2 aizvietošanas varianti atrasti

Esošais Sūknis - Cirkulācija Sūkņa līkne

Ražotājs Flygt, ITT, Lowara, Xylem
Produkta nosaukums AL 1128-346 5,5 kW
Kopējais garums 700 mm
Elektropieslēgums 3x400 V
Caurules pieslēgums DN 125 PN10

Nomaiņas sūknis - Electronic Apmaiņats komplekts

Produkta nosaukums IL-E 80/140-7,5/2
Artikula Nr. 2159322
MEI ≥ 0,4
IE 4
Kopējais garums 400 mm
Elektropieslēgums 3x400 V
Caurules pieslēgums DN 80 PN16
Nominālā strāva 13,7 A
Nominālā jauda P2 7,5 kW
Šķidruma temperatūras diapazons -20 - +140 °C

Komentāri

Ievērībai: izmaiņas cauruļvadu sistēmā.

Produkta informācija
IL-E 80/140-7,5/2

IL-E 80/140-7,5/2
Artikula Nr.: 2159322

Your advantages
  • Energy savings due to integrated electronic power adjustment
  • Optional interfaces for bus communication using plug-in IF-Modules
  • Simple operation with Green Button Technology and display
  • Integrated dual pump management
  • Integrated full motor protection (PTC thermistor sensor) with trip electronics
Construction
Electronically controlled glanded single pump in in-line design with flange connection and automatic power adjustment.

Application
Pumping of heating water (acc. to VDI 2035), cold water and water/glycol mixtures without abrasive substances in heating, cold water and cooling systems.

Equipment/function
Operating modes:
  • Δp-c for constant differential pressure
  • Δp-v for variable differential pressure
  • PID control
  • Constant speed (n=constant)
Manual operation level
  • Green button and display
Manual functions
  • Differential pressure setpoint setting
  • Setting the speed (manual control mode)
  • Setting the operating mode
  • Setting the pump ON/OFF
  • Configuration of all operating parameters
  • Fault acknowledgement
External control functions
  • "Overriding Off" control input
  • “External pump cycling” control input (effective only in dual pump operation)
  • Analogue input 0 – 10 V, 0 – 20 mA for constant speed (DDC) and remote setpoint adjustment
  • Analogue input 2 – 10 V, 4 – 20 mA for constant speed (DDC) and remote setpoint adjustment
  • Analogue input 0 – 10 V for actual value signal from pressure sensor
  • Analogue input 2 – 10 V, 0 – 20 mA, 4 – 20 mA for actual value signal from pressure sensor
Signal and display functions
  • Collective fault signal SSM
  • Collective run signal SBM
Data exchange
  • Infrared interface for wireless data exchange with IR-Monitor/IR-Stick
  • Plug-in position for Wilo IF-Modules (Modbus, BACnet, CAN, PLR, LON) for connection to building automation
Safety functions
  • Full motor protection with integrated trip electronics
  • Access disable
Dual pump management (twin-head pump or 2 x single pumps)
  • Main/standby operation (automatic fault-actuated switchover)
  • Pump cycling main/standby operation after 24 hours
  • Parallel operation
  • Parallel operation (efficiency-optimised peak-load activation and deactivation)
Scope of delivery
  • Pump
  • Installation and operating instructions
Technical data
  • Permissible temperature range of -20 °C to +140 °C
  • Mains connection
  • 3~440 V ±10 %, 50/60 Hz
  • 3~400 V ±10 %, 50/60 Hz
  • 3~380 V -5 % +10 %, 50/60 Hz
  • Protection class IP 55
  • Nominal diameter DN 40 to DN 200
  • Max. operating pressure 16 bar up to +120 °C, 13 bar up to +140 °C
Materials
  • Pump housing and lantern: EN-GJL-250
  • Impeller
  • Standard version: EN-GJL-200
  • Special version: Bronze CuSn 10
  • Shaft: 1.4122
  • Mechanical seal: AQEGG; other mechanical seals on request
Description/construction
Single-stage, low-pressure centrifugal pump in in-line design with: 
  • Mechanical seal
  • Flange connection
  • Lantern
  • Coupling
  • Drive with integrated electronic speed control
COUNTER FLANGE KIT DN80 PN10
Artikula Nr.: 2105585
Mating flanges:
  • Made of steel.
  • Counter flanges (weld) are delivered complete (in pairs) with bolt, nut and flange gasket.
Flange gasket DN 80 PN6/10
Artikula Nr.: 2175880
Flange gasket DN 80 PN6 / 10, Klingersil:
  • Thickness: 2 mm.
  • Inner diameter: 90 mm.
  • Outer diameter: 132 mm.
IF-Module BACnet
Artikula Nr.: 2097811

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
IF-Module CAN
Artikula Nr.: 2085044

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
IF-Module LON
Artikula Nr.: 2022530

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.
IF-Module Modbus
Artikula Nr.: 2097809

Interface modules as retrofittable plug-in modules for extending the communication interfaces of the pump in accordance with various standards and protocol variants according to type key.

Nomaiņas sūknis - Parastais Apmaiņats komplekts

Produkta nosaukums Atmos GIGA-I 125/190-5,5/4
Artikula Nr. 2220300
MEI ≥ 0,4
IE 3
Kopējais garums 620 mm
Elektropieslēgums 3x400 V
Caurules pieslēgums DN 125 PN16
Nominālā strāva 11,1 A
Nominālā jauda P2 5,5 kW
Šķidruma temperatūras diapazons -20 - +140 °C

Komentāri

Saderīgs ar īpašajiem nomaiņas piederumiem.

Produkta informācija
Atmos GIGA-I 125/190-5,5/4

Atmos GIGA-I 125/190-5,5/4
Artikula Nr.: 2220300

Konstrukcija
Inline konstrukcijas sausā rotora sūknis ar atloka savienojumu.

Pielietojums
Apkures ūdens (saskaņā ar VDI 2035), aukstā ūdens un ūdens glikola maisījumu bez abrazīvām sastāvdaļām sūknēšanai apkures, aukstā ūdens un dzesēšanas sistēmās.

Tehniskie parametri
  • Pieļaujamais šķidruma temperatūras diapazons -20 °C līdz +140 °C
  • Maks. apkārtējā gaisa temperatūra: 40 °C
  • Elektrotīkla pieslēgums 3~400 V, 50 Hz (citi pieejami pēc pieprasījuma)
  • Aizsardzības pakāpe IP55
  • Nominālais diametrs DN 32 līdz DN 250
  • Standarta modelis, paredzēts darba spiedienam: 13 bar (līdz +140 °C) / 16 bar (līdz +120 °C)
Materiāli
  • Sūkņa korpuss un kupols: Standarts: EN-GJL-250;
  • Darba rats: Standarts: EN-GJL-200; speciālais modelis: Bronza CuSn 10, nerūsējošais tērauds 1.4408
  • Vārpsta: 1.4122
  • Gala blīvējums: AQEGG; citi gala blīvējumi pēc pieprasījuma
Konstrukcija
Vienrindas vienpakāpes zemspiediena centrbēdzes sūknis ar:
  • Gala blīvējums
  • Atloka pieslēgumu un spiediena mērīšanas pieslēgumu R 1/8
  • Starpkorpuss
  • Savienojuma elements
  • IEC standarta motors
Piegādes komplektācija
  • Sūknis
  • Uzstādīšanas un ekspluatācijas instrukcija
Mounting bracket F 3-18 set
Artikula Nr.: 2040969
Mounting feet F 3-18:
  • Complete kit.
  • For mounting on foundations.
  • Comes in a bag.
Flange gasket DN 125 PN6/10
Artikula Nr.: 2529886
Flange gasket DN 125 PN6 / 10, Klingersil:
  • Thickness: 2 mm.
  • Inner diameter: 142 mm.
  • Outer diameter: 195 mm.
Difference pressure sensor 10 m
Artikula Nr.: 2136454

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 20 m
Artikula Nr.: 2136456

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 40 m
Artikula Nr.: 2136458

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 60 m
Artikula Nr.: 503184696

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Difference pressure sensor 100 m
Artikula Nr.: 503184799

The differential pressure sensor kit enables dp-c and dp-v control of the frequency-controlled high-pressure centrifugal pumps.
The sensor measures the differential pressure between the suction ports and discharge ports to the pipes, and converts this into an electrical signal 4-20 mA, which is used by the frequency converter to regulate the pressure of the pump. The value of the output current is proportional to the differential pressure.
Frekvences pārveidotājs EFC 5,5 kW 3~
Artikula Nr.: 2551154