glycolin-infused water (max. 50%) have the -S1 extension and a different part number than standard seal pumps. Always consult Wilo when pumping media other than water.
Produkta informācija
Atmos GIGA-I 150/180-7,5/4
Atmos GIGA-I 150/180-7,5/4
Artikula Nr.
: 2219110
Konstrukcija
Inline konstrukcijas sausā rotora sūknis ar atloka savienojumu.
Pielietojums
Apkures ūdens (saskaņā ar VDI 2035), aukstā ūdens un ūdens glikola maisījumu bez abrazīvām sastāvdaļām sūknēšanai apkures, aukstā ūdens un dzesēšanas sistēmās.
Tehniskie parametri
Vienrindas vienpakāpes zemspiediena centrbēdzes sūknis ar:
Inline konstrukcijas sausā rotora sūknis ar atloka savienojumu.
Pielietojums
Apkures ūdens (saskaņā ar VDI 2035), aukstā ūdens un ūdens glikola maisījumu bez abrazīvām sastāvdaļām sūknēšanai apkures, aukstā ūdens un dzesēšanas sistēmās.
Tehniskie parametri
- Pieļaujamais šķidruma temperatūras diapazons -20 °C līdz +140 °C
- Maks. apkārtējā gaisa temperatūra: 40 °C
- Elektrotīkla pieslēgums 3~400 V, 50 Hz (citi pieejami pēc pieprasījuma)
- Aizsardzības pakāpe IP55
- Nominālais diametrs DN 32 līdz DN 250
- Standarta modelis, paredzēts darba spiedienam: 13 bar (līdz +140 °C) / 16 bar (līdz +120 °C)
- Sūkņa korpuss un kupols: Standarts: EN-GJL-250;
- Darba rats: Standarts: EN-GJL-200; speciālais modelis: Bronza CuSn 10, nerūsējošais tērauds 1.4408
- Vārpsta: 1.4122
- Gala blīvējums: AQEGG; citi gala blīvējumi pēc pieprasījuma
Vienrindas vienpakāpes zemspiediena centrbēdzes sūknis ar:
- Gala blīvējums
- Atloka pieslēgumu un spiediena mērīšanas pieslēgumu R 1/8
- Starpkorpuss
- Savienojuma elements
- IEC standarta motors
- Sūknis
- Uzstādīšanas un ekspluatācijas instrukcija
Flange gasket DN 150 PN6/10
Artikula Nr.: 2529887
- Thickness: 2 mm.
- Inner diameter: 168 mm.
- Outer diameter: 225 mm.
Difference pressure sensor 10 m
Artikula Nr.: 2136454
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 20 m
Artikula Nr.: 2136456
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 40 m
Artikula Nr.: 2136458
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 60 m
Artikula Nr.: 503184696
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 100 m
Artikula Nr.: 503184799
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Frekvences pārveidotājs EFC-7,5 kW 3~
Artikula Nr.: 2550228
Nomaiņas sūknis - Parastais Apmaiņats komplekts
Produkta nosaukums
Atmos GIGA-I 125/200-7,5/4
Artikula Nr.
2220298
MEI
≥ 0,4
IE
3
Kopējais garums
620 mm
Elektropieslēgums
3x400 V
Caurules pieslēgums
DN 125 PN16
Nominālā strāva
14,9 A
Nominālā jauda P2
7,5 kW
Šķidruma temperatūras diapazons
-20 - +140 °C
Komentāri
Ievērībai: izmaiņas cauruļvadu sistēmā.
If you are pumping chilled water media or special material requirements, please contact Wilo Technical Inside Sales. Replacement pumps designed for glycolin-infused water (max. 50%) have the -S1 extension and a different part number than standard seal pumps. Always consult Wilo when pumping media other than water.
Produkta informācija
Atmos GIGA-I 125/200-7,5/4
Atmos GIGA-I 125/200-7,5/4
Artikula Nr.
: 2220298
Konstrukcija
Inline konstrukcijas sausā rotora sūknis ar atloka savienojumu.
Pielietojums
Apkures ūdens (saskaņā ar VDI 2035), aukstā ūdens un ūdens glikola maisījumu bez abrazīvām sastāvdaļām sūknēšanai apkures, aukstā ūdens un dzesēšanas sistēmās.
Tehniskie parametri
Vienrindas vienpakāpes zemspiediena centrbēdzes sūknis ar:
Inline konstrukcijas sausā rotora sūknis ar atloka savienojumu.
Pielietojums
Apkures ūdens (saskaņā ar VDI 2035), aukstā ūdens un ūdens glikola maisījumu bez abrazīvām sastāvdaļām sūknēšanai apkures, aukstā ūdens un dzesēšanas sistēmās.
Tehniskie parametri
- Pieļaujamais šķidruma temperatūras diapazons -20 °C līdz +140 °C
- Maks. apkārtējā gaisa temperatūra: 40 °C
- Elektrotīkla pieslēgums 3~400 V, 50 Hz (citi pieejami pēc pieprasījuma)
- Aizsardzības pakāpe IP55
- Nominālais diametrs DN 32 līdz DN 250
- Standarta modelis, paredzēts darba spiedienam: 13 bar (līdz +140 °C) / 16 bar (līdz +120 °C)
- Sūkņa korpuss un kupols: Standarts: EN-GJL-250;
- Darba rats: Standarts: EN-GJL-200; speciālais modelis: Bronza CuSn 10, nerūsējošais tērauds 1.4408
- Vārpsta: 1.4122
- Gala blīvējums: AQEGG; citi gala blīvējumi pēc pieprasījuma
Vienrindas vienpakāpes zemspiediena centrbēdzes sūknis ar:
- Gala blīvējums
- Atloka pieslēgumu un spiediena mērīšanas pieslēgumu R 1/8
- Starpkorpuss
- Savienojuma elements
- IEC standarta motors
- Sūknis
- Uzstādīšanas un ekspluatācijas instrukcija
Flange gasket DN 125 PN6/10
Artikula Nr.: 2529886
- Thickness: 2 mm.
- Inner diameter: 142 mm.
- Outer diameter: 195 mm.
Difference pressure sensor 10 m
Artikula Nr.: 2136454
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 20 m
Artikula Nr.: 2136456
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 40 m
Artikula Nr.: 2136458
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 60 m
Artikula Nr.: 503184696
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 100 m
Artikula Nr.: 503184799
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Frekvences pārveidotājs EFC-7,5 kW 3~
Artikula Nr.: 2550228
