1 aizvietošanas variants atrasts

Esošais Sūknis - Cirkulācija

Ražotājs Vecais Wilo
Produkta nosaukums IL 100/295-11/4
Artikula Nr. 2169793
Kopējais garums 700 mm
Elektropieslēgums 3x400 V
Caurules pieslēgums DN 100 PN16
Nominālā jauda P2 11 kW

Nomaiņas sūknis - Parastais Apmaiņats komplekts

Produkta nosaukums Atmos GIGA-I 100/295-11/4
Artikula Nr. 2220386
MEI ≥ 0,4
IE 3
Kopējais garums 700 mm
Elektropieslēgums 3x400 V
Caurules pieslēgums DN 100 PN16
Nominālā strāva 22,0 A
Nominālā jauda P2 11 kW
Šķidruma temperatūras diapazons -20 - +140 °C

Komentāri

Saderīgs, neveicot izmaiņas cauruļvadu sistēmā.

Produkta informācija
Atmos GIGA-I 100/295-11/4

Atmos GIGA-I 100/295-11/4
Artikula Nr. : 2220386

Konstrukcija
Inline konstrukcijas sausā rotora sūknis ar atloka savienojumu.

Pielietojums
Apkures ūdens (saskaņā ar VDI 2035), aukstā ūdens un ūdens glikola maisījumu bez abrazīvām sastāvdaļām sūknēšanai apkures, aukstā ūdens un dzesēšanas sistēmās.

Tehniskie parametri
  • Pieļaujamais šķidruma temperatūras diapazons -20 °C līdz +140 °C
  • Maks. apkārtējā gaisa temperatūra: 40 °C
  • Elektrotīkla pieslēgums 3~400 V, 50 Hz (citi pieejami pēc pieprasījuma)
  • Aizsardzības pakāpe IP55
  • Nominālais diametrs DN 32 līdz DN 250
  • Standarta modelis, paredzēts darba spiedienam: 13 bar (līdz +140 °C) / 16 bar (līdz +120 °C)
Materiāli
  • Sūkņa korpuss un kupols: Standarts: EN-GJL-250;
  • Darba rats: Standarts: EN-GJL-200; speciālais modelis: Bronza CuSn 10, nerūsējošais tērauds 1.4408
  • Vārpsta: 1.4122
  • Gala blīvējums: AQEGG; citi gala blīvējumi pēc pieprasījuma
Konstrukcija
Vienrindas vienpakāpes zemspiediena centrbēdzes sūknis ar:
  • Gala blīvējums
  • Atloka pieslēgumu un spiediena mērīšanas pieslēgumu R 1/8
  • Starpkorpuss
  • Savienojuma elements
  • IEC standarta motors
Piegādes komplektācija
  • Sūknis
  • Uzstādīšanas un ekspluatācijas instrukcija
Flange gasket DN 100 PN6/10
Artikula Nr.: 2153115
Flange gasket DN 100 PN6 / 10, Klingersil:
  • Thickness: 2 mm.
  • Inner diameter: 115 mm.
  • Outer diameter: 152 mm.
Difference pressure sensor 10 m
Artikula Nr.: 2136454

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 20 m
Artikula Nr.: 2136456

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 40 m
Artikula Nr.: 2136458

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 60 m
Artikula Nr.: 503184696

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 100 m
Artikula Nr.: 503184799

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Frekvences pārveidotājs EFC-11 kW 3~
Artikula Nr.: 2550229