1
aizvietošanas variants atrasts
Esošais Sūknis - Cirkulācija
Ražotājs
Vecais Wilo
Produkta nosaukums
IL 150/370-45/4
Artikula Nr.
2160662
Kopējais garums
940 mm
Elektropieslēgums
3x400 V
Caurules pieslēgums
DN 150 PN16
Nominālā jauda P2
45 kW
Nomaiņas sūknis - Parastais Apmaiņats komplekts
Produkta nosaukums
Atmos GIGA-I 150/370-45/4
Artikula Nr.
2220492
MEI
≥ 0,4
IE
3
Kopējais garums
940 mm
Elektropieslēgums
3x400 V
Caurules pieslēgums
DN 150 PN16
Nominālā strāva
83,1 A
Nominālā jauda P2
45 kW
Šķidruma temperatūras diapazons
-20 - +140 °C
Komentāri
Saderīgs, neveicot izmaiņas cauruļvadu sistēmā.
Produkta informācija
Atmos GIGA-I 150/370-45/4
Atmos GIGA-I 150/370-45/4
Artikula Nr.
: 2220492
Konstrukcija
Inline konstrukcijas sausā rotora sūknis ar atloka savienojumu.
Pielietojums
Apkures ūdens (saskaņā ar VDI 2035), aukstā ūdens un ūdens glikola maisījumu bez abrazīvām sastāvdaļām sūknēšanai apkures, aukstā ūdens un dzesēšanas sistēmās.
Tehniskie parametri
Vienrindas vienpakāpes zemspiediena centrbēdzes sūknis ar:
Inline konstrukcijas sausā rotora sūknis ar atloka savienojumu.
Pielietojums
Apkures ūdens (saskaņā ar VDI 2035), aukstā ūdens un ūdens glikola maisījumu bez abrazīvām sastāvdaļām sūknēšanai apkures, aukstā ūdens un dzesēšanas sistēmās.
Tehniskie parametri
- Pieļaujamais šķidruma temperatūras diapazons -20 °C līdz +140 °C
- Maks. apkārtējā gaisa temperatūra: 40 °C
- Elektrotīkla pieslēgums 3~400 V, 50 Hz (citi pieejami pēc pieprasījuma)
- Aizsardzības pakāpe IP55
- Nominālais diametrs DN 32 līdz DN 250
- Standarta modelis, paredzēts darba spiedienam: 13 bar (līdz +140 °C) / 16 bar (līdz +120 °C)
- Sūkņa korpuss un kupols: Standarts: EN-GJL-250;
- Darba rats: Standarts: EN-GJL-200; speciālais modelis: Bronza CuSn 10, nerūsējošais tērauds 1.4408
- Vārpsta: 1.4122
- Gala blīvējums: AQEGG; citi gala blīvējumi pēc pieprasījuma
Vienrindas vienpakāpes zemspiediena centrbēdzes sūknis ar:
- Gala blīvējums
- Atloka pieslēgumu un spiediena mērīšanas pieslēgumu R 1/8
- Starpkorpuss
- Savienojuma elements
- IEC standarta motors
- Sūknis
- Uzstādīšanas un ekspluatācijas instrukcija
Mounting bracket F 3-18 set
Artikula Nr.: 2040969
- Complete kit.
- For mounting on foundations.
- Comes in a bag.
Flange gasket DN 150 PN6/10
Artikula Nr.: 2529887
- Thickness: 2 mm.
- Inner diameter: 168 mm.
- Outer diameter: 225 mm.
Difference pressure sensor 10 m
Artikula Nr.: 2136454
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 20 m
Artikula Nr.: 2136456
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 40 m
Artikula Nr.: 2136458
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 60 m
Artikula Nr.: 503184696
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 100 m
Artikula Nr.: 503184799
The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Frekvences pārveidotājs EFC-45 kW 3~
Artikula Nr.: 2550223
